Skip to content
  • In stock
PSA 2.0 16V 16V XU10J4 Ep: 1.3mm Joint de culasse renforcé COMETIC PEUGEOT 306 S16 RS ACAV XU10J4R/405 T16 XU10J4TE PSA 2.0 16V 16V XU10J4 Ep: 1.3mm Joint de culasse renforcé COMETIC PEUGEOT 306 S16 RS ACAV XU10J4R/405 T16 XU10J4TE

Reinforced head gasket Peugeot Citroën 2.0 16V EW10 XU10J4R

€114.05 (tax incl.)
€152.07 (tax incl.) -25%

Reinforced Athena head gasket, in multi-layer MLS. Sold individually, one gasket per engine.

  • Brand: Athena
  • Engines: EW10J4, EW10J4S, EW10D, RFN, XU10J4R (Peugeot et Citroën 2.0 16V)
  • Bore: 86.0 mm
  • Thickness: 1.0 or 1.3 mm
  • Replaces: 0209.Z3, 0209.EP, 0209.EQ, 0209.N6
338265R
1 in stock in France
4 in stock in Europe (72h lead time)
Pay in installments

The Peugeot and Citroën engines covered

The petrol engines EW10J4, EW10J4S, EW10D and XU10J4R, PSA two-litre sixteen-valve four-cylinders, are the engines covered by this page; the NGK code RFN designates the EW10J4. They power Peugeot 206, 306, 307, 406, 407, 605, 607, 806, 807 and Expert and Citroën C4, C5, C8, Xsara, Xantia, XM, Evasion and Jumpy models, listed in the compatibility table below.

Four original gaskets are fitted to these engines: 0209.Z3, 0209.EP and 0209.EQ for the EW10 family, 0209.N6 for the XU10J4R. Peugeot and Citroën publish neither their bore, nor their thickness, nor their construction. They are sized for standard combustion pressure: as soon as it rises, the clamping load drops, the head lifts and coolant passes into a cylinder.

Reinforced cylinder head gaskets

It is the head studs or bolts that provide half of the sealing on their own: the gasket never works alone. A composite gasket is crushed for good from 100 N/mm², whereas the 301 stainless steel of an MLS gasket resists 517 N/mm², five times more, and regains its shape with every combustion.

This page groups two part numbers from Athena, an Italian maker of racing gaskets, for a single construction: the multi-layer steel MLS. Both have a 86.0 mm bore and differ only in thickness, 1.0 or 1.3 mm. As a rule, the gasket bore chosen is at least 0.5 mm larger than the actual cylinder bore. Each part number is sold individually, one gasket per engine.

Technical specifications

Gasket bore Thickness Gasket volume Gasket type
OEM not specified
OEM not specified
OEM not specified
OEM not specified
Brand Part number
OEM 0209.Z3 (EW10J4S, EW10J4, EW10D, RFN)
OEM 0209.EP (EW10J4S, EW10J4, EW10D, RFN)
OEM 0209.EQ (EW10J4S, EW10J4, EW10D, RFN)
OEM 0209.N6 (XU10J4R)
86 mm 1.00 mm 5.81 MLS Athena 338265R
86 mm 1.30 mm 7.55 MLS Athena 338266R

Gasket volume is the room it leaves free above each cylinder. It adds to the combustion chamber and lowers the compression ratio; as both part numbers share the same bore, the 1.3 mm gasket lowers the ratio more than the 1.0 mm one.

Preparation and fitting

Fasteners Engines Tightening torque
Original cylinder head bolts
0204A3
EW10J4S, EW10J4, EW10D, RFN not published by the manufacturer

Before refitting, check head and block flatness with a straightedge and have them resurfaced if needed. The Athena gasket is supplied with its coating: do not add any sealant to it.

Technical guide

The construction offered

Athena MLS cylinder head gasket Athena MLS
An assembly of two to five AISI 301 stainless steel sheets, laser cut, pressed and then riveted. Around each cylinder, a folded sheet, the Gas Stopper, transfers the clamping force onto the combustion chamber; raised reliefs separate the water and oil circuits. Two coatings cover the faces: one withstands high temperatures and fills small surface flaws on the block and head, the other, in silicone, prevents sticking at removal. It is Athena's all-steel answer, from a prepared naturally aspirated engine to moderate forced induction.

Choosing bore and thickness

Gasket bore. The Athena MLS is offered in 86.0 mm only (338265R and 338266R).

Thickness. Peugeot and Citroën do not give the thickness of the original gasket. A thicker gasket enlarges the combustion chamber and lowers the compression ratio; a thinner one reduces it and raises the ratio.

