Skip to content
  • In stock
Trimetal connecting rod bearings ACL Ford 1.0 EcoBoost 3-cylinder Trimetal connecting rod bearings ACL Ford 1.0 EcoBoost 3-cylinder Trimetal connecting rod bearings ACL Ford 1.0 EcoBoost 3-cylinder Trimetal connecting rod bearings ACL Ford 1.0 EcoBoost 3-cylinder

Trimetal connecting rod bearings ACL Ford 1.0 EcoBoost 3-cylinder

€64.29 (tax incl.)
€71.44 (tax incl.) -10%

Set of 6 trimetal connecting rod half-bearings for the Ford 1.0 EcoBoost three-cylinder.

  • Brand and treatment: ACL Race
  • Compatibility: Ford Fiesta, Focus, B-MAX, C-MAX, EcoSport, Mondeo, Puma
  • Engine codes: 1.0 EcoBoost, all codes in the compatibility table
  • Available sizes: standard to +0.25 mm, increased-clearance version (HX)
3B7328H-STD
15 in stock in Europe (72h lead time)
Pay in installments

The Ford 1.0 EcoBoost three-cylinder engine

The 1.0 EcoBoost is Ford's turbocharged inline three-cylinder of about 1,000 cc, with direct injection, twin overhead camshafts and 12 valves. It powers the Fiesta, Focus, B-MAX, C-MAX, EcoSport, Mondeo and Puma, as well as the Tourneo and Transit Connect, Courier and Custom, hybrid versions included. All its versions share the same crankpin diameter: a single bearing set covers the whole family.

From the factory, this engine is fitted with standard production connecting rod bearings, sized for the loads of the original engine: as soon as power, engine speed or boost pressure increase, they reach their limits.

Trimetal connecting rod bearings

Three layers make up a trimetal bearing: the steel back for stiffness, the copper-lead intermediate layer for load capacity, then the anti-friction running layer that protects the crankpin. This set includes 6 half shells, that is 3 pairs.

Where an aluminium bi-metal bearing, designed for low to medium loads, withstands about 8,000 psi, a performance trimetal bearing goes up to 12,000 psi: 50% extra margin. That is what keeps it durable on an engine boosted by a turbo or supercharger, or pushed to high rpm.

Technical specifications

Fitment dimensions common to all references
ACL bearings
Crankpin Ø 40 mm
Housing bore Ø 43 mm
Width 15.6 mm
Tangless
ReferenceBrand and treatmentSizeWall thickness (mm)
3B7328H-STD ACL Race - Untreated Standard 1.498
3B7328HX-STD ACL Race - Untreated Std, increased clearance (HX) 1.485
3B7328H-.025 ACL Race - Untreated +0.025 1.511
3B7328H-.25 ACL Race - Untreated +0.25 1.623

Running clearance

Between the crankpin and the bearing there is a small gap, the running clearance, in which the oil film circulates.

In operation there is no metal-to-metal contact: the crankpin turns on this oil film, which supports the whole load. The clearance determines its thickness. A clearance that is too tight hinders oil flow, heats the assembly and promotes seizure; one that is too wide lets oil leak away, weakens the film and makes oil pressure drop. The correct clearance balances oil flow and film strength.

Size / gradeWhen to choose itACL Race Series
Standard (STD) Standard journal, not reground 0.045 to 0.053 mm
Increased clearance (HX) Wider clearance: high oil flow, high rpm 0.070 to 0.078 mm
+0.025 mm Polished journal 0.045 to 0.053 mm
+0.25 mm Journal reground to 0.25 mm 0.045 to 0.053 mm

Checking on assembly: lay a calibrated strip (Plastigauge) on the journal, torque the rod cap to spec, then compare the crushed strip against the gauge to read the clearance.

