Skip to content
  • On order
Reinforced exhaust valves Peugeot 306 S16 Citroën Xsara ZX XU10J4RS Reinforced exhaust valves Peugeot 306 S16 Citroën Xsara ZX XU10J4RS

Reinforced exhaust valves Peugeot 306 S16 Citroën Xsara ZX XU10J4RS

€258.05 (tax incl.)
€322.56 (tax incl.) -20%

Set of 8 reinforced exhaust valves for the Peugeot 306 S16, Citroën Xsara VTS and ZX 16V XU10J4RS.

  • Brands: CATCAMS, SUPERTECH
  • Engine: XU10J4RS 2.0 16V (306 S16 1996 to 2001, Xsara 1998 to 2005, ZX 1996 to 1997)
  • Dimensions: 30.8 mm head, 6 mm or 5.96 mm stem
  • Material: black nitrided stainless steel (SUPERTECH)
9249002M*8
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

Peugeot and Citroën engines covered

The Peugeot 306 S16 (types 7A, 7C, N3 and N5), built from 1996 to 2001, is powered by the XU10J4RS, a 16-valve 2.0 four-cylinder.

At Citroën, the XU10J4RS 2.0 16V powers the Xsara (N0) in 2.0 16V, VTS and 2.0 i 16V form from 1998 to 2005, and the ZX (N2) 2.0 and 2.0 i 16V in 1996 and 1997.

It has 8 exhaust valves. The CATCAMS 9249002M and SUPERTECH PEEVN-28693 valves both have a 30.8 mm head in standard size; the stem measures 6 mm on the CATCAMS and 5.96 mm on the SUPERTECH, the overall length 105.5 and 105.3 mm.

SUPERTECH reinforced exhaust valves

Each time it opens, the exhaust valve lets through gases that are still scorching: no other part of the XU10J4RS cylinder head runs as hot. The head metal stays between 760 and 870 °C on this unboosted engine and exceeds 1,000 °C as soon as it is boosted. It cools mainly by contact, about 75 % via the seat and close to 20 % via the guide. An EV8-family steel, the yardstick for the original, drops from 550 MPa at 600 °C to 300 MPa at 800 °C. Add torque, revs or pressure, and the head heats up, fatigues, warps and then loses its seal.

The reinforced versions rely on material and surface treatment. On the SUPERTECH PEEVN-28693-8, the stainless steel receives a black nitride treatment: this hard, smooth surface layer reduces friction against the guide and slows stem wear. The CATCAMS 9249002M reproduces the dimensions of the original part, with a 30.8 mm head and a 6 mm stem, for a rebuild true to factory spec. Two approaches are thus offered on this engine: the SUPERTECH nitrided finish, built to last under heavy loading, and the CATCAMS valve at factory dimensions, supplied as a set of 8 to fit out the whole head.

Both sets stay at the original 30.8 mm size: no enlarged head is offered for this engine. The exhaust seats therefore only need regrinding during the rebuild, with no change of diameter, and flow remains that of the standard cylinder head.

Exhaust valve technical specifications

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
9249002M*8 CATCAMS Standard 30.8 mm 6 mm 105.5 mm
PEEVN-28693-8 SUPERTECH Standard 30.8 mm 5.96 mm 105.3 mm Black nitrided stainless steel

Valve fitting

PartPeugeot / Citroën originalReinforced
Collets
Valve stem seals
Valve guide

Before reassembly, check that the collets suit the lock groove of the chosen valves.

Both sets are standard size and fit exhaust seats cut at 30.8 mm.

The stem differs from one brand to the other (6 mm CATCAMS, 5.96 mm SUPERTECH): check the clearance in the existing guides.

Technical guide

Our brands

SUPERTECH SUPERTECH, founded in Northern California, has spent three decades designing racing valves and springs, along with guides and retainers in titanium. Whether stainless, titanium or Inconel, its valves are drawn engine by engine and proven in competition by recognised tuners.
CATCAMS CATCAMS, a Belgian valvetrain specialist, calculates its own lift laws and grinds its camshafts on numerical machines. Its range also covers tappets, shims, valve springs and retainers; its camshafts have proven themselves in the BTCC as well as at the Le Mans 24 Hours.

How to choose

Wedged between the stem and the retainer, the collets lock the valve firmly in position. As both sets share exactly the same 30.8 mm head, the decision comes down to the brand, the finish and the stem dimensions.

CriterionOption 1Option 2
Brand SUPERTECH
PEEVN-28693-8, stainless steel given a black nitride treatment, 30.8 mm head like the original. The hardened layer protects the stem from wear in the guide: a good pick for an unboosted XU10J4RS often revved high, whether used daily or for circuit sessions, with nothing else to modify and no extra part.
CATCAMS
9249002M, supplied as a set of 8, which keeps the original 30.8 mm head. The Belgian valvetrain specialist offers it for a rebuild faithful to the factory dimensions of the XU10J4RS, fitted on exhaust seats that are simply reground.
Stem and length SUPERTECH, 5.96 mm
5.96 mm stem and 105.3 mm length. The stem is slightly thinner than on the CATCAMS: check the clearance in the existing guides before reassembly, and replace them if they are worn.
CATCAMS, 6 mm
6 mm stem and 105.5 mm length, i.e. 0.2 mm more than the SUPERTECH. Guide clearance is checked in the same way, and make sure the collets suit the groove of this valve before reassembly.

When reinforced valves become necessary

  • More aggressive camshaft profile, stiffer valve springs
  • Red line moved higher
  • Supercharger or turbo fitted to the XU10J4RS
  • Regular outings on circuits, in autotests or in hill climbs
  • Restoring a cylinder head whose exhaust valves are worn or marked

Vehicle compatibility

ModelEngine codePowerYears
Peugeot 306 (7A, 7C, N3, N5) 2.0 / 2.0 S16 XU10J4RS 167-169 hp 1996-2001
Citroën Xsara (N0) 2.0 16V / 2.0 VTS / 2.0 i 16V XU10J4RS 163-167 hp 1998-2005
Citroën ZX (N2) 2.0 / 2.0 i 16V XU10J4RS 163-166 hp 1996-1997

OEM part number (exhaust valve):

Important: one set of 8 equips a complete engine.

Don't forget the inlet valves

Take advantage of the 306 S16, Xsara VTS or ZX 16V cylinder head being off the engine to replace the inlet valves and the valve stem seals in one single job:

See the XU10J4RS inlet valves

11 other products in the same category

Viewed products

Loading...