Your goal Thickness to choose
Keep the original compression ratio Original thickness not published by the manufacturers: measure the removed gasket and compare it with the two thicknesses offered, 1.0 and 1.3 mm
Skimmed cylinder head, make up the lost height Between 1.0 and 1.3 mm, take the thickness closest to that of the removed gasket, plus whatever was taken off when resurfacing
Forced induction build, lower the ratio 1.3 mm to lower the ratio the most, when the original gasket measured at removal is thinner
Naturally aspirated build, raise the ratio 1.0 mm to raise the ratio the most, when the original gasket measured at removal is thicker

As the original thickness is not published, use a dial gauge to measure how far the pistons stand proud of the block face, especially if you are aiming at 1.0 mm: that figure fixes the distance left between piston and head.

The brand

Athena Athena S.p.A. is an Italian company specialising in gaskets and engine parts. It has its head office and large factory in Alonte, in the Veneto, with other sites in Spain, the United States, Brazil and India. Car makers use its multi-layer gaskets as original equipment, and its competition range is designed and made in Italy.

Advantages over the original gasket

Criterion Original gaskets 0209.Z3, 0209.EP, 0209.EQ, 0209.N6 Reinforced gaskets
Construction Construction not stated by the manufacturer Multi-layer stainless steel (MLS)
Gasket bore not published 86.0 mm
Thicknesses available thickness not published by the manufacturers 1.0 or 1.3 mm, two values
Compression ratio adjustment None Through the thickness chosen
Resistance to overpressure Limited to standard output Designed for forced induction

When a reinforced gasket becomes necessary

  • Adding forced induction, or raising boost on an already turbocharged engine
  • Cylinder rebored beyond what the bore of the original gasket, which Peugeot and Citroën do not publish covers
  • Looking for a compression ratio different from standard, higher or lower
  • Engine that has already lost its gasket, or is consuming coolant
  • Competition use, where the gasket goes through repeated temperature rises

