- In stock
Tri-metal crankshaft main bearings ACL Ford 1.0 EcoBoost 3-cylinder
Set of 8 tri-metal crankshaft main bearing shells for the four main bearings of the Ford 1.0 EcoBoost three-cylinder engine (Ø 44 mm).
- Brand: ACL Race
- Compatibility: Ford Fiesta, Focus, B-MAX, C-MAX, EcoSport, Mondeo, Puma
- Engine codes: all codes in the compatibility table
- Available sizes: standard, +0.025 mm and +0.25 mm, increased clearance version (HX)
The Ford 1.0 L EcoBoost engine
ACL lists main bearing set 4M7330H for the Ford 1.0 L EcoBoost three-cylinder turbo engine (Fiesta, Focus). A single main bearing set covers this petrol engine.
The crankshaft of these engines runs on four main bearings. Each journal turns between two half shells, one seated in the block and the other in the main bearing cap: they carry the crankshaft. The ACL Race Series tri-metal set shown here replaces them on built engines.
Tri-metal main bearings
Three layers make up a trimetal bearing: the steel back for stiffness, the copper-lead intermediate layer for load capacity, then the anti-friction running layer that protects the main journal. The complete set covers the four main bearings of the crankshaft. The upper and lower half shells are different: each goes in its own position.
Where an aluminium bi-metal bearing, designed for low to medium loads, withstands about 8,000 psi, a performance trimetal bearing goes up to 12,000 psi: 50% extra margin. That is what keeps it durable on an engine boosted by a turbo or supercharger, or pushed to high rpm.
Technical specifications
| ACL bearings Crankshaft journal Ø 44 mm Housing bore Ø 48 mm Width 15.95 mm |
Manufacturer's note (ACL 4M7330H): the bearings have no notches.
| Reference | Brand and treatment | Size | Wall thickness (mm) |
|---|---|---|---|
| 4M7330H-STD | ACL Race - Untreated | Standard | 1.994 |
| 4M7330HX-STD | ACL Race - Untreated | Std, increased clearance (HX) | 1.981 |
| 4M7330H-.025 | ACL Race - Untreated | +0.025 | 2.0065 |
| 4M7330H-.25 | ACL Race - Untreated | +0.25 | 2.119 |
Running clearance
Between the main journal and the bearing there is a small gap, the running clearance, in which the oil film circulates.
In operation there is no metal-to-metal contact: the main journal turns on this oil film, which supports the whole load. The clearance determines its thickness. A clearance that is too tight hinders oil flow, heats the assembly and promotes seizure; one that is too wide lets oil leak away, weakens the film and makes oil pressure drop. The correct clearance balances oil flow and film strength.
| Size / grade | When to choose it | ACL Race Series |
|---|---|---|
| Standard (STD) | Standard journal, not reground | 0.048 to 0.057 mm |
| Increased clearance (HX) | Wider clearance: high oil flow, high rpm | 0.074 to 0.082 mm |
| +0.025 mm | Polished journal | 0.048 to 0.057 mm |
| +0.25 mm | Journal reground to 0.25 mm | 0.048 to 0.057 mm |
Checking on assembly: lay a calibrated strip (Plastigauge) on the journal, torque the main cap to spec, then compare the crushed strip against the gauge to read the clearance.

Technical guide
Designed for engine building and motorsport, these ACL trimetal main bearings carry much more load than an original bearing, whether the engine gains power, revs higher or receives a turbo or supercharger. They are available in several sizes: the standard size, a +0.025 mm size for a main journal that has only been polished, a +0.25 mm regrind size and the HX version with increased clearance for high-revving engines or engines needing a high oil flow. That makes it possible to put a reground crankshaft back into service without changing range and to set the clearance for the oil and use.