Plastigauge

Order the Plastigauge →

Technical guide

Designed for engine building and motorsport, these ACL trimetal connecting rod bearings carry much more load than an original bearing, whether the engine gains power, revs higher or receives a turbo or supercharger. They are available in several sizes: the standard size, a +0.025 mm size for a crankpin that has only been polished, a +0.25 mm regrind size and the HX version with increased clearance for high-revving engines or engines needing a high oil flow. That makes it possible to put a reground crankshaft back into service without changing range and to set the clearance for the oil and use.

The brand

ACL Bearing Company ACL Bearing Company has been making high-performance engine bearings in Australia since 1949. Its Race Series offers precise trimetal bearings, available in many sizes and proven in tuned and racing engines worldwide.

Vehicle compatibility

This connecting rod bearing set fits the 1.0 EcoBoost three-cylinder of the following Ford models:

BrandModel (chassis)Engine codePowerYears
FORD B-MAX (JK) 1.0 EcoBoost M1JA, M1JE, M1JH, SFJA, SFJB, SFJC, SFJD, YYJC 100–140 hp 2012–2017
FORD B-MAX Van (JK) 1.0 EcoBoost M1JA, M1JE, M1JH, SFJA, SFJB, SFJC, SFJD 100–125 hp 2012–2017
FORD C-MAX II (DXA/CB7, DXA/CEU) 1.0 EcoBoost B3DA, B7DA, M1DA, M1DD, M2DA, M2DC 100–125 hp 2012–2019
FORD C-MAX II Van 1.0 EcoBoost B7DA, M1DA, M1DD, M2DA, M2DC 100–125 hp 2012–2019
FORD ECOSPORT 1.0 EcoBoost M1JC, M1JJ, M1JU, SFJL, YYJD, YYJF 95–140 hp 2013–2022
FORD FIESTA Saloon 1.0 EcoBoost M1JE, M1JH 125 hp 2013–2017
FORD FIESTA VI (CB1, CCN) 1.0 EcoBoost / 1.0 Sport M1JE, M1JH, SFJA, SFJB, SFJC, SFJD, YYJA, YYJB 100–140 hp 2012–2017
FORD FIESTA VI Van 1.0 EcoBoost M1JE, M1JH, SFJA, SFJB, SFJC, SFJD, YYJA, YYJB 100–140 hp 2012–2017
FORD FIESTA VII (HJ, HF) 1.0 EcoBoost / 1.0 EcoBoost mHEV / 1.0 EcoBoost mHEV Active / 1.0 EcoBoost Active / 1.0 EcoBoost Flex B7JA, B7JB, B7JC, BZJA, M0JA, M0JB, M0JD, M1JL, M1JM, M1JP, Q0JA, Q0JB, Q0JC, Q0JD, SFJE, SFJF, SFJH, SFJJ, SFJK, SFJN, SFJP, Y7JA, YYJE, YYJG 85–155 hp 2017–
FORD FIESTA VII Van 1.0 EcoBoost / 1.0 EcoBoost mHEV / 1.0 EcoBoost Flex B7JA, B7JB, B7JC, M0JA, M1JL, M1JM, M1JP, SFJE, SFJF, SFJH, SFJJ, SFJK, SFJN, SFJP, YYJE 95–140 hp 2018–
FORD FOCUS III 1.0 EcoBoost M1DA, M1DC, M1DD, M1DH, M2DA, M2DB, M2DC, SFDA, SFDB 100–140 hp 2012–2020
FORD FOCUS III Saloon 1.0 EcoBoost M1DA, M1DC, M1DD, M1DH, M2DA, M2DB, M2DC, SFDA, SFDB 100–140 hp 2012–2020
FORD FOCUS III Hatchback Van 1.0 EcoBoost M1DA, M1DC, M1DD, M2DA, M2DB, M2DC, SFDA, SFDB 100–125 hp 2012–2017
