Skip to content
  • On order
Reinforced head gasket Honda S2000 F20C F22C - C4626-030 Reinforced head gasket Honda S2000 F20C F22C - C4626-030

Reinforced head gasket Honda S2000 2.0 2.2 16V F20C F22C

€113.59 (tax incl.)
€151.45 (tax incl.) -25%

Reinforced Athena and Cometic head gasket, in MLS for F20C and F22C1. Sold individually.

  • Brands: Athena, Cometic
  • Engines: F20C1, F20C2, F22C1
  • Bores: 87.5 to 89 mm
  • Thicknesses: 0.69 to 3.56 mm
  • Replaces: 12251-PCX-004
C4626-030
0 in stock in France
ORDER TODAY, WE SHIP IN 3 WEEKS
Pay in installments

The Honda engines covered

The Honda F20C is the 2.0-litre 16-valve DOHC VTEC inline four-cylinder petrol engine of the Honda S2000; the F22C1 is its 2.2-litre version. This page covers the F20C1, F20C2 and F22C1: these engines take the same reinforced cylinder head gaskets.

The original gasket carries part number 12251-PCX-004. It is a multi-layer steel (MLS) gasket with a 88 mm bore, whose thickness Honda does not publish. It is sized for standard combustion pressure: when that pressure rises, clamping load drops, the cylinder head lifts, and coolant passes into a cylinder.

Reinforced cylinder head gaskets

A cylinder head gasket does not create the seal on its own: it holds because the fasteners clamp the head against the block. A composite gasket is crushed for good beyond 100 N/mm² of admissible stress, whereas the 301 stainless steel of the MLS gaskets withstands 517 N/mm², 5 times more, and springs back at every combustion.

This page brings together the part numbers from two racing manufacturers, Athena and Cometic, in two constructions: Athena MLS with Gas Stopper and Cometic MLS multi-layer steel. Gasket bores run from 87.5 to 89 mm, covering the standard block as well as the rebored block, and thicknesses from 0.69 to 3.56 mm, enough to adjust the compression ratio without touching the pistons or the cylinder head. As a rule, the gasket bore chosen is at least 0.5 mm larger than the actual cylinder bore. Each part number is sold individually, one gasket per engine.

Technical specifications

Gasket bore
OEM 88 mm
Thickness Gasket volume Gasket type
OEM MLS
Brand Part number
OEM 12251-PCX-004
87.5 mm 0.69 mm 4.15 MLS Cometic C4625-027
87.5 mm 0.76 mm 4.57 MLS Cometic C4625-030
87.5 mm 1.02 mm 6.13 MLS Cometic C4625-040
87.5 mm 1.14 mm 6.86 MLS Cometic C4625-045
87.5 mm 1.30 mm 7.82 MLS Cometic C4625-051
87.5 mm 1.52 mm 9.14 MLS Cometic C4625-060
87.5 mm 1.78 mm 10.70 MLS Cometic C4625-070
87.5 mm 2.03 mm 12.21 MLS Cometic C4625-080
88 mm 0.76 mm 4.62 MLS Cometic C4626-030
88 mm 1.02 mm 6.20 MLS Cometic C4626-040
88 mm 2.34 mm 14.23 MLS Cometic C4626-092
88 mm 3.05 mm 18.55 MLS Cometic C4626-120
88.5 mm 0.76 mm 4.68 MLS Cometic C4627-030
89 mm 0.69 mm 4.29 MLS Cometic C4335-027
89 mm 0.76 mm 4.73 MLS Cometic C4335-030
89 mm 0.85 mm 5.29 MLS Athena 338124R
89 mm 0.91 mm 5.66 MLS Cometic C4335-036
89 mm 1.02 mm 6.35 MLS Cometic C4335-040
89 mm 1.14 mm 7.09 MLS Cometic C4335-045
89 mm 1.30 mm 8.09 MLS Cometic C4335-051
89 mm 1.42 mm 8.83 MLS Cometic C4335-056
89 mm 1.52 mm 9.46 MLS Cometic C4335-060
89 mm 1.68 mm 10.45 MLS Cometic C4335-066
89 mm 1.78 mm 11.07 MLS Cometic C4335-070
89 mm 1.91 mm 11.88 MLS Cometic C4335-075
89 mm 2.03 mm 12.63 MLS Cometic C4335-080
89 mm 2.13 mm 13.25 MLS Cometic C4335-084
89 mm 2.18 mm 13.56 MLS Cometic C4335-086
89 mm 2.34 mm 14.56 MLS Cometic C4335-092
89 mm 2.49 mm 15.49 MLS Cometic C4335-098
89 mm 3.05 mm 18.97 MLS Cometic C4335-120
89 mm 3.56 mm 22.15 MLS Cometic C4335-140

