Skip to content
  • On order
Forged connecting rods Toyota - 2.0L 16V - 3S-GTE / 3S-GE (Celica GT-Four / MR2) for forged pistons Forged connecting rods Toyota - 2.0L 16V - 3S-GTE / 3S-GE (Celica GT-Four / MR2) for forged pistons Forged connecting rods Toyota - 2.0L 16V - 3S-GTE / 3S-GE (Celica GT-Four / MR2) for forged pistons Forged connecting rods Toyota - 2.0L 16V - 3S-GTE / 3S-GE (Celica GT-Four / MR2) for forged pistons Forged connecting rods Toyota - 2.0L 16V - 3S-GTE / 3S-GE (Celica GT-Four / MR2) for forged pistons Forged connecting rods Toyota - 2.0L 16V - 3S-GTE / 3S-GE (Celica GT-Four / MR2) for forged pistons

Forged connecting rods Toyota - 2.0L 16V - 3S-GTE / 3S-GE (Celica GT-Four / MR2) for forged pistons

€573.12 (tax incl.)
€716.40 (tax incl.) -20%

Set of 4 forged 4340-steel connecting rods for the Toyota 3S-GTE / 3S-GE 2.0 16V.

  • Brands : Boostline, Manley, ZRP
  • Compatibility : Celica GT-Four (ST165-205), MR2 (SW20), Caldina, Altezza
  • Engine codes : 3S-GTE, 3S-GE
  • Bolts included : ARP 2000, L19 or CA625+
14008-4
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

The Toyota 3S engine

The 3S belongs to Toyota's S family: a 2.0-litre (1998 cc) inline-four with twin overhead camshafts and 16 valves, whose strictly equal 86 mm bore and stroke give a square, rev-friendly architecture. It comes as the naturally aspirated 3S-GE, whose final BEAMS dual VVT-i generation (Altezza RS200) reaches 200 to 210 hp, and as the turbocharged 3S-GTE. Built from 1986 to 2007, it powered a wide range of Toyota models, from the Celica and MR2 to the Caldina, Carina and RAV4.

The turbo 3S-GTE owes its reputation to the Celica GT-Four, whose rally versions carried Toyota to the top of the World Rally Championship (WRC) in the early 1990s. That competition pedigree made it a favourite of the tuning scene, able to deliver strong power once the turbo and engine management are reworked. But as soon as boost pressure and engine speed climb well past factory values, the stock rods become the weak point of the reciprocating assembly. Replacing them with forged rods is the decisive step to reliably secure a hard-pushed 3S-GTE, as well as a 3S-GE built for high rpm.

The forged connecting rods

Our forged 3S rods are machined from wrought 4340 steel, the reference alloy in motorsport. They suit every discipline: circuit, drift, drag, rally, time attack and hillclimb, and support a high-revving naturally aspirated 3S-GE as readily as a heavily boosted 3S-GTE. Depending on the target (Stage 1 reliability, Stage 2 moderate boost, Stage 3 high power and beyond), they lock in the power increase without ever cutting corners on reliability. Supplied as a weight-matched set of 4, they keep the 3S's 22 mm piston pin and 138 mm center-to-center length.

Compared with a cost-driven sintered factory rod, a forged 4340 rod delivers about +19% yield strength, +8% tensile strength and +19 to +37% fatigue endurance. That mechanical reserve lets a 3S pushed in rpm or boost absorb cylinder-pressure peaks and inertia loads without breakage. The entire range is made from this forged 4340 steel, proven on the most demanding builds.

Technical specifications of the 3S forged rods (22 mm pin, 138 mm center-to-center)

ReferenceBrandProfileRod boltsØ pin (mm)
OEM 22 mm
Small-end width (mm)Ø big end (mm)
OEM n.p.
Big-end width (mm)Center-to-center (mm)
OEM 138 mm
Weight (g)
TY5433-866 Boostline I-3P ARP 2000-3/8"-41mm 22 26,77 51,01 26,77 138 659
TY5433-866+ Boostline I-3P ARP CA625+-3/8"-41mm 22 26,77 51,01 26,77 138 659
14008-4 Manley H ARP 2000-3/8"-38mm 22 51 26,8 137,87 565
R-TOY-005-I ZRP I-HD ARP 2000-3/8"-38mm 22 51 26,7 138 588
R-TOY-005-I-L19 ZRP I-HD ARP L19-3/8"-38mm 22 51 26,7 138 588

Tightening torque and stretch

Torque and stretch depend on the bolt reference and the rod manufacturer; refer to the datasheet supplied with the kit. Checking stretch with a gauge remains the most reliable and repeatable method.

ReferenceBrandRod boltsTorqueRecommended stretch
TY5433-866 Boostline ARP 2000-3/8"-41mm 81 N·m 0,142 à 0,152 mm
TY5433-866+ Boostline ARP CA625+-3/8"-41mm 88 N·m 0,152 à 0,163 mm
14008-4 Manley ARP 2000-3/8"-38mm 81,3 N·m 0,147 à 0,157 mm
R-TOY-005-I ZRP ARP 2000-3/8"-38mm 61 N·m 0,140 à 0,152 mm
R-TOY-005-I-L19 ZRP ARP L19-3/8"-38mm 67,8 N·m 0,152 à 0,165 mm

Technical guide

Forged 4340 steel: what is it?

