Skip to content
  • On order
Reinforced exhaust valves Ford 2.0 EcoBoost Reinforced exhaust valves Ford 2.0 EcoBoost

Reinforced exhaust valves Ford 2.0 EcoBoost

€530.69 (tax incl.)
€663.36 (tax incl.) -20%

Set of 8 reinforced exhaust valves for the Ford 2.0 EcoBoost.

  • Brand: SUPERTECH
  • Engine: 2.0 EcoBoost (Focus III ST, Mondeo, Kuga, S-MAX, Galaxy)
  • Dimensions: 28 mm head, 5.45 mm stem
  • Material: sodium filled Inconel, single groove
FEVI-2500F-HS-8
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

Ford engines covered

The 2.0 EcoBoost is the direct injection turbocharged four-cylinder that Ford fits to the Focus III ST, the Mondeo IV and V, the Kuga II and III, the S-MAX and the Galaxy, under many codes of the R9C, R9M, TNC, TNW, TPBA and TPWA families.

Its cylinder head takes 8 exhaust valves, two per cylinder. The SUPERTECH version keeps standard size: a 28 mm flat head, a 5.45 mm stem, a 104.6 mm length and a single lock groove.

SUPERTECH reinforced exhaust valves

In the 2.0 EcoBoost four-cylinder, each cylinder has two exhaust valves sitting right ahead of the turbine: their head takes gases that drive it past 1,000 °C under boost, whereas a naturally aspirated engine caps it at 760 to 870 °C. Most of that flow, close to 75 %, reaches the head casting through contact with the seat, and around 20 % travels down the stem into the guide. EV8 steel, the benchmark for stock parts, offers only 300 MPa near 800 °C after 550 MPa near 600 °C: an overstressed head wears, buckles and seals poorly.

The FEVI-2500F-HS-8 combines two answers to that heat. Its Inconel body, a nickel alloy intended for extreme temperatures, keeps 860 MPa at 732 °C and 554 MPa at 816 °C, around 85 % better than EV8 steel close to 800 °C. Inside its hollowed stem sits sodium, liquid from 97.8 °C, which carries heat from the head to the stem and on to the guide with every valve movement.

It keeps the stock size: a flat 28 mm head, a 5.45 mm stem, an overall length of 104.6 mm and one groove. The exhaust seats keep their factory diameter; careful refacing gives them a continuous contact band. A sodium-filled valve is never cut or drilled, even when worn out.

Exhaust valve technical specifications

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
FEVI-2500F-HS-8 SUPERTECH Standard 28.0 mm 5.45 mm 104.6 mm 1 Sodium filled Inconel

A single part number, at standard size: 28 mm flat head, single lock groove, hollow sodium filled stem.

Valve fitting

PartFord originalReinforced
Collets
Valve stem seals
Valve guide

On reassembly, check that the collets sit properly in the single groove of the valve.

With the head staying at 28 mm, the exhaust seats are simply reground at standard size.

A sodium filled valve is never drilled or cut: in contact with water, sodium gives off hydrogen and caustic soda.

Technical guide

Our brand

SUPERTECH SUPERTECH, a Silicon Valley company, has been developing racing valves for more than thirty years, alongside springs, guides and titanium retainers. Inconel, stainless or titanium alike, every part answers a given engine and goes through the test of drag strips, rallies and race tracks.

How to choose

Held by the retainer, the two collets bite into the single stem groove and lock the valve in position. The 2.0 EcoBoost has one version only: the choice concerns the condition of the eight seats and the planned build.

CriterionOption 1Option 2
Size Standard, 28 mm head
For seats still at their factory size: light refacing restores a regular contact band. Also check, at each guide, how much play the 5.45 mm stem has before reassembly.
Material Sodium-filled Inconel, 1 groove
Nickel alloy and sodium-cooled stem: the version suited to a remapped 2.0 EcoBoost or one running a larger turbocharger. Plan collets in good condition and fresh stem seals.

When reinforced valves become necessary

  • Boost raised through remapping (Inconel already chosen here)
  • Larger turbocharger or bigger intercooler fitted
  • Sharper camshafts or firmer valve springs
  • Regular track driving with the Focus ST
  • Head rebuilt after marked exhaust valves

Vehicle compatibility

ModelEngine codePowerYears
Focus III 2.0 ST R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2012-2017
Galaxy II (WA6) 2.0 EcoBoost R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2010-2015
Galaxy III (CK) 2.0 EcoBoost R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2015-2023
Kuga II (DM2) 2.0 EcoBoost R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2012-
Kuga III (DFK) 2.0 EcoBoost R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2019-
Mondeo IV (BA7) 2.0 EcoBoost R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2010-2015
Mondeo IV Turnier (BA7) 2.0 EcoBoost R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2010-2015
Mondeo V (CD) 2.0 EcoBoost R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2012-2022
Mondeo V (CE) 2.0 EcoBoost R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2014-2022
Mondeo V Turnier (CF) 2.0 EcoBoost R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2014-2022
S-MAX (WA6) 2.0 EcoBoost R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2010-2014
S-MAX (CJ, WA6) 2.0 EcoBoost R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2015-2023
Ford Australia Escape (ZG) 2.0 AWD R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2016-2020
Ford Australia Falcon (FG) 2.0 EcoBoost XT R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2012-2014
Ford Australia Falcon (FG X) 2.0 i R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2014-2016
Ford Australia Kuga (TF) 2.0 EcoBoost AWD R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2014-2016
Ford Australia Mondeo (MD) 2.0 EcoBoost R9CB / R9CD / R9CF / R9CH / R9CI / R9MA / R9MB / R9MC / TNCA / TNCB / TNCC / TNCD / TNCF / TNWA / TNWB / TPBA / TPWA 2014-

OEM part number (exhaust valve):

Important: one set of 8 covers a complete engine. This page only covers the 2.0 EcoBoost codes listed; the naturally aspirated 2.0 Duratec and the 2.3 EcoBoost have their own valves.

Don't forget the inlet valves

With the 2.0 EcoBoost head dismantled, be sure to swap the inlet valves too, plus each stem seal: the valvetrain will start again on sound foundations.

4 other products in the same category

Viewed products

Loading...