The brand
![]() |
ACL Bearing Company has been making high-performance engine bearings in Australia since 1949. Its Race Series offers precise trimetal bearings, available in many sizes and proven in tuned and racing engines worldwide. |
Vehicle compatibility
This main bearing set fits the following vehicles, by engine code:
| Brand | Model (chassis) | Engine code | Power | Years |
|---|---|---|---|---|
| FORD | B-MAX (JK) 1.0 EcoBoost | M1JA, M1JE, M1JH, SFJA, SFJB, SFJC, SFJD, YYJC | 100–140 hp | 2012–2017 |
| FORD | B-MAX Van (JK) 1.0 EcoBoost | M1JA, M1JE, M1JH, SFJA, SFJB, SFJC, SFJD | 100–125 hp | 2012–2017 |
| FORD | C-MAX II (DXA/CB7, DXA/CEU) 1.0 EcoBoost | B3DA, B7DA, M1DA, M1DD, M2DA, M2DC | 100–125 hp | 2012–2019 |
| FORD | C-MAX II Van 1.0 EcoBoost | B7DA, M1DA, M1DD, M2DA, M2DC | 100–125 hp | 2012–2019 |
| FORD | ECOSPORT 1.0 EcoBoost | M1JC, M1JJ, M1JU, SFJL, YYJD, YYJF | 95–140 hp | 2013–2022 |
| FORD | FIESTA Saloon 1.0 EcoBoost | M1JE, M1JH | 125 hp | 2013–2017 |
| FORD | FIESTA VI (CB1, CCN) 1.0 EcoBoost / 1.0 Sport | M1JE, M1JH, SFJA, SFJB, SFJC, SFJD, YYJA, YYJB | 100–140 hp | 2012–2017 |
| FORD | FIESTA VI Van 1.0 EcoBoost | M1JE, M1JH, SFJA, SFJB, SFJC, SFJD, YYJA, YYJB | 100–140 hp | 2012–2017 |
| FORD | FIESTA VII (HJ, HF) 1.0 EcoBoost / 1.0 EcoBoost mHEV / 1.0 EcoBoost mHEV Active / 1.0 EcoBoost Active / 1.0 EcoBoost Flex | B7JA, B7JB, B7JC, BZJA, M0JA, M0JB, M0JD, M1JL, M1JM, M1JP, Q0JA, Q0JB, Q0JC, Q0JD, SFJE, SFJF, SFJH, SFJJ, SFJK, SFJN, SFJP, Y7JA, YYJE, YYJG | 85–155 hp | 2017– |
| FORD | FIESTA VII Van 1.0 EcoBoost / 1.0 EcoBoost mHEV / 1.0 EcoBoost Flex | B7JA, B7JB, B7JC, M0JA, M1JL, M1JM, M1JP, SFJE, SFJF, SFJH, SFJJ, SFJK, SFJN, SFJP, YYJE | 95–140 hp | 2018– |
| FORD | FOCUS III 1.0 EcoBoost | M1DA, M1DC, M1DD, M1DH, M2DA, M2DB, M2DC, SFDA, SFDB | 100–140 hp | 2012–2020 |
| FORD | FOCUS III Saloon 1.0 EcoBoost | M1DA, M1DC, M1DD, M1DH, M2DA, M2DB, M2DC, SFDA, SFDB | 100–140 hp | 2012–2020 |
| FORD | FOCUS III Hatchback Van 1.0 EcoBoost | M1DA, M1DC, M1DD, M2DA, M2DB, M2DC, SFDA, SFDB | 100–125 hp | 2012–2017 |
| FORD | FOCUS III Estate Van 1.0 EcoBoost | M1DA, M1DC, M1DD, M2DA, M2DB, M2DC, SFDA, SFDB | 100–125 hp | 2012–2020 |
| FORD | FOCUS III Turnier 1.0 EcoBoost | M1DA, M1DC, M1DD, M1DH, M2DA, M2DB, M2DC, SFDA, SFDB | 100–140 hp | 2012–2020 |