4340 is a low-alloy steel with nickel, chromium and molybdenum. Forging aligns the metal fibres in the direction of load, removes internal porosity and delivers far greater mechanical strength than a factory sintered or cast rod. The result is a tensile strength of around 930 to 1080 MPa together with excellent fatigue endurance, essential as soon as the engine gains torque, power or revs. This is the material used across our entire 3S range.

Rod profiles

The 3S range comes in three profiles.

H-Beam H profile. With its “H” section, made of two wide flat flanks joined by a central web, the rod has a massive, even body from end to end. On a turbo engine such as the 3S-GTE, this profile proves robust and versatile, at ease in mainstream builds: from securing the bottom end when switching to forged pistons up to a measured rise in boost pressure.
I-Beam I-HD profile. A “Heavy Duty” variant of the I profile, it retains its architecture while gaining a thicker, reinforced beam, designed to resist markedly higher stresses. It is aimed at extreme loads, on turbocharged, supercharged or nitrous engines pushed to high power and high boost pressure.
I-3P I-3P profile (Boostline). This patented three-pocket profile, drawn up by Boostline, combines the strengths of H and I sections to deliver maximum strength with reduced rotating mass. The manufacturer reserves it for forced-induction engines, up to the highest boost pressures, whether fitted with a turbo, a supercharger or nitrous oxide.

How to choose your rod bolts? ARP

ARP 2000 ARP 2000: the all-round benchmark alloy, with a tensile strength of about 220,000 psi (1,517 MPa). Offered here in 3/8" diameter, it covers the vast majority of 3S builds, up to about 200 hp per cylinder and speeds reaching 8,500 rpm. It is the default choice to make a sporting 3S reliable.
ARP L19 ARP L19: a very-high-strength, stiffer steel intended for heavily stressed 3S engines, up to about 250 hp per cylinder and rpm up to 10,000. In 3/8" diameter it clearly widens the safety margin on hard builds (note: corrosion-sensitive, it requires careful storage).
ARP CA625+ ARP CA625+: the strongest bolts in the range, a premium corrosion-resistant alloy reserved for the most extreme 3S engines in load and rpm, beyond the previous thresholds (beyond 250 hp per cylinder). In 3/8" diameter it provides the maximum safety margin, with no storage constraint, and withstands the highest engine speeds (beyond 10,000 rpm in extreme use).

Measuring bolt stretch

On a forged rod, the exact bolt preload is checked by its stretch, measured with a dial gauge (stretch gauge), rather than by torque alone: lubrication and run-in distort the torque reading. Always refer to the stretch values given by the bolt manufacturer.

View the ARP stretch gauge

The brands offered

This 3S range brings together three race forged-rod manufacturers.

Boostline Boostline designs its three-pocket I-3P profile through structural analysis, for a top-level stiffness-to-weight ratio, with ARP 2000 or CA625+.
Manley Manley, an American benchmark, offers its H profile in 4340 steel. Each reference ships as a complete set of 4, with its dedicated ARP bolts.
ZRP ZRP offers its I-HD profile, available with ARP 2000 or L19 bolts.

Glossary

1) Small end
2) Small-end diameter
3) Rod beam
4) Rod bolt
5) Big end
6) Rod nut / bolt
7) Rod cap
8) Big-end diameter
9) Center-to-center

Vehicle compatibility for the Toyota 3S engine

These forged rods fit the Toyota models powered by the 2.0 L 16v 3S inline-four (138 mm center-to-center, 22 mm pin), in its naturally aspirated 3S-GE and turbocharged 3S-GTE forms:

BrandModel (chassis)Engine codePowerYears
Toyota Celica GT-Four (ST165) 3S-GTE 185 ch 1988–1989
Toyota Celica GT-Four (ST185) 3S-GTE 203–224 ch 1989–1993
Toyota Celica GT-Four (ST205) 3S-GTE 242–256 ch 1994–1999
Toyota MR2 Turbo (SW20) 3S-GTE 225–245 ch 1989–1999
Toyota Caldina GT-T (ST215) 3S-GTE 190–261 ch 1997–2001
Toyota Caldina GT-Four (ST246) 3S-GTE 260 ch 2002–2007
Toyota Altezza RS200 (SXE10) 3S-GE 200–210 ch 1998–2005
Toyota Celica (ST182 / ST183 / ST202) 3S-GE 156–200 ch 1989–1999
Toyota MR2 (SW20) 3S-GE 156–200 ch 1989–2000
Toyota Carina E / ED (ST191 / ST202 / ST205) 3S-GE 158–180 ch 1989–1998
Toyota Corona / Curren (ST171 / ST191 / ST206) 3S-GE 160–180 ch 1987–1998
Toyota Camry / Vista (SV21 / SV32 / SV33) 3S-GE 140–175 ch 1986–1994
Toyota RAV4 (SXA10 / SXA11) 3S-GE 165–179 ch 1994–1999
Toyota Caldina (ST195) 3S-GE 175 ch 1994–1997

Why is it the most economical solution?

On a tuned 3S, a stock rod that lets go usually takes the block, crankshaft and pistons with it. Investing in a forged rod set from the outset costs far less than an engine failure followed by a full rebuild. You permanently strengthen the bottom end, preserve the value of your build and drive with peace of mind, in intensive use as much as day to day.

15 other products in the same category

Viewed products

Loading...