- On order
Reinforced exhaust valves Mazda MX-5 1.8 BP
Set of 8 reinforced exhaust valves for the Mazda MX-5 1.8 BP.
- Brand: SUPERTECH
- Engines: BP, BP-ZE, BPF1, BPD, BP5A, BP6J, BP4W, BP8K, BP Turbo (MX-5 NA and NB 1.8)
- Dimensions: 28 mm or 29 mm head, 5.94 mm stem
- Material: black nitrided stainless steel or Inconel
Mazda engines covered
The BP is Mazda's 1.8 litre, 16-valve, twin overhead camshaft four-cylinder, fitted to the MX-5 NA 1.8 from 1993 and then to the whole NB 1.8 range until 2005, turbo versions included.
Its 8 exhaust valves, two per cylinder, have a 5.94 mm stem; on the turbo versions they receive hotter, pressurised gases.
SUPERTECH reinforced exhaust valves
On the BP of the 1.8 MX-5, the exhaust head metal reaches 760 to 870 °C in naturally aspirated form and crosses 1,000 °C once the block is boosted. Some 75 % of this thermal energy passes through the seat, close to 20 % through the guide. Measured at 600 °C, EV8 steel shows 550 MPa; at 800 °C it keeps only 300: the head heats up, fatigues, deforms and sealing degrades.
SUPERTECH offers two materials for this block. The first, a heat resistant stainless steel whose black nitriding hardens the stem, targets tuned naturally aspirated BPs. The second, Inconel, a nickel superalloy, holds 860 MPa at 732 °C and 554 MPa at 816 °C, around 85 % better than EV8 steel near 800 °C: it is the one to fit on a turbo or supercharged BP.
The 1206 part numbers reuse the 1204 stem and overall length, with a head taken from 28 to 29 mm. This extra millimetre speeds up gas evacuation, cleans up cylinder scavenging and frees power, and calls for exhaust seats machined to suit.
Exhaust valve technical specifications
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| MAEVN-1204-8 | SUPERTECH | Standard | 28.0 mm | 5.94 mm | 102.0 mm | Black nitrided stainless steel | |
| MAEVN-1206-8 | SUPERTECH | +1 mm | 29.0 mm | 5.94 mm | 102.0 mm | Black nitrided stainless steel | |
| MAEVI-1204-8 | SUPERTECH | Standard | 28.0 mm | 5.94 mm | 102.0 mm | Inconel | |
| MAEVI-1206-8 | SUPERTECH | +1 mm | 29.0 mm | 5.94 mm | 102.0 mm | Inconel |
The four part numbers share the 5.94 mm stem and the 102.0 mm length; they differ by head and material.
Valve fitting
| Part | Mazda original | Reinforced |
|---|---|---|
| Collets | ||
| Valve stem seals | ||
| Valve guide |
Before releasing the springs, check that the original collets engage properly in the groove of the new valves.
Check the guide clearance with the 5.94 mm stem: a worn guide wears the valve and lets oil through.
The exhaust seats are reground during the rebuild; with a 29 mm head, they are machined to that size.
Technical guide
Our brand
| SUPERTECH Performance has been designing cylinder head parts cut out for competition in the United States for more than 30 years. The BP gets a dedicated exhaust valve from the brand, in black nitrided stainless steel or Inconel, each available with the 28 mm original head and with a 29 mm head. |
How to choose
All four part numbers share the same stem, the same groove for the collets that hold the upper retainer and the same length. Settle the material first according to how the engine is used, then the size:
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | MAEVN-1204-8 / MAEVI-1204-8 28 mm head, original size: the seats keep their diameter. |
MAEVN-1206-8 / MAEVI-1206-8 29 mm head, 1 mm larger: exhaust seats to be machined. |
| Material | MAEVN Black nitrided stainless steel, for a tuned naturally aspirated BP. |
MAEVI Inconel, the version to pick on a turbo or supercharged BP. |
When reinforced valves become necessary
- Turbo or supercharger fitted on the BP (Inconel version advised)
- Camshafts sharper than the standard ones
- Track days, rally or hill climb outings
- Engine management remapped for more power
- Head rebuild revealing marked exhaust valves
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| MX-5 I (NA) 1.8 (NA8C) | BP / BP-ZE / BPF1 | 130 hp | 1993-1998 |
| MX-5 I (NA) 1.8 (NA8C) | BPF1 | 131 hp | 1993-1997 |
| MX-5 I (NA) 1.8 | BP-ZE | 135 hp | 1997-1998 |
| MX-5 II (NB) 1.8 | BPD | 141 hp | 1998-2000 |
| MX-5 II (NB) 1.8 (NB8C) | BP5A / BP6J | 140 hp | 1998-2002 |
| MX-5 II (NB) 1.8 16V (NB8C) | BP5A / BP6J | 140 hp | 1998-2005 |
| MX-5 II (NB) 1.8 16V (NB8C) | BP-ZE / BP6J | 146 hp | 2000-2005 |
| MX-5 II (NB) 1.8 16V (NB8C) | BP6J | 139 hp | 2000-2005 |
| MX-5 II (NB) 1.8 i Turbo | BP8K | 214 hp | 2002 |
| MX-5 II (NB) 1.8 i (NB8C) | BP4W | 154 hp | 2002-2005 |
| MX-5 II (NB) 1.8 i Turbo | BP Turbo / BP8K | 185 hp | 2002-2005 |
| MX-5 II (NB) 1.8 (NB8C) | BP6J | 146 hp | 2002-2005 |
| MX-5 II (NB) 1.8 SE i Turbo | BP Turbo | 165 hp | 2003-2005 |
OEM part number (exhaust valve):
Don't forget the inlet valves
Once the BP cylinder head is off, make use of the access to equip the inlet side with new valves and fresh stem seals too. Products to look at below:
| Inlet valves Mazda MX-5 323 BP 1.8 → |
| Exhaust valve guides Mazda BP 1.8 16V → |
-
Brand
-
ReferenceMAEVN-1204-8