| FORD | FOCUS IV (HN) 1.0 EcoBoost / 1.0 EcoBoost mHEV / 1.0 EcoBoost mHEV Active / 1.0 EcoBoost mHEV Flex | B3DA, B7DA, B7DC, M0DC, R0DA, R0DB, SFDC | 85–155 hp | 2018–2025 |
| FORD | FOCUS IV Saloon (HM) 1.0 EcoBoost | B3DA, B7DA | 101–125 hp | 2018–2025 |
| FORD | FOCUS IV Turnier (HP) 1.0 EcoBoost / 1.0 EcoBoost mHEV / 1.0 EcoBoost mHEV Flex | B3DA, B7DA, B7DC, M0DC, R0DB, SFDC | 85–155 hp | 2018–2025 |
| FORD | GRAND C-MAX (DXA/CB7, DXA/CEU) 1.0 EcoBoost | B3DA, B7DA, M1DA, M1DD, M2DA, M2DC | 100–125 hp | 2012–2019 |
| FORD | GRAND C-MAX Van 1.0 EcoBoost | B7DA, M1DA, M1DD, M2DA, M2DC | 100–125 hp | 2012–2019 |
| FORD | MONDEO V Hatchback (CE) 1.0 EcoBoost | M1CA, M1CB | 125 hp | 2015–2022 |
| FORD | MONDEO V Saloon (CD) 1.0 EcoBoost | M1CA, M1CB | 125 hp | 2015–2022 |
| FORD | MONDEO V Turnier (CF) 1.0 EcoBoost | M1CA, M1CB | 125 hp | 2015–2022 |
| FORD | PUMA (J2K, CF7) 1.0 EcoBoost / 1.0 EcoBoost mHEV / 1.0 ST EcoBoost mHEV | B7JA, B7JB, B7JE, BZJA, M0JA, Q0JA | 95–170 hp | 2019– |
| FORD | TOURNEO CONNECT / GRAND TOURNEO CONNECT V408 MPV 1.0 EcoBoost | B3GA, M2GA, M2GB | 100 hp | 2013–2022 |
| FORD | TOURNEO COURIER B460 MPV 1.0 EcoBoost | SFCA, SFCB, SFCC, SFCD, SFCE, SFCF | 100 hp | 2014–2023 |
| FORD | TOURNEO COURIER V769 MPV (N1P) 1.0 EcoBoost | B7JA, B7JB, B7NB | 125 hp | 2023– |
| FORD | TOURNEO CUSTOM V362 Bus (F3) 1.0 EcoBoost PHEV | M1FA | 125 hp | 2020–2023 |
| FORD | TRANSIT CONNECT V408 Box Body/MPV 1.0 EcoBoost | B3GA, M2GA, M2GB | 100 hp | 2013– |
| FORD | TRANSIT COURIER B460 Box Body/MPV 1.0 EcoBoost | SFCA, SFCB, SFCC, SFCD, SFCE, SFCF | 100 hp | 2014–2023 |
| FORD | TRANSIT COURIER B460 MPV 1.0 EcoBoost | SFCA, SFCB, SFCC, SFCD, SFCE, SFCF | 100 hp | 2014–2023 |
| FORD | TRANSIT COURIER V769 Box Body/MPV (N3P) 1.0 EcoBoost | B3DA, B3NB, B7JA, B7JB, B7NB | 101–125 hp | 2023– |
| FORD | TRANSIT CUSTOM V362 Bus (F3) 1.0 EcoBoost PHEV | M1FA | 125 hp | 2020–2023 |
| FORD | TRANSIT CUSTOM V362 Van (FY, FZ) 1.0 EcoBoost PHEV | M1FA | 125 hp | 2020–2023 |
Why replace the bearings
When a main bearing gives way, the damage quickly spreads beyond the part itself: a scored main journal, debris carried through the whole oil circuit, a crankshaft to regrind at the very least, sometimes a damaged block. A bearing set costs far less than a regrind and is nothing compared with a complete engine rebuild. It is the cheapest part of the crankshaft assembly, yet the one whose failure is most expensive.
-
Brand
-
Reference4M7330H-STD
