Skip to content
  • In stock
Reinforced head gasket Ford 1.0 EcoBoost - C14140-032 Reinforced head gasket Ford 1.0 EcoBoost - C14140-032

Reinforced cylinder head gasket Ford 1.0 EcoBoost M1DA M1DC M1DD

€117.47 (tax incl.)
€156.62 (tax incl.) -25%

Reinforced Cometic head gasket, in multilayer MLX. Sold individually, one gasket per engine.

  • Brand: Cometic
  • Engines: M1DA, M1DC, M1DD
  • Bore: 73 mm
  • Thicknesses: 0.71 to 1.27 mm
  • Replaces: 1 771 609, 1 857 022, 2207975
C14140-032
3 in stock in Europe (72h lead time)
Pay in installments

The Ford engines covered

The Ford 1.0-litre EcoBoost engines, identified by the codes M1DA, M1DC, M1DD, M1DH, M2DA, M2DB, M2DC, M1CA, M1CB, M1JE, M1JH, M1JL, M1JM, M1JP, SFDA, SFDB, SFDC, SFJA, SFJB, SFJC, SFJD, SFJE, SFJF, SFJH, SFJJ, SFJK, SFJN, SFJP, Y7JA, YYJA, YYJB, YYJE, YYJG, B7DA, B7DC, B7JA, B7JB, B7JC, B7JE, B7JG, B3DA, M0DC, M0JA, M0JB, M0JD, Q0JA, Q0JB, Q0JC, Q0JD and BZJA, power the Fiesta, Focus, B-MAX, C-MAX, Mondeo, Puma, Tourneo Courier and Transit Courier detailed below, from 2012 to 2025. With a single cylinder head, the gasket is sold individually: one is needed per engine.

The original gasket carries the part numbers 1 771 609, 1 857 022 and 2207975, depending on the engine. Ford publishes neither its bore, nor its thickness, nor its construction. It is sized for standard combustion pressure: when that rises, the clamping load eases off, the head lifts and coolant reaches a cylinder.

Reinforced cylinder head gaskets

The head gasket is not alone in ensuring the seal: the fasteners that clamp the head to the block contribute just as much. A composite gasket sags for good beyond 100 N/mm², whereas the 301 stainless steel of the MLX withstands 517 N/mm², 5 times more, and regains its shape at every combustion.

This page describes the part numbers of Cometic, the American maker of competition gaskets, in a single construction: the MLX with its chamber stopper. The bore is 73 mm and the thicknesses run from 0.71 to 1.27 mm, enough to adjust the compression ratio without touching the pistons or the cylinder head. As a rule, the gasket bore chosen is at least 0.5 mm larger than the actual cylinder bore. The part numbers are sold separately, individually. As the engine has just one cylinder head, order a single part number per engine, according to the thickness wanted.

Technical specifications

Gasket bore Thickness Gasket volume Gasket type
OEM not specified
OEM not specified
OEM not specified
Brand Part number
OEM 1 771 609 (M1DA, M1DC, M1DD, M2DA, M2DB, M2DC, M1CA, M1CB, M1JE, M1JH, M1JL, M1JM, M1JP, SFDA, SFDB, SFJA, SFJB, SFJC, SFJD, SFJE, SFJF, SFJH, SFJJ, SFJK, SFJN, SFJP, Y7JA, Q0JA, Q0JB, Q0JC, Q0JD)
OEM 1 857 022 (M1DH, YYJA, YYJB, YYJE, YYJG)
OEM 2207975 (SFDC, B7DA, B7DC, B7JA, B7JB, B7JC, B7JE, B7JG, B3DA, M0DC, M0JA, M0JB, M0JD, BZJA)
73 mm 0.71 mm 2.97 MLX Cometic H4981028S
73 mm 0.81 mm 3.39 MLX Cometic C14140-032
73 mm 0.91 mm 3.81 MLX Cometic H4981036S
73 mm 1.02 mm 4.27 MLX Cometic H4981040S
73 mm 1.12 mm 4.69 MLX Cometic H4981044S
73 mm 1.17 mm 4.90 MLX Cometic H4981046S
73 mm 1.27 mm 5.32 MLX Cometic H4981050S

The volume of a gasket is the room it makes above each cylinder. It adds to the combustion chamber and lowers the compression ratio the more, the larger it is. Only compare these figures between gaskets of the same bore.

