Skip to content
  • In stock
Trimetal connecting rod bearings Honda K20A2 K20Z1 K20C1 K24 Trimetal connecting rod bearings Honda K20A2 K20Z1 K20C1 K24

Trimetal connecting rod bearings Honda K20A2 K20Z1 K20C1 K24

€47.67 (tax incl.)
€52.97 (tax incl.) -10%

Set of 8 trimetal connecting rod half-bearings for the Honda K20 and K24.

  • Brands and treatments: ACL Race, ACL Calico and King Racing XPC
  • Compatibility: Civic Type R, Integra Type R, Accord, CR-V, Element, Odyssey
  • Engine codes: K20A2, K20Z1, K20C1, K24A1, K24A3, K24A4, K24A8, K24Z1
  • Available sizes: standard to +0.50 mm, increased-clearance versions (HX, STDX)
4B1972H-STD
284 in stock in Europe (72h lead time)
Pay in installments

The Honda K20 and K24 four-cylinder engines

The K20 and K24 are the 2.0 and 2.4 litre 16-valve twin overhead camshaft four-cylinder engines of Honda's K family: the K20A2 and K20Z1 of the Civic Type R EP3 and Integra DC5, the K24 of the Accord, CR-V, Element, Odyssey, Stepwgn, FR-V and Elysion, and the turbocharged K20C1 of the recent Civic Type R. ACL and King list a single bearing set for these engines: same crankpin diameter, a single set covers the family.

From the factory, this engine is fitted with standard production connecting rod bearings, sized for the loads of the original engine: as soon as power, engine speed or boost pressure increase, they reach their limits.

Trimetal connecting rod bearings

Three layers make up a trimetal bearing: the steel back for stiffness, the copper-lead intermediate layer for load capacity, then the anti-friction running layer that protects the crankpin. This set includes 8 half shells, that is 4 pairs.

Where an aluminium bi-metal bearing, designed for low to medium loads, withstands about 8,000 psi, a performance trimetal bearing goes up to 12,000 psi: 50% extra margin. That is what keeps it durable on an engine boosted by a turbo or supercharger, or pushed to high rpm.

Technical specifications

Fitment dimensions common to all references
ACL / King bearings
Crankpin Ø 47.980 / 48.000 mm (King: 47.981 / 48.001 mm)
Housing bore Ø 51.004 / 51.024 mm
Width 15.4 mm
ReferenceBrand and treatmentSizeWall thickness (mm)
4B1972H-STD ACL Race - Untreated Standard 1.500
4B1972HX-STD ACL Race - Untreated Std, increased clearance (HX) 1.487
4B1972H-.025 ACL Race - Untreated +0.025 1.513
4B1972H-.25 ACL Race - Untreated +0.25 1.625
4B1972HD-STD ACL Race - Untreated Standard, dowel hole
4B1972HXD-STD ACL Race - Untreated Std, increased clearance (HX), dowel hole
4B1972HD-.025 ACL Race - Untreated +0.025, dowel hole
4B1972HD-.25 ACL Race - Untreated +0.25, dowel hole
4B1972HC-STD ACL Race - Calico CT-1 Standard
4B1972HXC-STD ACL Race - Calico CT-1 Std, increased clearance (HX)
4B1972HC-.025 ACL Race - Calico CT-1 +0.025
4B1972HC-.25 ACL Race - Calico CT-1 +0.25
CR4542XPC King Racing - pMaxKote Standard 1.500
CR4542XPC STDX King Racing - pMaxKote Std, increased clearance (STDX) 1.487
CR4542XPC.026 King Racing - pMaxKote +0.026 1.513
CR4542XPC0.25 King Racing - pMaxKote +0.25 1.627
CR4542XPC0.5 King Racing - pMaxKote +0.50 1.754

The references ending in D (4B1972HD-STD, 4B1972HXD-STD, 4B1972HD-.025, 4B1972HD-.25) are the dowel-hole versions: the lower shell has a dowel hole that matches a dowel location on the connecting rod cap. Choose according to whether your connecting rod cap has a dowel or not.

Running clearance

Between the crankpin and the bearing there is a small gap, the running clearance, in which the oil film circulates.

In operation there is no metal-to-metal contact: the crankpin turns on this oil film, which supports the whole load. The clearance determines its thickness. A clearance that is too tight hinders oil flow, heats the assembly and promotes seizure; one that is too wide lets oil leak away, weakens the film and makes oil pressure drop. The correct clearance balances oil flow and film strength.

Size / gradeWhen to choose itACL Race SeriesKing XPC
Standard (STD) Standard journal, not reground 0.051 to 0.061 mm 0.048 mm - 0.061 mm
Increased clearance (HX / STDX) Wider clearance: high oil flow, high rpm 0.077 to 0.086 mm 0.073 mm - 0.086 mm
+0.025 / +0.026 mm Polished journal 0.051 to 0.061 mm 0.048 mm - 0.061 mm
+0.25 mm Journal reground to 0.25 mm 0.051 to 0.061 mm 0.048 mm - 0.061 mm
+0.50 mm Journal reground to 0.50 mm 0.048 mm - 0.061 mm

Checking on assembly: lay a calibrated strip (Plastigauge) on the journal, torque the rod cap to spec, then compare the crushed strip against the gauge to read the clearance.

