- On order
Reinforced inlet valves MAZDA MX-5 B6 1.6
Set of 8 reinforced inlet valves for MAZDA MX-5 B6 1.6.
- Brand: SUPERTECH
- Engines: B6ZE, B64F, B6MC, B6MU, B6GP, 8AN1 1.6 16V
- Dimensions: 31 mm or 32 mm head, 5.96 mm stem, 105.35 mm long
- Material: black nitride stainless steel, high flow or standard flow
MAZDA engines covered
Mazda designed the B6, a 1.6-litre four-cylinder with twin overhead camshafts and 16 valves. It powers the first-generation MX-5 (NA) from 1989 to 1998, including the turbocharged B6GP of the early 1990s, then the second generation (NB) up to 2005, with outputs from 90 to 150 hp.
Its cylinder head carries 8 inlet valves, two per cylinder. Sharper cams, a raised rev limit or an added turbocharger subject them to impacts and heat the standard part was never drawn to absorb.
SUPERTECH reinforced inlet valves
Opened by the cam, the inlet valve lets fresh air in, then slams closed against the seat and rubs constantly against its guide. It runs between 400 and 550 °C, temperatures at which ordinary chrome-silicon steel gives way: 500 MPa at 500 °C, but only 250 MPa at 600 °C, a 50 % loss of strength. A tuned engine adds to each of these loads.
SUPERTECH machines them from stainless steel and then applies a black nitride treatment: this hard layer protects the stem against galling and slows its wear in the guide. Two designs exist at the factory size, one aimed at high flow, the other with standard flow and a dished head.
The +1 mm version takes the head from 31 to 32 mm while keeping stem and length. The opening at the seat gets wider, the cylinder fills better and output rises with it, as long as the 8 inlet seats are recut to that diameter.
Inlet valve technical specification
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| MAIVN-1100-2-8 | SUPERTECH | Standard | 31 mm | 5.96 mm | 105.35 mm | Black nitrided stainless steel | |
| MAIVN-1100-8 | SUPERTECH | Standard | 31 mm | 5.96 mm | 105.35 mm | Black nitrided stainless steel | |
| MAIVN-1102-8 | SUPERTECH | +1 mm | 32 mm | 5.96 mm | 105.35 mm | Black nitrided stainless steel |
MAIVN-1100-2-8: standard flow, dished head. MAIVN-1100-8 and MAIVN-1102-8: high flow; MAIVN-1102-8 has a dished head, thinned under the head and profiled on the back.
Fitting details
| Part | MAZDA original | Reinforced |
|---|---|---|
| Collets | ||
| Valve stem seals | VS-TS6I-8 | |
| Valve guide |
The VS-TS6I-8 inlet valve stem seals are made for the 6 mm stem of the B6 valves.
With a 31 mm head the inlet seats stay at factory size; with 32 mm the workshop recuts all 8 seats before reassembly.
Technical guide
The brand offered
| From its Californian base, SUPERTECH Performance has worked for three decades on motorsport valvetrain parts: valves, springs, guides. Every batch goes under ultrasound, X-rays and a laser beam before joining the workshops of the engine builders who rely on it. |
How to choose
The groove is the slot at the stem tip where the collets sit under the upper retainer. On the B6, two criteria decide: head size and design.
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Standard, 31 mm Seats keep their factory dimension. MAIVN-1100-8, MAIVN-1100-2-8. |
+1 mm, 32 mm Around 10 to 12 cfm gained per mm of head, seats recut; also useful when seats were already reworked. MAIVN-1102-8. |
| Design | High flow MAIVN-1100-8 at 31 mm, MAIVN-1102-8 at 32 mm. |
Standard flow Dished head, 31 mm. MAIVN-1100-2-8. |
When reinforced valves become necessary
- Wilder camshafts and stiffer springs
- Red line raised by modified engine management
- Forced induction fitted to the B6
- Head redone for track days or rallying
- Worn Mazda valves, seats already recut during a rebuild
Compatible vehicles
| Model | Engine code | Power | Years |
|---|---|---|---|
| MX-5 I (NA) 1.6 | B6ZE | 106 hp | 1989-1993 |
| MX-5 I (NA) 1.6 (NA6C) | B6ZE / B64F | 115 hp | 1990-1994 |
| MX-5 I (NA) 1.6 (NA6C) | 8AN1 | 90 hp | 1995-1998 |
| MX-5 I (NA) 1.6 Turbo | B6GP | 150 hp | 1990-1992 |
| MX-5 II (NB) 1.6 (NB6C) | B6ZE | 120-125 hp | 1998-2005 |
| MX-5 II (NB) 1.6 16V (NB6C) | B6MC / B6MU | 110 hp | 1998-2005 |
Don't forget the exhaust valves
With the B6 head removed, it is the right time to replace the 8 exhaust valves and the inlet valve stem seals as well, both offered here:
| MAZDA MX-5 1.6 B6 exhaust valves → |
| MAZDA MX-5 323 B6 BP inlet valve stem seals → |
-
Brand
-
ReferenceMAIVN-1100-2-8