Preparation and fitting

Fasteners Engines Tightening torque
Original cylinder head bolts M1DA, M1DC, M1DD, M1DH, M2DA, M2DB, M2DC, M1CA, M1CB, M1JE, M1JH, M1JL, M1JM, M1JP, SFDA, SFDB, SFDC, SFJA, SFJB, SFJC, SFJD, SFJE, SFJF, SFJH, SFJJ, SFJK, SFJN, SFJP, Y7JA, YYJA, YYJB, YYJE, YYJG, B7DA, B7DC, B7JA, B7JB, B7JC, B7JE, B7JG, B3DA, M0DC, M0JA, M0JB, M0JD, Q0JA, Q0JB, Q0JC, Q0JD, BZJA not published by the manufacturer

When fitting, check with a straightedge that the head and block faces are true, and have them resurfaced if needed. These gaskets go on dry: Cometic supplies them already coated, so no sealant is to be added.

Technical guide

The construction offered

Cometic MLX cylinder head gasket Cometic MLX
A multilayer stainless steel gasket whose centre sheet is folded into a stopper around the combustion chamber, under a high-temperature coating. The clamping load concentrates where it is useful without distorting the bore any further. It is the toughest of the all-steel gaskets, to be kept for severe boost; here it only comes in 73 mm.

Choosing bore and thickness

Gasket bore. The Cometic MLX only comes here in 73 mm, in seven thicknesses.

Thickness. Ford publishes no thickness for the original gasket. A thicker gasket enlarges the combustion chamber and lowers the compression ratio; a thinner one reduces it and raises the ratio.

Your goal Thickness to choose
Keep the original compression ratio Original thickness not published: measure the removed gasket and pick, between 0.71 and 1.27 mm, the closest figure
Skimmed cylinder head, make up the lost height Between 0.71 and 1.27 mm, start from the thickness of the removed gasket, plus the metal taken off when resurfacing
Forced induction build, lower the ratio 1.27 mm, if the removed gasket is thinner
Naturally aspirated build, raise the ratio 0.71 mm, if the removed gasket is thicker

With no published original thickness, use a dial gauge to measure how far the pistons stand above the block deck, especially after resurfacing: this figure gives the clearance left between piston and cylinder head.

The brand

Cometic Cometic Gasket, Inc. is an American company founded in 1989 in Concord, Ohio. It makes gaskets and sealing solutions for engines, its speciality being the gasket cut to order, in the bore and thickness wanted. All production stays in the United States, from American materials.

Advantages over the original gasket

Criterion Original gasket 1 771 609, 1 857 022 and 2207975 Reinforced gaskets
Construction Construction not stated by the manufacturer Multi-layer stainless steel (MLX)
Gasket bore not published by the manufacturer 73 mm
Thicknesses available not published by the manufacturer 0.71 to 1.27 mm, 7 values
Compression ratio adjustment None Through the thickness chosen
Resistance to overpressure Limited to standard output Designed for forced induction

When a reinforced gasket becomes necessary

  • Adding forced induction, or raising boost on an already turbocharged engine
  • Cylinder rebored beyond what the 73 mm bore of the gasket offered covers
  • Looking for a compression ratio different from standard, higher or lower
  • Engine that has already lost its gasket, or is consuming coolant
  • Competition use, where the gasket goes through repeated temperature rises

