- On order
Reinforced exhaust valves BMW N53B30
Set of 12 reinforced exhaust valves for BMW N53B30.
- Brand: SUPERTECH
- Engine: N53B30 (325i, 330i, 523i, 525i, 528i, 530i, 630i)
- Dimensions: 29 mm head, 6 mm stem
- Material: sodium filled Inconel, single groove
BMW engines covered
The N53B30 is the naturally aspirated 3.0 litre straight six that BMW built from 2006 to 2013, with direct injection and without Valvetronic. It sits under the bonnet of the 325i and 330i E90 to E93, the 525i and 530i E60 / E61, the 523i, 528i and 530i F10 / F11, and the 630i E63 / E64.
All of its valves are worked by 11 33 7 559 797 roller finger followers with hydraulic lash adjustment. The 12 BMW 11 34 7 552 953 exhaust valves have a 29.0 mm head, a 6 mm stem and an overall length of 114.6 mm; three grooves locate them in the 11 34 1 461 405 collets. Long runs at full load and track sessions keep them in contact with very hot gases.
SUPERTECH reinforced exhaust valves
When it opens, the N53B30 exhaust valve lets the gases leaving combustion escape towards the manifold. On this naturally aspirated engine its head reaches 760 to 870 °C in the metal, where a turbocharged engine goes beyond 1,000 °C. Close to 75 % of that heat goes through the seat and about 20 % through the guide. Measured against an EV8 family steel, the original metal keeps only 300 MPa at 800 °C against 550 MPa at 600 °C: under heavy load the head runs too hot, tires, warps and finally stops sealing on its seat.
The SUPERTECH BMEVI-1053S is made of Inconel, a nickel based superalloy that retains 860 MPa around 730 °C and 554 MPa around 815 °C, roughly 85 % more than EV8 steel near 800 °C. Its hollow stem holds sodium: liquid from 97.8 °C, it moves with every lift and carries heat from the head towards the guide. A chrome coating protects the stem.
It keeps the BMW head diameter of 29 mm, with an overall length of 114.9 mm: the 12 exhaust seats do not have to be cut to another size, checking them during the rebuild is enough. Because it has a single groove, though, it needs KPR-6S-7 collets in place of the BMW 3 groove collets.
Exhaust valve technical specifications
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| BMEVI-1053S*12 | SUPERTECH | Standard | 29 mm | 6 mm | 114.9 mm | 1 | Sodium filled Inconel, chrome coated |
The BMEVI-1053S is fitted with KPR-6S-7 single groove collets and, for sealing, with VSI-BM60-E exhaust valve stem seals.
Valve fitting
| Part | BMW original | Reinforced |
|---|---|---|
| Collets | 11 34 1 461 405 (3 grooves) | KPR-6S-7 (single groove) |
| Valve stem seals | 11 34 0 035 853 | VSI-BM60-E-12 (exhaust) |
| Valve guide | Inner Ø 6.0 mm |
The BMW 3 groove collets do not suit the single groove stem of the BMEVI-1053S: they give way to KPR-6S-7 collets, fitted new.
The head measures 29 mm as standard: the exhaust seats, cut at 45°, are simply checked when the cylinder head is reconditioned.
For sealing, VSI-BM60-E exhaust valve stem seals replace the BMW 11 34 0 035 853 seals.
Technical guide
Our brand
| SUPERTECH Performance has spent around thirty years in California designing valvetrain parts for motorsport: valves, springs, guides and titanium retainers. Each valve is drawn up for one engine, in stainless steel, titanium or Inconel, then refined with tuners racing on circuits, rallies and drag strips. |
How to choose
For the N53B30, the SUPERTECH range holds just one exhaust valve: the sodium filled Inconel BMEVI-1053S, using the 29 mm BMW head with one single groove. What remains is to match it to your use and order the right collets:
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Standard, 29 mm BMEVI-1053S: the 12 exhaust seats keep their diameter, with no recutting to another size. |
|
| Grooves | Single groove KPR-6S-7 collets replacing the BMW 3 groove collets, to include in the same order. |
When reinforced valves become necessary
- Adding a supercharger or turbo (sodium filled Inconel version, the sole option)
- Higher lift camshafts or stiffer springs
- Track days in a 330i or 530i at sustained high rpm
- Rebuild of a high mileage head
- Pitted or burnt exhaust valves found at strip down
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| 325i / 325xi (E90 / E91 / E92 / E93) | N53B30A | 211 / 218 hp | 2006-2013 |
| 330i / 330xi (E90 / E91 / E92 / E93) | N53B30A | 272 hp | 2006-2013 |
| 525i / 525xi (E60 / E61) | N53B30A | 218 hp | 2006-2010 |
| 530i / 530xi (E60 / E61) | N53B30A | 272 hp | 2006-2010 |
| 523i (F10 / F11) | N53B30A | 204 hp | 2009-2013 |
| 528i (F10 / F11) | N53B30A | 258 hp | 2009-2013 |
| 530i (F10 / F11) | N53B30A | 272 hp | 2009-2013 |
| 630i (E63 / E64) | N53B30A | 272 hp | 2007-2010 |
OEM part number (exhaust valve): 11 34 7 552 953
Don't forget the inlet valves
Is the N53B30 cylinder head off? Then it is the right moment to renew its inlet valves too, which we offer for this straight six on the following page:
| Inlet valves BMW N53B30 → |
-
Brand
-
ReferenceBMEVI-1053S*12