Skip to content
  • On order
Reinforced exhaust valves VW Golf 2 Corrado Scirocco 1.8 16V KR 2.0 16V 9A Reinforced exhaust valves VW Golf 2 Corrado Scirocco 1.8 16V KR 2.0 16V 9A

Reinforced exhaust valves VW Golf 2 Corrado Scirocco 1.8 16V KR 2.0 16V 9A

€235.90 (tax incl.)
€294.88 (tax incl.) -20%

Set of 8 reinforced exhaust valves for the VW 1.8 16V KR and 2.0 16V 9A.

  • Brand: SUPERTECH
  • Engines: KR (Golf 2 GTI 16V, Corrado, Scirocco 2), 9A (Corrado)
  • Dimensions: 28.0 mm head (standard), 28.5 or 29.5 mm, 7 mm stem
  • Material: nitrided stainless steel, EV16 stainless steel, Inconel or sodium filled Nimonic
VWEVN-1034-8 (170190)
For larger quantities, 5 to 15 days lead time
Pay in installments

VW engines covered

Volkswagen first fitted the 1.8 16V KR to the Scirocco II, the Golf II GTI 16V and the Corrado, with 136 to 139 hp depending on the version, then the 136 hp 2.0 16V 9A to the Corrado from 1991 to 1995. Both naturally aspirated four-cylinders have four valves per cylinder.

Each one therefore has 8 exhaust valves. At standard size, the valves of this page have a 28.0 mm head, a 7 mm stem and a 98.2 mm length. These are the valves that take the extra heat when the engine is tuned.

SUPERTECH reinforced exhaust valves

On the KR and 9A, naturally aspirated four-cylinders, the exhaust head metal runs between 760 and 870 °C; adding a turbo or a supercharger takes it beyond 1,000 °C. Cooling happens through contact: close to 75 % of the heat via the seat, 20 % via the guide. Referred to the EV8 family, the original steel falls from 550 MPa at 600 °C to 300 MPa at 800 °C. Once that limit is passed, the head tires, warps and the valve ends up leaking as it closes.

For these engines SUPERTECH offers four materials: black nitrided stainless steel on the VWEVN-1034, whose hardened, smooth surface limits stem wear, EV16 stainless steel on the VWEVN-1035, Inconel on the VWEVI-1034F, VWEVI-1035 and VWEVI-1037, and Nimonic on the VWEVI-1035-HS, with a hollow sodium filled stem. Inconel, a nickel superalloy, still holds 860 MPa near 730 °C and 554 MPa near 815 °C, about 85 % better than EV8 around 800 °C: it becomes the obvious pick once a turbo or supercharger is involved. The sodium, fluid from 97.8 °C, helps the head shed its heat towards the stem.

Three references enlarge the head: the VWEVN-1035, VWEVI-1035 and VWEVI-1035-HS go to 28.5 mm (+0.5 mm), the VWEVI-1037 to 29.5 mm (+1.5 mm). Burnt gases are cleared sooner, fresh air gets in better and power rises. These versions call for exhaust valve seats recut to their diameter. All keep the 7 mm stem and 98.2 mm length shared by the six references.

Exhaust valve technical specifications

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
VWEVN-1034-8 SUPERTECH Standard 28.0 mm 7 mm 98.2 mm 1 Black nitrided stainless steel
VWEVI-1034F-8 SUPERTECH Standard 28.0 mm 7 mm 98.2 mm 1 Inconel
VWEVN-1035-8 SUPERTECH +0.5 mm 28.5 mm 7 mm 98.2 mm 1 EV16 stainless steel
VWEVI-1035-8 SUPERTECH +0.5 mm 28.5 mm 7 mm 98.2 mm 1 Inconel
VWEVI-1035-HS-8 SUPERTECH +0.5 mm 28.5 mm 7 mm 98.2 mm 1 Sodium filled Nimonic
VWEVI-1037-8 SUPERTECH +1.5 mm 29.5 mm 7 mm 98.2 mm 1 Inconel

Valve fitting

PartVW originalReinforced
Collets KPR-VW7-S (single groove)
Valve stem seals VS-VW7E-8 (exhaust)
Valve guide GDE-VW8V-7A

These single groove valves are fitted with KPR-VW7-S collets.

The VWEVN-1034 and VWEVI-1034F fit seats as they are; with a 28.5 or 29.5 mm head, the 8 exhaust seats are recut to size.

Their 7 mm stem diameter is common to the six part numbers on this page.

Technical guide

Our brand

SUPERTECH SUPERTECH Performance has created competition valves, plus springs, guides and titanium retainers, at the heart of Silicon Valley for over three decades. Whatever the material (Inconel, titanium, stainless steel), every valve starts from a precise engine and is proven with renowned drag, rally and circuit tuners.

How to choose

Two criteria guide the choice: the size, which decides whether the seats must be machined, then the material, which depends on the use. All these valves have a single groove and fit with KPR-VW7-S collets:

CriterionOption 1Option 2
Size Standard, 28.0 mm
VWEVN-1034 and VWEVI-1034F: for a cylinder head with intact exhaust valve seats, no machining, a simple check at reassembly. The right choice for a KR or 9A close to stock.
+0.5 or +1.5 mm, 28.5 or 29.5 mm
VWEVN-1035, VWEVI-1035, VWEVI-1035-HS and VWEVI-1037: larger head, faster exit of burnt gases and better filling, which helps power. Exhaust valve seats need cutting to the chosen diameter before reassembly.
Material Stainless steel
VWEVN-1034 in black nitrided stainless steel, with a hardened surface that slows wear against the guide, or VWEVN-1035 in EV16 stainless steel. Suits a tuned naturally aspirated engine used on the road or for the odd track outing.
Inconel or sodium filled Nimonic
VWEVI-1034F, VWEVI-1035 and VWEVI-1037 in Inconel, VWEVI-1035-HS in Nimonic with a sodium stem. Clearly higher hot strength: the versions to favour with a turbo, a supercharger or heavy circuit use.

When reinforced valves become necessary

  • Turbo or supercharger grafted onto the KR or 9A (Inconel version advised)
  • Sharper camshafts or new valve springs
  • Frequent track outings, autotests or hill climbs
  • Head rebuilt with tired or pitted exhaust valves
  • Seats enlarged to gain exhaust flow

Vehicle compatibility

ModelEngine codePowerYears
Golf II GTI 16V (19E) KR 136/139 hp 1986-1990
Scirocco II 1.8 16V (53B) KR 139 hp 1985-1989
Corrado 1.8 16V (53I) KR 136 hp 1989-1992
Corrado 2.0 16V (53I) 9A 136 hp 1991-1995

OEM part number (exhaust valve):

Important: one set of 8 covers a complete KR or 9A. The 2.0 16V ABF of the Golf III GTI 16V, with a 27 mm standard head, has its own page. The 1.8 16V PL is not covered by this page.

Don't forget the inlet valves

Before closing up the cylinder head of a KR or 9A, replace the inlet valves too for a completely new valvetrain. Here is the reference designed for these two engines:

Inlet valves VW 1.8 16V KR 2.0 16V 9A →

16 other products in the same category

Viewed products

Loading...