Skip to content
  • In stock
Reinforced inlet valves PEUGEOT CITROËN 306 S16 Xsara VTS ZX XU10J4RS Reinforced inlet valves PEUGEOT CITROËN 306 S16 Xsara VTS ZX XU10J4RS

Reinforced inlet valves PEUGEOT CITROËN 306 S16 Xsara VTS ZX XU10J4RS

€249.89 (tax incl.)
€312.36 (tax incl.) -20%

Set of 8 reinforced inlet valves for PEUGEOT 306 S16 and CITROËN Xsara VTS, ZX XU10J4RS.

  • Brands: SUPERTECH, CATCAMS
  • Engine: XU10J4RS 2.0 16V (306 S16 and 306 2.0, 1996 to 2001)
  • Dimensions: head 34.1 mm or 34 mm, stem 5.97 mm or 6 mm, length 106.5 mm
  • Material: black nitride stainless steel (SUPERTECH)
PEIVN-28692-8
3 in stock in Europe (72h lead time)
Pay in installments

PEUGEOT and CITROËN engines covered

The XU10J4RS is PSA's 2.0 litre (1,998 cc) four-cylinder with 16 valves, bore and stroke both 86 mm. At Peugeot it powers the 306 S16 and 306 2.0 from 1996 to 2001, with 163 to 169 hp. At Citroën it is fitted to the Xsara (N0) 2.0 16V, VTS and 2.0 i 16V from 1998 to 2005, and to the ZX (N2) 2.0 16V from 1996 to 1997, with 163 to 167 hp.

Its cylinder head carries 8 inlet valves, two per cylinder, with a 6 mm stem and an overall length of 106.5 mm. A sharper camshaft, a higher rev limit or a track build makes them work far harder than in standard use.

SUPERTECH and CATCAMS reinforced inlet valves

On a high-revving XU10J4RS, the inlet valve opens the cylinder's path to the fresh charge and shuts it once more, completing dozens of full cycles per second. The head raps the seat face each time it returns, while the stem keeps sliding through the guide without end. Its operating temperature ranges from 400 to 550 °C, a slice in which factory chrome-silicon has little left to give: 500 MPa at 500 °C, then 250 MPa near 600 °C, just after, which cuts its strength by 50 %. A taller cam, stiffer springs, a later red line or a turbo add yet more knocks, friction and heat to absorb.

SUPERTECH's PEIVN-28692-8 is made in uprated stainless steel and then black nitrided: its surface hardens and stem friction in the guide drops. Right below the head the stem is undercut, which lightens the valve and lets gases flow better; the head's rear face is also reshaped to steer air more gently towards the seat. Both machining operations cut the moving mass and refine flow at the cylinder entry, without changing the valve's fitting dimensions.

The SUPERTECH stays at standard size, with a 34.1 mm head and 5.97 mm stem; the CATCAMS 9249001M has a 34 mm head on a 6 mm stem. Both are 106.5 mm long, the same as the production valve, so they fit with no head modification.

Inlet valve technical specification

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
PEIVN-28692-8 SUPERTECH Standard 34.1 mm 5.97 mm 106.5 mm Black nitride stainless steel
9249001M*8 CATCAMS 34 mm 6 mm 106.5 mm

Fitting details

PartoriginalReinforced
Collets
Valve stem seals
Valve guide

Before assembly, check that the collets match the groove of the chosen valves.

Technical guide

The brands offered

SUPERTECH A Californian company from San Jose, SUPERTECH Performance has spent more than thirty years making every part of a racing valvetrain. Each batch goes through ultrasound, then radiography and laser checks, before being handed to engine builders, at the drag strip as on circuits.
CATCAMS CATCAMS designs and machines racing camshafts in Europe, and offers alongside them the valvetrain parts that go with them: valves, springs and retainers, for engines built for rallying as well as circuit racing or hillclimbs.

How to choose

The groove, cut at the end of the stem, receives the collets holding the upper retainer. What separates the two sets is their sizes and finish:

CriterionOption 1Option 2
Brand and finish SUPERTECH
34.1 mm head, 5.97 mm stem, black nitride stainless, stem slimmed under the head.
CATCAMS
34 mm head, 6 mm stem, 106.5 mm overall length.

When reinforced valves become necessary

  • Sharper valve timing, stiffer valve springs
  • Rev cut raised above stock
  • Engine boosted by turbo or supercharger
  • Head rebuilt for rally, hillclimb or circuit
  • Stock valves worn or head seats already recut

Compatible vehicles

ModelEngine codePowerYears
CITROËN Xsara (N0) 2.0 16V / 2.0 VTS / 2.0 i 16V XU10J4RS 163-167 hp 1998-2005
CITROËN ZX (N2) 2.0 / 2.0 i 16V XU10J4RS 163-166 hp 1996-1997
PEUGEOT 306 (7A, 7C, N3, N5) 2.0 S16 XU10J4RS 163 hp 1996-2001
PEUGEOT 306 (7A, 7C, N3, N5) 2.0 XU10J4RS 167-169 hp 1997-2000
Important: one set of 8 valves equips a complete engine.

Related products

For a refreshed 306 S16 cylinder head, think of the exhaust valves too, to replace in the same job. The reinforced ones are on this page:

PEUGEOT 306 S16 XU10J4RS exhaust valves →

11 other products in the same category

Viewed products

Loading...