- In stock
Reinforced exhaust valves BMW B48B20 B48A20 B46A20
Set of 8 reinforced exhaust valves for BMW B48 and B46.
- Brand: SUPERTECH
- Engines: B48B20, B48A20, B46A20
- Dimensions: 28.5 mm or 29.5 mm head, 6 mm stem
- Material: sodium filled Inconel, single groove
BMW engines covered
The B48 is the 1,998 cc turbocharged four-cylinder of the BMW modular family (82 mm bore, 94.6 mm stroke), built since 2014; the B46 takes the same exhaust valve. It is found in the 120i, 125i, 220i, 230i, 320i, 330i, 420i, 430i, 520i, 530i and the Z4 20i and 30i.
Its 16 valve cylinder head has 8 exhaust valves, with a 6 mm stem and a single groove. A simple remap greatly increases the boost pressure of this engine, and with it the temperature its exhaust valves have to withstand.
SUPERTECH reinforced exhaust valves
The B48 and B46 send their exhaust gases straight to the turbine: on every cycle, the valve opens into that scorching stream. Its head goes beyond 1,000 °C there, against 760 to 870 °C for an engine without a turbo. Some 75 % of this heat drains into the head across the seat, and 20 % across the guide. As a reference point, an EV8 family steel withstands 550 MPa around 600 °C, yet holds only 300 MPa at 800 °C. When a remap increases the boost pressure, the head gets hotter, works in fatigue, sometimes distorts and eventually stops sealing.
SUPERTECH offers two versions here cut from Inconel, a superalloy built on nickel: it keeps 860 MPa at about 730 °C and 554 MPa at about 815 °C, a lead of close to 85 % over EV8 steel in the 800 °C range. Their stems are hollow and charged with sodium. Turning liquid from 97.8 °C, this metal sloshes with each lift and moves heat from the top of the valve into the stem, which then passes it to the guide. For a hard-worked turbo four-cylinder, this material keeps heads sound through track outing after track outing.
With the MCEVI-1401S-HS, the head diameter gains one millimetre, going from 28.5 to 29.5 mm. Gases are cleared towards the turbo more quickly, which frees room for fresh air and brings extra power. The exhaust valve seats in the head then need machining to this new size.
Exhaust valve technical specifications
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| MCEVI-1400S-HS-8 | SUPERTECH | Standard | 28.5 mm | 6 mm | 100.1 mm | 1 | Sodium filled Inconel |
| MCEVI-1401S-HS-8 | SUPERTECH | +1 mm | 29.5 mm | 6 mm | 100.1 mm | 1 | Sodium filled Inconel |
The KPR-6S/7 collets are fitted with the original retainers and springs.
Valve fitting
| Part | BMW original | Reinforced |
|---|---|---|
| Collets | 11 34 1 461 405 (3 grooves) | KPR-6S-7 (single groove) |
| Valve stem seals | 11 34 0 035 853 | VSI-BM60-E-8 (exhaust) |
| Valve guide | GDE-BMB48-E6 |
Both part numbers have a single groove; they are fitted with KPR-6S/7 exhaust collets and VSI-BM60-E valve stem seals.
The MCEVI-1400S-HS keeps the 28.5 mm head and the seats as they are; the 29.5 mm MCEVI-1401S-HS requires the exhaust seats to be cut.
The set of 8 matches the 8 exhaust valves of a four-cylinder.
Technical guide
Our brand
| SUPERTECH Performance, a Silicon Valley company, has spent over 30 years refining titanium retainers, guides, racing valves and springs. Each part, whether stainless steel, titanium or Inconel, answers a given engine and earns its stripes with respected circuit, rally and drag racing tuners. |
How to choose
Seated beneath the retainer, the collets settle into the groove cut on the stem, holding the valve in position. Both versions offered for these BMW engines have just one: the decision rests above all on head diameter.
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Standard, 28.5 mm MCEVI-1400S-HS: suits a cylinder head that still has its factory exhaust valve seats, never recut. No machining is planned, a contact check is enough before fitting the brand new valves. |
+1 mm, 29.5 mm MCEVI-1401S-HS: with a bigger head, burnt gases escape towards the turbine sooner, the cylinder scavenges better and takes in more fresh air, which serves power. Plan on cutting the seats to this size before the engine is reassembled. |
| Grooves | Single groove MCEVI-1400S-HS: gripping the stem with their wider contact, the KPR-6S-7 collets unload the groove and cut friction. A sodium filled Inconel version, made for forced induction, which fits with the BMW retainers and springs. |
Single groove MCEVI-1401S-HS: single groove too, with the same KPR-6S-7 collets, essential and ideally new. It carries over the sodium filled Inconel and the 100.1 mm length of the standard version, only the head changes. |
When reinforced valves become necessary
- Remap and raised boost pressure (sodium filled Inconel versions)
- Fitting a bigger or hybrid turbo
- Sharper cam profiles or stiffer springs
- Frequent track outings or racing entry
- Original valves marked or no longer sealing at rebuild
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| 120i (F20 / F21) | B48B20A | 184 hp | 2016- |
| 125i (F20 / F21) | B48B20B | 224 hp | 2015- |
| 220i (F22 / F87) | B48B20A | 184 hp | 2015-2021 |
| 230i (F22 / F87) | B48B20B | 252 hp | 2016-2021 |
| 320i (F30) | B48B20A | 184 hp | 2015-2018 |
| 330i (F30) | B48B20B | 252 hp | 2015-2018 |
| 420i (F32 / F82) | B48B20A | 184 hp | 2016-2020 |
| 430i (F32 / F82) | B48B20B | 252 hp | 2016-2020 |
| 520i (G30) | B48B20 | 163-211 hp | 2017- |
| 530i (G30) | B48B20B | 252 hp | 2016-2020 |
| 320i (G20) | B48B20A / B48B20B | 184 hp | 2019- |
| 330i (G20) | B48B20B | 258 hp | 2018- |
| 330i (G20) | B48B20B | 245 hp | 2022- |
| 220i (G42) | B48B20A | 184 hp | 2021- |
| 230i (G42) | B48B20B | 245 hp | 2021- |
| 420i (G22) | B48B20A | 184 hp | 2020- |
| 430i (G22) | B48B20B | 245-258 hp | 2020- |
| Z4 20i (G29) | B48B20B | 163-197 hp | 2018- |
| Z4 30i (G29) | B48B20B | 258 hp | 2018- |
OEM part number (exhaust valve): 11 34 8 621 264
Don't forget the inlet valves
B48 or B46 head on the bench: use the occasion to change the inlet valves too and rebuild with a fresh valvetrain. Reference planned for these engines:
| Inlet valves BMW B48B20 → |
-
Brand
-
ReferenceMCEVI-1400S-HS-8