- In stock
Reinforced inlet valves BMW B48B20 B48A20 B46B20 B46A20
Set of 8 reinforced inlet valves for BMW B48 and B46 2.0 turbo (1 to 7 Series, X1 to X6, Z4).
- Brand: SUPERTECH
- Engines: B48A20, B48B20, B46A20, B46B20
- Dimensions: 30.1 mm head, 5 mm stem
- Material: black nitride stainless steel, single groove
BMW engines covered
The B48 and B46 are BMW's 2.0 litre (1,998 cc) turbocharged four-cylinder engines, with roller finger followers, hydraulic lash adjustment and Valvetronic variable lift on the inlet side. Fitted lengthways (B48B20, B46B20) or transversely (B48A20, B46A20), they have powered the 1 to 7 Series, the X1 to X6 and the Z4 since 2013, from 136 to 317 hp depending on version.
Their 8 inlet valves are BMW 11 34 7 633 699: 30.1 mm head, 5 mm stem, held by 11 34 1 438 142 collets. A remap that raises boost pressure exposes them to more heat and harder impacts.
SUPERTECH reinforced inlet valves
On a B48 pushed hard, every inlet valve runs through dozens of cycles per second to admit the air the turbo has squeezed; on each return the head knocks against its seat, while the stem keeps sweeping up and down its guide without respite. Heat-wise it endures 400 to 550 °C, a band in which ordinary factory-grade chrome-silicon material starts to falter: 500 MPa at 500 °C, then 250 MPa at 600 °C, half that figure. A taller cam profile, firmer springs, extra revs or extra boost: every increase adds to the blows, friction and heating.
SUPERTECH cuts these parts from a chrome-nickel stainless reserved for racing, close to EV8: it holds 650 MPa at 500 °C, 30 % above standard steel, and 550 MPa at 600 °C, 120 % above. A black nitride treatment finishes the surface, harder and slicker; the stem drags less and survives longer.
Dimensions do not move from the standard part: 30.1 mm head, 5 mm stem, one groove only. Fitting therefore calls for no recutting of the head's seats.
Inlet valve technical specification
| Part number | Brand | Size | Head Ø OEM 30.1 mm | Stem Ø OEM 5 mm | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| MCIVN-1400S-8 | SUPERTECH | Standard | 30.1 mm | 5 mm | 99.5 mm | 1 | Black nitride stainless steel |
MCIVN-1400S-8: dished head, to be fitted with KPR-5.0-7S collets.
Fitting details
| Part | BMW original | Reinforced |
|---|---|---|
| Valve collets | 11 34 1 438 142 | KPR-5.0-7S (1 groove) |
| Valve stem seals | Kit 11 34 0 038 719 | VSI-BM50-I-8 (inlet) |
| Valve guide |
The SUPERTECH valve has a single groove: it is fitted only with KPR-5.0-7S collets, never with the original ones.
The original size is kept: the inlet seats are checked and refreshed as usual during the cylinder head rebuild.
Clearance is taken up hydraulically: no adjustment is needed after replacing the valves.
Technical guide
The brand offered
| SUPERTECH, a Californian maker based in San Jose, has focused for over 30 years on racing valvetrain hardware. Each valve is studied engine by engine, checked with ultrasound, X-rays and then laser, before being proven by tuning shops, on circuits as much as at the drag strip. |
When reinforced valves become necessary
- Higher-lift cam or stiffer valve springs
- Red line moved up the rev range
- Bigger turbo or increased boost pressure
- Head redone with circuit, drift or rally in mind
- Stock valves pitted, tired or reground once
Compatible vehicles
| Model | Engine code | Power | Years |
|---|---|---|---|
| Série 1 120i (F20 / F21 / F40) | B46A20B / B48A20A / B48A20F / B48B20A | 178-192 hp | 2016- |
| Série 1 123 (F70) | B48A20P | 218 hp | 2024- |
| Série 1 125i (F20 / F21) | B48B20B | 224 hp | 2015-2019 |
| Série 1 128ti (F40) | B48A20B / B48A20E | 245-265 hp | 2020- |
| Série 1 M135 (F70) | B48A20H | 300-317 hp | 2024- |
| Série 1 M135i (F40) | B48A20E | 306 hp | 2019- |
| Série 2 218i (F22 / F23 / G42) | B48B20A | 136-156 hp | 2020- |
| Série 2 220i (F22 / F23 / G42) | B48B20A | 184 hp | 2015- |
| Série 2 225i (F22 / F23) | B48B20A | 184 hp | 2017-2021 |
| Série 2 230i (F22 / F23 / G42) | B46B20B / B48B20B | 245-258 hp | 2016- |