Vehicle compatibility

Brand Model Engine code Power Years
Peugeot 605 (6B) 2.0 16V XU10J4R 132 and 135 hp 1994-1999
Peugeot 406 (8B) 2.0 16V EW10J4, XU10J4R 132, 135 and 136 hp 1995-2004
Peugeot 406 Break (8E/F) 2.0 16V EW10J4, XU10J4R 132, 135 and 136 hp 1996-2004
Peugeot 406 Coupé (8C) 2.0 16V EW10J4, XU10J4R 132, 135 and 136 hp 1997-2004
Peugeot 306 Berline à hayon (7A, 7C, N3, N5) 2.0 16V XU10J4R 132, 135 and 136 hp 1997-2001
Peugeot 306 (7B, N3, N5) 2.0 XU10J4R 132 and 135 hp 1997-2001
Peugeot 306 Break (7E, N3, N5) 2.0 XU10J4R 132 hp 1997-2002
Peugeot 306 Décapotable (7D, N3, N5) 2.0 16V XU10J4R 132 and 135 hp 1997-2002
Peugeot 806 (221) 2.0 16V EW10J4, XU10J4R 132 and 136 hp 1998-2002
Peugeot 206 Berline à hayon (2A/C) 2.0 S16 EW10J4 135 and 136 hp 1999-2007
Peugeot 206 CC (2D) 2.0 S16 EW10J4 136 hp 2000-2007
Peugeot Expert (224_) 2.0 EW10J4 136 hp 2000-2006
Peugeot 307 (3A/C) 2.0 16V EW10J4, EW10J4S 136 and 177 hp 2000-2007
Peugeot 406 (8B) 2.0 16V HPi EW10D 140 hp 2001-2004
Peugeot 406 Break (8E/F) 2.0 16V HPi EW10D 140 hp 2001-2004
Peugeot 307 SW (3H) 2.0 16V EW10J4 136 hp 2002-2005
Peugeot 807 (EB_) 2.0 EW10J4 136 hp 2002-
Peugeot 206 SW (2E/K) 2.0 16V EW10J4 136 hp 2002-2007
Peugeot 206 Berline à hayon (2A/C) 2.0 RC EW10J4S 177 and 180 hp 2003-2007
Peugeot 307 CC (3B) 2.0 16V EW10J4, EW10J4S 136, 177 and 180 hp 2003-2009
Peugeot Expert Fourgon (222) 2.0 EW10J4 136 hp 2002-2006
Peugeot 407 (6D_) 2.0 EW10J4 136 hp 2004-2005
Peugeot 607 (9D, 9U) 2.0 EW10J4 136 hp 2000-2005
Peugeot 307 Break (3E) 2.0 EW10J4 136 hp 2002-2005
Peugeot 407 SW (6E_, 6D_) 2.0 EW10J4 136 hp 2004-2005
Peugeot 306 Break (7E, N3, N5) 2.0 16V XU10J4R 135 hp 1997-2002
Peugeot 307 (3A/C) 2.0 EW10J4 143 hp 2008-2011
Peugeot 806 Van (AF_) 2.0 EW10J4, XU10J4R 132 and 136 hp 1998-2003
Citroën XM (Y4) 2.0 i 16V XU10J4R 132 hp 1994-2000
Citroën XM Break (Y4) 2.0 i 16V XU10J4R 132 hp 1994-2000
Citroën Xantia (X1_, X2_) 2.0 i 16V XU10J4R 132 hp 1995-2003
Citroën Xantia Break (X1_, X2_) 2.0 i 16V XU10J4R 132 hp 1995-2003
Citroën Evasion Monospace (22, U6) 2.0 16V EW10J4, XU10J4R 132 and 136 hp 1998-2002
Citroën Xsara (N1) 2.0 16V EW10J4, XU10J4R 132 and 136 hp 1998-2005
Citroën Xsara Break (N2) 2.0 16V EW10J4, XU10J4R 132 and 136 hp 1998-2005
Citroën Jumpy I (U6U_) 2.0 EW10J4 136 hp 2000-2006
Citroën Jumpy I (U6U_) 2.0 i 16V EW10J4 138 hp 2000-2006
Citroën Jumpy I Fourgon (BS_, BT_, BY_, BZ_) 2.0 i 16V EW10J4 138 hp 2000-2006
Citroën Xsara Coupé (N0) 2.0 16V EW10J4 136 hp 2000-2005
Citroën C5 I (DC_) 2.0 16V EW10J4 136 hp 2001-2004
Citroën C5 I (DC_) 2.0 16V HPi EW10D 140 hp 2001-2004
Citroën C5 I Break (DE_) 2.0 16V EW10J4 136 hp 2001-2004
Citroën C5 I Break (DE_) 2.0 16V HPi EW10D 140 hp 2001-2004
Citroën C8 (EA_, EB_) 2.0 EW10J4 136 hp 2002-
Citroën Xsara Picasso (N68) 2.0 16V EW10J4 136 and 138 hp 1999-2012
Citroën C4 I (LC_) 2.0 16V EW10J4, EW10J4S 136, 138 and 177 hp 2004-2014
Citroën C4 Coupé (LA_) 2.0 16V EW10J4, EW10J4S 136 and 177 hp 2004-2010
Citroën Jumpy I Camion plate-forme/Châssis (BU_, BV_, BW_, BX_) 2.0 EW10J4 136 hp 2003-2006
Citroën Xsara Coupé (N0) 2.0 XU10J4R 132 hp 1998-2000
Citroën Xsara Picasso (N68) 2.0 EW10J4 120 hp 2004-2004
Citroën XM (Y3) 2.0 i XU10J4R 135 hp 1989-1994
Citroën C4 Picasso I Monospace (UD_) 2.0 i 16V EW10J4 143 hp 2008-2013
Citroën Jumpy I Fourgon (BS_, BT_, BY_, BZ_) 2.0 EW10J4 136 hp 2000-2006
Citroën Xantia (X1_, X2_) 2.0 16V XU10J4R 126 and 135 hp 1995-2001
Citroën C4 I Berline tricorps 2.0 16V EW10J4 138 hp 2007-2014
Citroën C8 Van (EA_, EB_) 2.0 EW10J4 136 hp 2003-2004
Citroën Evasion Van (U6_, AF_) 2.0 XU10J4R 132 hp 1998-2000

OEM part number: 0209.Z3, 0209.EP, 0209.EQ and 0209.N6.

Important: these two part numbers are reserved for the engines EW10J4, EW10J4S, EW10D and XU10J4R: check your car's engine code before ordering.

Why switch to a reinforced gasket?

When the original gasket reaches its limits, the reinforced gasket takes over: under increased combustion pressure, it keeps its thickness and shape without being crushed.

Turbo, supercharger or raised compression ratio: as power climbs, the head gasket becomes the weak point of the top end. The reinforced gasket rules out the leak, and the head removal it forces, far costlier than the gasket itself.

16 other products in the same category

Viewed products

Loading...