Plastigauge

Order the Plastigauge →

Technical guide

Designed for engine building and motorsport, these ACL and King trimetal connecting rod bearings carry much more load than an original bearing, whether the engine gains power, revs higher or receives a turbo or supercharger. They are available in several sizes: the standard size, a +0.025 / +0.026 mm size for a crankpin that has only been polished, +0.25 and +0.50 mm regrind sizes and the HX / STDX version with increased clearance for high-revving engines or engines needing a high oil flow. That makes it possible to put a reground crankshaft back into service without changing range and to set the clearance for the oil and use.

The two brands

ACL ACL Bearing Company, an Australian manufacturer of high-performance engine bearings since 1949, offers with its Race Series precise trimetal bearings, available in many sizes and proven on built engines worldwide. Its Calico version (HC suffix) adds the CT-1 coating, a dry film lubricant that reduces friction and abrasive wear.
King Racing King Engine Bearings, an Israeli manufacturer of high-performance engine bearings since the 1960s, offers with its pMax Black trimetal alloy, coated with pMaxKote in the XPC version, bearings designed for heavy loads.

Construction and advantages

Criterion ACL Race Series King Racing
Cross-section Cross-section of an ACL Race Series trimetal bearing Cross-section of a King Racing trimetal bearing
Type High-performance trimetal bearing High-performance trimetal bearing
Country of manufacture Australia Israel
Construction Trimetal: steel back, copper layer, soft surface Trimetal: steel back, copper layer, soft surface
Alloy Race Series (copper-lead) pMax Black (hardened copper-lead)
Protective coating No (Race); Calico CT-1 (HC) Yes, pMaxKote: polymer coating on the surface that limits wear when lubrication drops (start-ups, thin oil film).
Available sizes Standard to +0.25 mm (+ increased clearance HX) Standard to +0.50 mm (+ increased clearance STDX)

Vehicle compatibility

This connecting rod bearing set fits the K20 and K24 four-cylinder engines of the following Honda models:

BrandModel (chassis)Engine codePowerYears
HONDA CR-V III (RE_) 2.4 i-VTEC / 2.4 i-VTEC 4WD K24A1, K24Z1 160–170 hp 2006–2012
HONDA ACCORD VII (CL, CN) 2.4 i 16V / 2.4 Vtec / 2.4 (CL9) K24A3, K24A4, K24A8 143–190 hp 2003–2008
HONDA CIVIC VII Hatchback (EU, EP, EV) 2.0 Type-R (EP3) K20A2 200 hp 2001–2005
HONDA INTEGRA Coupe (DC5) 2.0 Type-R / 2.0 Type-S / 2.0 (DC5) K20A2, K20Z1 200–220 hp 2002–2008
HONDA ACCORD VII Tourer (CM, CN) 2.4 (CM2) / 2.4 Vtec T K24A1, K24A3 190–200 hp 2003–2008
HONDA CR-V II (RD_) 2.4 / 2.4 Vtec / 2.4 4WD K24A1 152–162 hp 2001–2007
HONDA ACCORD VII (CM, UC) 2.4 Vtec E (CM5) K24A4, K24A8 160–170 hp 2002–2008
HONDA STEPWGN (LA-RF_, UA-RF_) 2.4 / 2.4 4WD K24A3 162 hp 2000–2005
HONDA STEPWGN (DBA-RG_) 2.4 Z FF / 2.4 Z FF 4WD K24A3 162 hp 2005–2009
HONDA ODYSSEY (RL1, RA6, RA_) 2.4 / 2.4 4WD K24A4 190 hp 2003–
HONDA ACCORD Coupe (CM) 2.4 (CM7) K24A4, K24A8 160–169 hp 2003–2008
HONDA ELEMENT (YH) 2.4 / 2.4 4WD K24A4, K24A8 158–169 hp 2002–2011
HONDA ELYSION (RR) 2.4 i-VTEC / 2.4 i-VTEC 4WD K24A1 160 hp 2004–
HONDA CIVIC IX (FK) 2.0 i-VTEC Type R (FK2) K20C1 310 hp 2015–2016
HONDA ODYSSEY (RL3, RL4, RB) 2.4 (RB3, RB1) K24A3 200 hp 2004–2008
HONDA CR-V IV (RM_) 2.4 i-VTEC / 2.4 i-VTEC 4WD K24A1 170–185 hp 2012–
HONDA FR-V (BE) 2.4 (BE8) K24A3 162 hp 2006–2011
HONDA CIVIC X Hatchback (FC_, FK_) 2.0 Type-R K20C1 306–320 hp 2017–
HONDA CIVIC XI Hatchback (FL) Type-R K20C1 300–330 hp 2022–

Why replace the bearings

When a connecting rod bearing gives way, the damage quickly spreads beyond the part itself: a scored crankpin, debris carried through the whole oil circuit, a crankshaft to regrind at the very least, sometimes a rod and block lost. A bearing set costs far less than a regrind and is nothing compared with a complete engine rebuild. It is the cheapest part of the rotating assembly, yet the one whose failure is most expensive.

16 other products in the same category

Viewed products

Loading...