- On order
Reinforced exhaust valves Peugeot 306 S16 Citroën Xsara ZX XU10J4RS
Set of 8 reinforced exhaust valves for the Peugeot 306 S16, Citroën Xsara VTS and ZX 16V XU10J4RS.
- Brands: CATCAMS, SUPERTECH
- Engine: XU10J4RS 2.0 16V (306 S16 1996 to 2001, Xsara 1998 to 2005, ZX 1996 to 1997)
- Dimensions: 30.8 mm head, 6 mm or 5.96 mm stem
- Material: black nitrided stainless steel (SUPERTECH)
Peugeot and Citroën engines covered
The Peugeot 306 S16 (types 7A, 7C, N3 and N5), built from 1996 to 2001, is powered by the XU10J4RS, a 16-valve 2.0 four-cylinder.
At Citroën, the XU10J4RS 2.0 16V powers the Xsara (N0) in 2.0 16V, VTS and 2.0 i 16V form from 1998 to 2005, and the ZX (N2) 2.0 and 2.0 i 16V in 1996 and 1997.
It has 8 exhaust valves. The CATCAMS 9249002M and SUPERTECH PEEVN-28693 valves both have a 30.8 mm head in standard size; the stem measures 6 mm on the CATCAMS and 5.96 mm on the SUPERTECH, the overall length 105.5 and 105.3 mm.
SUPERTECH reinforced exhaust valves
Each time it opens, the exhaust valve lets through gases that are still scorching: no other part of the XU10J4RS cylinder head runs as hot. The head metal stays between 760 and 870 °C on this unboosted engine and exceeds 1,000 °C as soon as it is boosted. It cools mainly by contact, about 75 % via the seat and close to 20 % via the guide. An EV8-family steel, the yardstick for the original, drops from 550 MPa at 600 °C to 300 MPa at 800 °C. Add torque, revs or pressure, and the head heats up, fatigues, warps and then loses its seal.
The reinforced versions rely on material and surface treatment. On the SUPERTECH PEEVN-28693-8, the stainless steel receives a black nitride treatment: this hard, smooth surface layer reduces friction against the guide and slows stem wear. The CATCAMS 9249002M reproduces the dimensions of the original part, with a 30.8 mm head and a 6 mm stem, for a rebuild true to factory spec. Two approaches are thus offered on this engine: the SUPERTECH nitrided finish, built to last under heavy loading, and the CATCAMS valve at factory dimensions, supplied as a set of 8 to fit out the whole head.
Both sets stay at the original 30.8 mm size: no enlarged head is offered for this engine. The exhaust seats therefore only need regrinding during the rebuild, with no change of diameter, and flow remains that of the standard cylinder head.
Exhaust valve technical specifications
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| 9249002M*8 | CATCAMS | Standard | 30.8 mm | 6 mm | 105.5 mm | ||
| PEEVN-28693-8 | SUPERTECH | Standard | 30.8 mm | 5.96 mm | 105.3 mm | Black nitrided stainless steel |
Valve fitting
| Part | Peugeot / Citroën original | Reinforced |
|---|---|---|
| Collets | ||
| Valve stem seals | ||
| Valve guide |
Before reassembly, check that the collets suit the lock groove of the chosen valves.
Both sets are standard size and fit exhaust seats cut at 30.8 mm.
The stem differs from one brand to the other (6 mm CATCAMS, 5.96 mm SUPERTECH): check the clearance in the existing guides.
Technical guide
Our brands
| SUPERTECH, founded in Northern California, has spent three decades designing racing valves and springs, along with guides and retainers in titanium. Whether stainless, titanium or Inconel, its valves are drawn engine by engine and proven in competition by recognised tuners. | |
| CATCAMS, a Belgian valvetrain specialist, calculates its own lift laws and grinds its camshafts on numerical machines. Its range also covers tappets, shims, valve springs and retainers; its camshafts have proven themselves in the BTCC as well as at the Le Mans 24 Hours. |
How to choose
Wedged between the stem and the retainer, the collets lock the valve firmly in position. As both sets share exactly the same 30.8 mm head, the decision comes down to the brand, the finish and the stem dimensions.
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Brand | SUPERTECH PEEVN-28693-8, stainless steel given a black nitride treatment, 30.8 mm head like the original. The hardened layer protects the stem from wear in the guide: a good pick for an unboosted XU10J4RS often revved high, whether used daily or for circuit sessions, with nothing else to modify and no extra part. |
CATCAMS 9249002M, supplied as a set of 8, which keeps the original 30.8 mm head. The Belgian valvetrain specialist offers it for a rebuild faithful to the factory dimensions of the XU10J4RS, fitted on exhaust seats that are simply reground. |
| Stem and length | SUPERTECH, 5.96 mm 5.96 mm stem and 105.3 mm length. The stem is slightly thinner than on the CATCAMS: check the clearance in the existing guides before reassembly, and replace them if they are worn. |
CATCAMS, 6 mm 6 mm stem and 105.5 mm length, i.e. 0.2 mm more than the SUPERTECH. Guide clearance is checked in the same way, and make sure the collets suit the groove of this valve before reassembly. |
When reinforced valves become necessary
- More aggressive camshaft profile, stiffer valve springs
- Red line moved higher
- Supercharger or turbo fitted to the XU10J4RS
- Regular outings on circuits, in autotests or in hill climbs
- Restoring a cylinder head whose exhaust valves are worn or marked
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| Peugeot 306 (7A, 7C, N3, N5) 2.0 / 2.0 S16 | XU10J4RS | 167-169 hp | 1996-2001 |
| Citroën Xsara (N0) 2.0 16V / 2.0 VTS / 2.0 i 16V | XU10J4RS | 163-167 hp | 1998-2005 |
| Citroën ZX (N2) 2.0 / 2.0 i 16V | XU10J4RS | 163-166 hp | 1996-1997 |
OEM part number (exhaust valve):
Don't forget the inlet valves
Take advantage of the 306 S16, Xsara VTS or ZX 16V cylinder head being off the engine to replace the inlet valves and the valve stem seals in one single job:
| See the XU10J4RS inlet valves |
-
Brand
-
Reference9249002M*8