Vehicle compatibility

Brand Model Engine code Power Years
Ford FOCUS III 1.0 EcoBoost M1DC, M1DA, M1DD, SFDA, SFDB, M2DB, M2DC, M2DA 100 and 125 hp 2012-2017
Ford FOCUS III Turnier 1.0 EcoBoost SFDA, SFDB, M2DB, M2DC, M2DA, M1DC, M1DA, M1DD 100 and 125 hp 2012-2020
Ford FOCUS III Berline tricorps 1.0 EcoBoost SFDA, SFDB, M2DB, M2DC, M2DA, M1DC, M1DA, M1DD 100 and 125 hp 2012-2020
Ford B-MAX (JK) 1.0 EcoBoost SFJC, SFJD, SFJA, SFJB, M1JE, M1JH 100 and 125 hp 2012-2017
Ford C-MAX II (DXA/CB7, DXA/CEU) 1.0 EcoBoost M2DC, M2DA, M1DA, M1DD 100 and 125 hp 2012-2019
Ford GRAND C-MAX (DXA/CB7, DXA/CEU) 1.0 EcoBoost M2DC, M2DA, M1DA, M1DD 100 and 125 hp 2012-2019
Ford FIESTA VI (CB1, CCN) 1.0 EcoBoost SFJC, SFJD, SFJA, SFJB 100 hp 2013-2017
Ford FIESTA VI (CB1, CCN) 1.0 EcoBoost M1JE, M1JH 125 hp 2012-2017
Ford FIESTA VI (CB1, CCN) 1.0 Sport YYJA, YYJB 140 hp 2014-2017
Ford FIESTA Berline tricorps 1.0 EcoBoost M1JE, M1JH 125 hp 2013-2017
Ford GRAND C-MAX Van 1.0 EcoBoost M2DC, M2DA 100 hp 2012-2018
Ford GRAND C-MAX Van 1.0 EcoBoost B7DA, M1DA, M1DD 125 hp 2012-2019
Ford C-MAX II Van 1.0 EcoBoost M2DC, M2DA, B7DA, M1DA, M1DD 100 and 125 hp 2012-2019
Ford B-MAX Van (JK) 1.0 EcoBoost SFJC, SFJD, SFJA, SFJB, M1JE, M1JH 100 and 125 hp 2012-2017
Ford FIESTA VI Van 1.0 EcoBoost M1JE, M1JH 125 hp 2012-2017
Ford FIESTA VI Van 1.0 EcoBoost YYJA, YYJB 140 hp 2014-2017
Ford FIESTA VI Van 1.0 EcoBoost SFJC, SFJD, SFJA, SFJB 100 hp 2013-2017
Ford MONDEO V Berline à hayon (CE) 1.0 EcoBoost M1CA, M1CB 125 hp 2015-2022
Ford MONDEO V Turnier (CF) 1.0 EcoBoost M1CA, M1CB 125 hp 2015-2022
Ford FOCUS III Fourgon/Break 1.0 EcoBoost SFDA, SFDB, M2DB, M2DC, M2DA, M1DC, M1DA, M1DD 100 and 125 hp 2012-2020
Ford FOCUS III Fourgon/berline à hayon 1.0 EcoBoost SFDA, SFDB, M2DB, M2DC, M2DA, M1DC, M1DA, M1DD 100 and 125 hp 2012-2017
Ford MONDEO V Berline tricorps (CD) 1.0 EcoBoost M1CA, M1CB 125 hp 2015-2022
Ford FIESTA VII (HJ, HF) 1.0 EcoBoost SFJH, SFJN, Y7JA, SFJJ, SFJP, SFJK, SFJE, SFJF, M1JM, M1JL, M1JP, YYJE, YYJG 101, 125 and 140 hp 2017-2017
Ford FOCUS III Turnier 1.0 EcoBoost M1DH 140 hp 2017-2020
Ford FOCUS III 1.0 EcoBoost M1DH 140 hp 2017-2020
Ford FOCUS III Berline tricorps 1.0 EcoBoost M1DH 140 hp 2017-2020
Ford FOCUS IV (HN) 1.0 EcoBoost B3DA, B7DA, SFDC 85, 101 and 125 hp 2018-2025
Ford FOCUS IV Turnier (HP) 1.0 EcoBoost SFDC, B3DA, B7DA 85, 101 and 125 hp 2018-2025
Ford FIESTA VII (HJ, HF) 1.0 EcoBoost Q0JA, Q0JB, Q0JC, Q0JD 85 hp 2018-2018
Ford FIESTA VII Van 1.0 EcoBoost M1JM, M1JL, M1JP 125 hp 2018-2018
Ford FOCUS IV Berline tricorps (HM) 1.0 EcoBoost B3DA, B7DA 101 and 125 hp 2018-2025