FORD FOCUS III Estate Van 1.0 EcoBoost M1DA, M1DC, M1DD, M2DA, M2DB, M2DC, SFDA, SFDB 100–125 hp 2012–2020
FORD FOCUS III Turnier 1.0 EcoBoost M1DA, M1DC, M1DD, M1DH, M2DA, M2DB, M2DC, SFDA, SFDB 100–140 hp 2012–2020
FORD FOCUS IV (HN) 1.0 EcoBoost / 1.0 EcoBoost mHEV / 1.0 EcoBoost mHEV Active / 1.0 EcoBoost mHEV Flex B3DA, B7DA, B7DC, M0DC, R0DA, R0DB, SFDC 85–155 hp 2018–2025
FORD FOCUS IV Saloon (HM) 1.0 EcoBoost B3DA, B7DA 101–125 hp 2018–2025
FORD FOCUS IV Turnier (HP) 1.0 EcoBoost / 1.0 EcoBoost mHEV / 1.0 EcoBoost mHEV Flex B3DA, B7DA, B7DC, M0DC, R0DB, SFDC 85–155 hp 2018–2025
FORD GRAND C-MAX (DXA/CB7, DXA/CEU) 1.0 EcoBoost B3DA, B7DA, M1DA, M1DD, M2DA, M2DC 100–125 hp 2012–2019
FORD GRAND C-MAX Van 1.0 EcoBoost B7DA, M1DA, M1DD, M2DA, M2DC 100–125 hp 2012–2019
FORD MONDEO V Hatchback (CE) 1.0 EcoBoost M1CA, M1CB 125 hp 2015–2022
FORD MONDEO V Saloon (CD) 1.0 EcoBoost M1CA, M1CB 125 hp 2015–2022
FORD MONDEO V Turnier (CF) 1.0 EcoBoost M1CA, M1CB 125 hp 2015–2022
FORD PUMA (J2K, CF7) 1.0 EcoBoost / 1.0 EcoBoost mHEV / 1.0 ST EcoBoost mHEV B7JA, B7JB, B7JE, BZJA, M0JA, Q0JA 95–170 hp 2019–
FORD TOURNEO CONNECT / GRAND TOURNEO CONNECT V408 MPV 1.0 EcoBoost B3GA, M2GA, M2GB 100 hp 2013–2022
FORD TOURNEO COURIER B460 MPV 1.0 EcoBoost SFCA, SFCB, SFCC, SFCD, SFCE, SFCF 100 hp 2014–2023
FORD TOURNEO COURIER V769 MPV (N1P) 1.0 EcoBoost B7JA, B7JB, B7NB 125 hp 2023–
FORD TOURNEO CUSTOM V362 Bus (F3) 1.0 EcoBoost PHEV M1FA 125 hp 2020–2023
FORD TRANSIT CONNECT V408 Box Body/MPV 1.0 EcoBoost B3GA, M2GA, M2GB 100 hp 2013–
FORD TRANSIT COURIER B460 Box Body/MPV 1.0 EcoBoost SFCA, SFCB, SFCC, SFCD, SFCE, SFCF 100 hp 2014–2023
FORD TRANSIT COURIER B460 MPV 1.0 EcoBoost SFCA, SFCB, SFCC, SFCD, SFCE, SFCF 100 hp 2014–2023
FORD TRANSIT COURIER V769 Box Body/MPV (N3P) 1.0 EcoBoost B3DA, B3NB, B7JA, B7JB, B7NB 101–125 hp 2023–
FORD TRANSIT CUSTOM V362 Bus (F3) 1.0 EcoBoost PHEV M1FA 125 hp 2020–2023
FORD TRANSIT CUSTOM V362 Van (FY, FZ) 1.0 EcoBoost PHEV M1FA 125 hp 2020–2023

Why replace the bearings

When a connecting rod bearing gives way, the damage quickly spreads beyond the part itself: a scored crankpin, debris carried through the whole oil circuit, a crankshaft to regrind at the very least, sometimes a rod and block lost. A bearing set costs far less than a regrind and is nothing compared with a complete engine rebuild. It is the cheapest part of the rotating assembly, yet the one whose failure is most expensive.

4 other products in the same category

Viewed products

Loading...