- On order
Reinforced inlet valves SUPERTECH NISSAN VG30DE VG30DET VG30DETT
Set of 12 reinforced inlet valves for NISSAN VG30DE, VG30DET and VG30DETT.
- Brands: SUPERTECH, FERREA
- Engines: VG30DE, VG30DET, VG30DETT
- Dimensions: 34 mm, 34.5 mm or 35 mm head, 5.97 mm or 6 mm stem
- Material: black nitride stainless steel or stainless steel with chrome stem
NISSAN engines covered
The VG30DE is Nissan's 3.0 litre V6 with 24 valves and twin overhead camshafts per bank; the VG30DET and VG30DETT are its turbo and twin-turbo versions. From 1986 to 2001 they powered the 300ZX Z32, the Cedric, Gloria and Cima, the Leopard F31 and the Maxima QX A32 and A33, with 185 to 305 hp.
Each engine has 12 inlet valves, two per cylinder, with an original head of 34.0 to 34.2 mm and a stem of 5.965 to 5.980 mm. Higher boost, a sharper camshaft or more revs load them far beyond standard use.
SUPERTECH and FERREA reinforced inlet valves
On this 24-valve V6 every inlet valve uncovers and then seals the port on each cam revolution, drops back onto its seat and glides constantly in its guide, adding up to thousands of strokes a minute at high revs. Its working range spans 400 to 550 °C; within it, an ordinary chrome-silicon steel goes from 500 MPa at 500 °C to only 250 MPa at 600 °C, giving up 50 % of its strength. Turbo boost, a more aggressive cam profile or higher revs add further to the loads the valve must survive.
The SUPERTECH valves are in stainless from the EV8 family, which holds 650 MPa at 500 °C and 550 MPa at 600 °C, 30 % and then 120 % better than ordinary steel; black nitriding also gives them a hard, smooth surface that limits stem wear. The FERREA valves belong to the Competition Plus range, chromed-stem stainless: this series claims 20 % more strength under heat and fatigue, plus a seat whose service life stretches by 25 %, enough to cope with serious boost.
Two oversizes enlarge the head: 34.5 mm (+0.5 mm) from SUPERTECH and 35 mm (+1 mm) from FERREA, alongside the latter's 34 mm standard size, with stem diameter and length unchanged. The flow area at the seat grows, cylinder filling improves and power increases, provided each of the 12 inlet seats is machined to suit.
Inlet valve technical specification
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| NIVN-1017-12 | SUPERTECH | +0.5 mm | 34.5 mm | 5.97 mm | 103.15 mm | 1 | Black nitride stainless steel |
| F1847P*12 | FERREA | Standard | 34 mm | 6 mm | 103.13 mm | Stainless, chrome stem | |
| F1848P*12 | FERREA | +1 mm | 35 mm | 6 mm | 103.13 mm | Stainless, chrome stem |
Set of 12 SUPERTECH inlet valves for the Nissan 300ZX VG30D: 34.5 mm head (0.5 mm oversize), 5.97 mm stem, 103.15 mm length, black nitride stainless steel.
F1847P*12 and F1848P*12: for the twin-turbo VG30DETT of the 300ZX Z32.
Fitting details
| Part | NISSAN original | Reinforced |
|---|---|---|
| Collets | 13210-D4200 | KPR-6N-6-ST-24 |
| Valve stem seals | 13207-84A00 / 13207-D4201 | VS-N6I-12 |
| Valve guide | 13212-F6560 | GDE-NVG30-I |
The +0.5 mm oversize requires inlet seats cut to 34.5 mm before fitting.
The VG30 has hydraulic tappets: there is no valve clearance to set after reassembly.
Technical guide
Our brands
| SUPERTECH Performance, operating from San Jose in California, has spent over thirty years developing racing valvetrain parts. Its series are checked by ultrasound, radiography and laser, then validated in real conditions on circuit, drift and drag engines. | |
| FERREA Racing Components came into being in Fort Lauderdale, Florida, in 1978, driven by two Argentine engine builders. The company forges each valve as a single piece out of bar stock and machines it entirely on CNC equipment, for NASCAR or drag racing. |
How to choose
Two criteria guide the choice on this V6: the head size, chosen to suit the inlet seats, then the brand, which also depends on the VG30DE or VG30DETT version.
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Standard size 34 mm head, to choose when nobody has yet touched the inlet seats, still at factory size. Only FERREA offers it, in Competition Plus, aimed at the VG30DETT twin-turbo of the 300ZX Z32; one set of 12 covers the whole engine. |
Oversize 34.5 mm (+0.5 mm) from SUPERTECH or 35 mm (+1 mm) from FERREA: the area open to the air grows, with a gain of around 10 to 12 cfm per millimetre of head. The seats then need machining to the larger diameter, ideally alongside some port work; this option also lets you reuse seats that were refaced earlier. |
| Brand | SUPERTECH Set of 12 in black nitride stainless, single groove, at +0.5 mm, with a 5.97 mm stem and 103.15 mm length: a good compromise for a tuned naturally aspirated VG30DE, or a car that mixes road driving with the odd track day. |
FERREA Competition Plus in standard size or +1 mm, with a 6 mm chromed stem and 103.13 mm length, intended for the VG30DETT: the choice for hard-pushed twin-turbos, drifting and long track sessions, where heat builds the most. |
When reinforced valves become necessary
- Boost raised on a VG30DETT
- High-lift camshafts or firmer springs
- Rev limit raised further
- Heads overhauled for circuit work, drifting or the drag strip
- Tired Nissan valves, or seats already cut to repair size
Compatible vehicles
| Model | Engine code | Power | Years |
|---|---|---|---|
| 300ZX (Z32) 3.0 | VG30DE | 226-228 hp | 1989-1997 |
| 300ZX Convertible (Z32) 3.0 | VG30DE | 226 hp | 1992-1996 |
| 300ZX (Z32) 3.0 Twin Turbo | VG30DETT | 268-305 hp | 1990-1997 |
| Cedric (Y32) 3.0 | VG30DE | 193-200 hp | 1991-1995 |
| Cedric (Y32) 3.0 Turbo | VG30DET | 271 hp | 1992-1995 |
| Cima (Y31) 3.0 | VG30DE | 203 hp | 1988-1991 |
| Cima (Y31) 3.0 Turbo | VG30DET | 258 hp | 1988-1991 |
| Cima (Y32) 3.0 | VG30DET | 256 hp | 1991-1996 |
| Gloria VIII (Y31) 3.0 | VG30DE | 200 hp | 1987-1991 |
| Gloria VIII (Y31) 3.0 | VG30DET | 254 hp | 1991-1995 |
| Gloria (Y32) 3.0 | VG30DE | 200 hp | 1991-1995 |
| Gloria (Y32) 3.0 | VG30DET | 254 hp | 1991-1995 |
| Leopard II (F31) 3.0 | VG30DET | 185 hp | 1986-1988 |
| Leopard II (F31) 3.0 Supercharged | VG30DET | 254 hp | 1988-1991 |
| Maxima QX IV (A32) 3.0 | VG30DE | 193 hp | 1994-1999 |
| Maxima QX V (A33) 3.0 | VG30DE | 226 hp | 1999-2001 |
OEM part number (inlet valve): 13201-F6511 (Cima Y32 VG30DET, 1993-1996)
Related products
With the VG30 heads off, take the chance to replace the 12 exhaust valves as well; a reinforced version is available on the next page:
| NISSAN 300ZX VG30DE VG30DETT exhaust valves → |
-
Brand
-
ReferenceNIVN-1017-12