Skip to content
  • On order
Reinforced exhaust valves Nissan Skyline GT-R RB26DETT Reinforced exhaust valves Nissan Skyline GT-R RB26DETT

Reinforced exhaust valves Nissan Skyline GT-R RB26DETT

€542.82 (tax incl.)
€678.53 (tax incl.) -20%

Set of 12 reinforced exhaust valves for the Nissan Skyline GT-R RB26DETT.

  • Brands: SUPERTECH, FERREA
  • Engine: RB26DETT
  • Dimensions: 30.2 mm head (standard) or 31.2 mm, 6.9 mm stem
  • Material: Inconel, sodium-filled Inconel or Super Alloy
F2131P*12
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

Nissan engines covered

The RB26DETT is the 2.6 litre twin-turbo, 24-valve inline six of the Skyline GT-R R32, R33 and R34, also used in the Stagea 260RS.

Its cylinder head carries 12 exhaust valves; the SUPERTECH valves have a 6.94 mm stem. The two turbos at the manifold outlet and the high boost sought in tuning put them under heavy strain.

SUPERTECH and FERREA reinforced exhaust valves

On the RB26DETT, the twelve exhaust valves deliver the combustion gases to the two turbos fitted at the manifold outlet, and nowhere else in the cylinder head is the heat as intense. Measured in the metal, each head goes well past 1,000 °C when the turbos are on boost, whereas an unblown engine would keep it near 760 to 870 °C. It relies on its seat to remove about 75 % of that heat and on the guide for roughly 20 %. An EV8 valve steel, our benchmark, offers 550 MPa at 600 °C but only keeps 300 at 800 °C. As soon as turbo pressure climbs, the head suffers, gives in to fatigue, warps and no longer sits tight on its seat.

Reinforced valves trust nickel alloys. SUPERTECH uses Inconel, which holds 860 MPa at 732 °C and 554 MPa at 816 °C, nearly 85 % better than an EV8 steel around 800 °C, in a solid version, in a version whose hollowed stem holds sodium to relieve the head, and in a version with an extended stem tip. FERREA supplies its Competition Plus valves in Super Alloy, a nickel-bearing alloy aimed at boosted engines, for which the maker claims 20 % extra hot strength and 25 % greater seat longevity.

In +1 mm oversize, available from both makers, the head grows from 30.2 to 31.2 mm, stem unchanged. Exhaust clears earlier towards the turbos, the chamber fills better and power rises. The machinist then brings the 12 exhaust seats to this diameter.

Exhaust valve technical specifications

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
F2131P*12 FERREA Standard 30.2 mm 6.9 mm 101.5 mm Super Alloy (nickel-based)
F2132P*12 FERREA +1 mm 31.2 mm 6.9 mm 101.5 mm Super Alloy (nickel-based)
NEVI-1032-7-12 SUPERTECH +1 mm 31.2 mm 6.9 mm 101.2 mm 1 Inconel
NEVI-1032-7-HS-12 SUPERTECH +1 mm 31.2 mm 6.9 mm 101.2 mm 1 Sodium-filled Inconel
NEVI-1032-7-L-12 SUPERTECH +1 mm 31.2 mm 6.9 mm 102.7 mm 1 Inconel

Valve fitting

PartNissan originalReinforced
Collets 13210-D4200 KPR-6N-6-ST-24 / K10072
Valve stem seals 13207-84A00 / 13207-D4201 VS-N7E-12
Valve guide 13213-05U10 GDE-NSR7-ET-12

The SUPERTECH valves on this page have a single groove: they are fitted with single groove collets, to be compared with the collets you reuse before refitting the springs.

The NEVI-1032-7-L has a stem tip 1.5 mm longer: the original retainer is not suitable, it is fitted with the RET-NRB60/TS-2 retainer.

At 30.15 mm (FERREA F2131P) the seats are left as they are; with a +1 mm version, the 12 exhaust seats are cut to 31.15 mm.

Technical guide

Our brands

SUPERTECH SUPERTECH, a company out of Silicon Valley, devotes three good decades of experience to competition valvetrains, valves first and foremost. Each model targets a given engine, with the metal its stresses call for, Inconel, titanium or stainless, then faces the test of rallying, the track and drag racing.
FERREA FERREA Racing Components, the business Horacio Ferrea and partner Daniel Urrutia set up in 1978, draws from its Florida and Argentina plants valves of titanium, stainless steel or nickel-bearing superalloy, adopted by teams racing on NASCAR ovals or drag strips.

How to choose

Two criteria settle the matter: the head diameter, which decides if any seat machining is needed, then the material, to be chosen according to the boost pressure aimed for and the use the car is meant for.

CriterionOption 1Option 2
Size Standard size, 30.2 mm
Sound exhaust seats, never recut: the valve goes in without any machining at all, straight onto the factory seat. Only FERREA offers it in this size for this engine.
+1 mm oversize, 31.2 mm
One extra millimetre lets the head open a more generous passage: around 10 to 12 cfm better per millimetre, turbos fed faster and a better filled cylinder, so a stronger engine. Seats get cut to this size, which also fixes seats that were reworked in the past.
Material Super Alloy or solid Inconel
FERREA Competition Plus Super Alloy and SUPERTECH solid Inconel both keep their strength beyond 800 °C. They suit an RB26DETT pushed past its factory boost, whether driven on the road or taken to circuit outings.
Sodium filled Inconel
At SUPERTECH, the hollowed stem containing sodium unloads part of the head's heat. This is the valve to go for on the most extreme builds, with big turbos, high boost held for long periods and repeated hard laps.

When reinforced valves become necessary

  • Turbo boost raised through new engine management (Inconel version advised)
  • Larger turbos or a switch to a big single turbo
  • Sharper cam profiles or stiffer springs
  • Repeated circuit days
  • Cylinder head reopened because the exhaust marked or burnt the valves

Vehicle compatibility

ModelEngine codePowerYears
Skyline GT-R 2.6 (R32, BNR32) RB26DETT 280 hp 1989-1993
Skyline GT-R 2.6 (R33, BCNR33) RB26DETT 280 hp 1994-1999
Skyline GT-R 2.6 (R34, BNR34) RB26DETT 280-333 hp 1999-2008
Stagea 2.6 Twin Turbo (WC34) RB26DETT 280 hp 1996-2001

OEM part number (exhaust valve): 13202-05U01

Important: a set of 12 covers a complete engine. The standard-size SUPERTECH NEVI-1030-7 is not offered on this page.

Don't forget the inlet valves

With the RB26DETT cylinder head removed, use the occasion to renew the inlet valves too, with each valve stem seal, in a single job. The matching pages:

Inlet valves RB26DETT →
Exhaust valve guides Nissan RB26DETT →

16 other products in the same category

Viewed products

Loading...