| Série 2 Active Tourer 220i (F45) | B48A20A / B48A20B / B48A20F | 163-192 hp | 2014-2021 |
| Série 2 Active Tourer 223i (U06) | B48A20P | 218 hp | 2021- |
| Série 2 Active Tourer 225i (F45) | B48A20B | 231 hp | 2013-2021 |
| Série 2 Gran Coupe 220i (F44) | B48A20A / B48A20F | 178-192 hp | 2020- |
| Série 2 Gran Coupe 223 (F74) | B48A20P | 218 hp | 2025- |
| Série 2 Gran Coupe 225i (F44) | B48A20A | 178 hp | 2023- |
| Série 2 Gran Coupe 228 (F74) | B48A20S | 245 hp | 2024- |
| Série 2 Gran Coupe 228i (F44) | B46A20B | 231 hp | 2019- |
| Série 2 Gran Coupe M235 (F74) | B48A20H | 301-317 hp | 2024- |
| Série 2 Gran Coupe M235i (F44) | B48A20E | 306 hp | 2019- |
| Série 2 Gran Tourer 220i (F46) | B48A20A / B48A20F | 163-192 hp | 2015- |
| Série 3 318i (G20 / G21) | B48B20A | 156 hp | 2020- |
| Série 3 320e (G20 / G21) | B48B20A | 204 hp | 2020- |
| Série 3 320i (F30 / F31 / G20 / G21) | B46B20B / B48B20A / B48B20B / B48B20S | 184-190 hp | 2015- |
| Série 3 330 (G20) | B48B20B | 255 hp | 2021- |
| Série 3 330e (F30 / G20 / G21) | B46B20B / B48B20A / B48B20B | 252-292 hp | 2015- |
| Série 3 330i (F30 / F31 / G20 / G21) | B46B20B / B48B20A / B48B20B / B48B20S | 245-258 hp | 2015- |
| Série 3 Gran Turismo 320i (F34) | B48B20A | 163-184 hp | 2016- |
| Série 3 Gran Turismo 330i (F34) | B46B20B / B48B20B | 249-252 hp | 2016- |
| Série 4 420i (F32 / F33 / G22 / G23) | B46B20B / B48B20A | 163-184 hp | 2016- |
| Série 4 425i (F32 / F33) | B48B20A | 184 hp | 2017-2020 |
| Série 4 430i (F32 / F33 / G22 / G23) | B46B20B / B48B20B / B48B20S | 245-258 hp | 2016- |
| Série 4 Gran Coupe 420i (F36 / G26) | B46B20B / B48B20A | 163-184 hp | 2016- |
| Série 4 Gran Coupe 425i (F36) | B48B20A | 184 hp | 2017-2020 |
| Série 4 Gran Coupe 430i (F36 / G26) | B46B20B / B48B20B / B48B20S | 245-258 hp | 2016- |
| Série 5 520e (G30 / G31) | B48B20A | 204 hp | 2021-2022 |
| Série 5 520i (G30 / G31 / G60 / G61) | B46B20B / B48B20A / B48B20B / B48B20P / B48B20S | 163-211 hp | 2017- |
| Série 5 525i (G60) | B48B20P | 190 hp | 2024- |
| Série 5 530e (G30 / G31) | B46B20B / B48B20A | 231-292 hp | 2017- |
| Série 5 530e (G30 / G60 / G61) | B46B20B / B48B20A / B48B20V | 252-299 hp | 2017- |
| Série 5 530i (G30 / G31 / G60) | B46B20B / B48B20B / B48B20S | 245-258 hp | 2016- |
| Série 6 Gran Turismo 630i (G32) | B48B20B | 245-258 hp | 2017- |
| Série 7 730i (G11) | B48B20B | 249-265 hp | 2015-2022 |
| Série 7 740e (G11) | B48B20B | 326 hp | 2016-2019 |
| X1 20i (F48 / U11) | B48A20A / B48A20B / B48A20F / B48A20P | 178-204 hp | 2015- |
| X1 20i ActiveFlex (F48) | B48A20A | 192 hp | 2015-2022 |
| X1 23i (U11) | B48A20P | 218 hp | 2022- |
| X1 25i (F48) | B46A20B / B48A20B | 231 hp | 2015-2021 |
| X1 25i ActiveFlex (F48) | B48A20B | 231 hp | 2016-2022 |
| X1 28i (F48 / U11) | B46A20B / B48A20P | 231-245 hp | 2014- |
| X1 M35i (U11) | B48A20H | 300-317 hp | 2023- |
| X2 20i (F39 / U10) | B46A20B / B48A20A / B48A20F / B48A20P | 178-204 hp | 2017- |
| X2 25i (U10) | B48A20P | 204 hp | 2023- |
| X2 28i (F39 / U10) | B46A20B / B48A20P | 231-245 hp | 2017- |
| X2 M35i (F39 / U10) | B48A20E / B48A20H | 300-317 hp | 2018- |
| X3 20 (G45) | B48B20P / B48B20S | 190-208 hp | 2024- |
| X3 20i (G01) | B46B20B / B48B20A / B48B20B | 184 hp | 2017- |
| X3 30 (G45) | B48B20S | 258 hp | 2024- |
| X3 30e (G01 / G45) | B46B20B / B48A20A / B48B20A / B48B20V | 272-299 hp | 2019- |
| X3 30i (G01) | B46B20B / B48B20B | 245-252 hp | 2017- |
| X4 20i (G02) | B46B20B / B48B20A | 184 hp | 2018- |
| X4 30i (G02) | B46B20B / B48B20B | 245-252 hp | 2018- |
| X5 30i (G05) | B48B20B | 265 hp | 2019-2021 |
| X6 30i (G06) | B48B20B / B48B20S | 245-265 hp | 2019- |
| Z4 20i (G29) | B46B20B / B48B20B | 163-197 hp | 2018- |
| Z4 30i (G29) | B46B20B / B48B20B | 258 hp | 2018- |
OEM part number (inlet valve): 11 34 7 633 699
Related products
On a refreshed B48 head, the exhaust side deserves the same care as the inlet, in the same strip-down. The matching exhaust valves are here:
| BMW B48B20 B48A20 B46A20 exhaust valves → |
-
Brand
-
ReferenceMCIVN-1400S-8