Skip to content
  • On order
Exhaust valve guides bronze Honda S2000 F20C F22C Exhaust valve guides bronze Honda S2000 F20C F22C

Exhaust valve guides Honda S2000 F20C F22C

€54.30 (tax incl.)
€67.87 (tax incl.) -20%

Set of 8 exhaust valve guides for Honda S2000 F20C and F22C, 5.5 mm stem.

  • Brands: FERREA and SUPERTECH
  • Engines: F20C1, F20C3, F20CVTEC, F22C1
  • Materials: copper bronze, manganese bronze
  • Sizes: standard, +0.025 mm or standard with original centring
VG1056*8
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

Applicable Honda engines

This set equips the exhaust side of the naturally aspirated Honda S2000 engines: F20C1, F20C3 and F20CVTEC of 2.0 litres, F22C1 of 2.2 litres, whether the car is an AP1 or an AP2.

The 8 exhaust valves of the head each slide in a guide. On the F20C1, Honda sells this guide only as an oversize part, under reference 12011-PCX-010; the valve stem measures 5.5 mm and the factory clearance runs from 0.05 to 0.07 mm.

FERREA and SUPERTECH exhaust valve guides

The exhaust guide works in the hottest part of the head. It re-centres the stem on its seat, leads heat from the valve into the casting and bears the stem seal. Once it gives up, the valve rocks and seals badly, oil trickles into the exhaust port, blue smoke leaves the tailpipe and compression drops.

FERREA starts from a copper-based bronze made of American material and puts it through its own heat treatment, which the catalogue credits with better heat dissipation, good temperature stability, slower wear and a well-lubricated stem. Tight CNC machining tolerances let the guides run with titanium as well as stainless steel valves. These SUPERTECH guides are machined in manganese bronze, an alloy the brand says gets rid of heat noticeably better than stock sintered guides do. The set gathers 8 guides with a 5.5 mm bore, which is a full exhaust side for one head, and often goes in alongside uprated valves.

Valve guide technical specifications

Part numberBrandMaterialSizeStem Ø
OEM 5.5 mm
Outside ØLength
VG1056*8 FERREA Copper bronze Standard 5.5 mm
VG1057*8 FERREA Copper bronze +0.025 mm 5.5 mm
VG1092*8 FERREA Copper bronze Standard, original centring 5.5 mm
GDE-HS255-E-8 SUPERTECH Manganese bronze 5.5 mm 11.065 mm 41.6 mm

Valve guide installation

PartOriginalReinforced
Exhaust valve guide 12011-PCX-010 Replaced by the kit
Inlet valve guide 12010-PCX-000 Inlet guide kit
Stem seals 12210-PZ1-003 / 12211-PZ1-003 FERREA VS1002 / SUPERTECH VS-H5.5-E

Technical guide

Our brands

Ferrea Founded in 1978 and based in Fort Lauderdale, Florida, FERREA develops racing valves, guides, springs and valve seals, produced in its own factories in Florida and Argentina.
Supertech More than thirty years on, SUPERTECH still builds racing valve train parts in San Jose, where guides, valves and springs are calculated, then proven by engine builders.

Standard or oversize?

FERREA offers standard, with or without original centring, and +0.025 mm (0.001"). SUPERTECH gives no size: outside diameter 11.065 mm.

Manganese bronze

This copper alloy also contains manganese, aluminium and iron, plus a hint of zinc. Its hardness and its tolerance of wear and corrosion fit it for heavily stressed bushes, and an exhaust valve guide is exactly that, rubbed by the stem on every stroke.

When valve guides must be replaced

  • Oil leaking down the exhaust-side stems
  • Tired head receiving uprated valves
  • Competition engine with a head to rebuild
  • Valve train reset piece by piece, from end to end

Vehicle compatibility

ModelEngine codePowerYears
Honda S2000 (AP1) F20C1 / F20C3 / F20CVTEC 231-250 hp 1999-2009
Honda S2000 (AP2) F22C1 239-243 hp 2003-

OEM reference (exhaust valve guide): 12011-PCX-010 (F20C1, oversize)

Remember the inlet guides and valve stem seals

When guides change, stem seals follow: SUPERTECH references the VS-H5.5-E for the exhaust.

Inlet valve guides Honda S2000 F20C F22C →

16 other products in the same category

Viewed products

Loading...