Ford FIESTA VII Van 1.0 EcoBoost SFJH, SFJN, SFJJ, SFJP, SFJK, SFJE, SFJF, YYJE, M0JA 95, 101 and 140 hp 2019-2019
Ford PUMA (J2K, CF7) 1.0 EcoBoost B7JA, B7JB, B7JE, M0JA 95 and 125 hp 2019-2019
Ford PUMA (J2K, CF7) 1.0 EcoBoost mHEV B7JA, B7JB, BZJA 125 and 155 hp 2019-2019
Ford FIESTA VII (HJ, HF) 1.0 EcoBoost M0JA, M0JB 95 hp 2019-2019
Ford FOCUS IV Turnier (HP) 1.0 EcoBoost mHEV M0DC, B7DA, B7DC 125 and 155 hp 2020-2025
Ford FOCUS IV (HN) 1.0 EcoBoost mHEV M0DC, B7DA, B7DC 125 and 155 hp 2020-2025
Ford FIESTA VII (HJ, HF) 1.0 EcoBoost mHEV B7JA, B7JB, B7JC 125 hp 2019-2019
Ford FIESTA VII (HJ, HF) 1.0 EcoBoost mHEV BZJA 155 hp 2020-2020
Ford FIESTA VII (HJ, HF) 1.0 EcoBoost mHEV Active BZJA, B7JA, B7JB, B7JC 125 and 155 hp 2021-2021
Ford FOCUS IV (HN) 1.0 EcoBoost mHEV Active B7DA 125 hp 2021-2025
Ford FIESTA VII (HJ, HF) 1.0 EcoBoost Active M1JM, M1JL, M1JP, YYJE, SFJH, SFJN, Y7JA, SFJJ, SFJP, SFJK, SFJE, SFJF 101, 125 and 140 hp 2018-2018
Ford C-MAX II (DXA/CB7, DXA/CEU) 1.0 EcoBoost B3DA, B7DA 101 and 125 hp 2018-2019
Ford FIESTA VII Van 1.0 EcoBoost mHEV B7JA, B7JB, B7JC 125 hp 2020-2020
Ford GRAND C-MAX (DXA/CB7, DXA/CEU) 1.0 EcoBoost B3DA, B7DA 101 and 125 hp 2018-2019
Ford FIESTA VII (HJ, HF) 1.0 EcoBoost B7JA, B7JB, B7JC 125 hp 2020-2020
Ford PUMA (J2K, CF7) 1.0 Flexifuel B7JG 125 hp 2021-2021
Ford FOCUS IV (HN) 1.0 EcoBoost mHEV Flex B7DA 125 hp 2022-2025
Ford FOCUS IV Turnier (HP) 1.0 EcoBoost mHEV Flex B7DA 125 hp 2022-2025
Ford FIESTA VII (HJ, HF) 1.0 EcoBoost Flex M0JD, M0JA 95 hp 2020-2022
Ford FIESTA VII Van 1.0 EcoBoost Flex M0JA 95 hp 2019-2019
Ford PUMA (J2K, CF7) 1.0 EcoBoost mHEV Q0JA 160 hp 2023-2023
Ford PUMA (J2K, CF7) 1.0 ST EcoBoost mHEV Q0JA 170 hp 2023-2023
Ford TOURNEO COURIER V769 Monospace (N1P) 1.0 EcoBoost B7JA, B7JB 125 hp 2023-2023
Ford TRANSIT COURIER V769 Fourgon/monospace (N3P) 1.0 EcoBoost B3DA, B7JA, B7JB 101 and 125 hp 2023-2023

OEM part number: 1 771 609, 1 857 022, 2207975.

Important: the part numbers on this page are set for the Ford 1.0-litre EcoBoost engines in the table, from 2012 to 2025. For any other vehicle, note the engine code before ordering.

Why switch to a reinforced gasket?

When the original gasket is at the end of its tether, the reinforced one carries on: under higher combustion pressure, it holds its shape and is not crushed.

As soon as power climbs, with a bigger turbo, a supercharger or a raised compression ratio, the head gasket is the first link to fail at the top of the engine. A reinforced gasket rules out the failure, and with it the head removal, far costlier than the part.

4 other products in the same category

Viewed products

Loading...