Gasket volume: the space the gasket leaves above each cylinder. It enlarges the combustion chamber, and the larger it is, the lower the compression ratio. Values compare with one another at identical gasket bore.

Preparation and fitting

Fasteners Engines Tightening torque
Original cylinder head bolts
90005-PCX-003
F20C1, F20C2, F22C1 M11 bolts: 29 Nm, then 90°, then 90° (a further 90° for new bolts); 8 mm bolt: 22 Nm
ARP cylinder head studs
ARP-208-4702
F20C1, F20C2, F22C1 43 Nm, then 86 Nm, then 129 Nm

Before fitting, check the flatness of the cylinder head and of the block with a straight edge and have them skimmed if necessary. None of these gaskets requires sealant: Athena and Cometic both supply them already coated.

Reinforced ARP cylinder head studs F20C F22C →

Technical guide

The two constructions offered

Athena MLS cylinder head gasket Athena MLS
Two to five layers of AISI 301 stainless steel, laser cut, stamped and riveted. Around each cylinder, a layer folded over on itself, the Gas Stopper, concentrates the clamping load on the combustion chamber, while beads seal the water and oil passages. The outer layers receive a two-coat finish: the first withstands high temperatures and fills small irregularities on the block and cylinder head, the second, silicone based, keeps the gasket from sticking on disassembly. This is Athena's all-steel choice, from a prepared naturally aspirated engine to moderate forced induction.
Cometic MLS cylinder head gasket Cometic MLS
Several stamped and riveted stainless steel layers. The outer layers carry active beads around each cylinder and each fluid passage. Sealing is achieved with a moderate clamping load and limited bore distortion. This is the versatile choice, from a prepared naturally aspirated engine to light forced induction.

Choosing bore and thickness

Gasket bore. The Athena MLS comes in 89 mm, the Cometic MLS in 87.5, 88, 88.5 and 89 mm.

Thickness. Honda does not publish the thickness of the original gasket. A thicker gasket enlarges the combustion chamber and lowers the compression ratio; a thinner one reduces it and raises the ratio.

Your goal Thickness to choose
Keep the original compression ratio The value closest to the thickness of the removed gasket
Skimmed cylinder head, make up the lost height The thickness of the removed gasket + what was removed
Forced induction build, lower the ratio A thickness above that of the removed gasket
Naturally aspirated build, raise the ratio A thickness below that of the removed gasket

With a thickness finer than that of the removed gasket, measure piston protrusion above the block with a dial gauge: it is what determines the remaining clearance between piston and cylinder head.

The two brands

Athena Athena S.p.A. is an Italian manufacturer of engine gaskets and components, with its head office and main plant in Alonte, in the Veneto region. The group also produces in Spain, the United States, Brazil and India. Its multi-layer gaskets are fitted as original equipment by car manufacturers, and its racing range is designed and made entirely in Italy.
Cometic Cometic Gasket, Inc. is an American manufacturer of engine gaskets and sealing solutions, founded in 1989 and based in Concord, Ohio. Its speciality is the made-to-order gasket, in the bore and thickness required. All its products are made in the United States, from American materials.

Advantages over the original gasket

Criterion Original gasket 12251-PCX-004 Reinforced gaskets
Construction Multi-layer steel (MLS) Multi-layer stainless steel
Gasket bore 88 mm 87.5 to 89 mm
Thicknesses available Not published by Honda 0.69 to 3.56 mm, 19 values
Compression ratio adjustment None Through the thickness chosen
Resistance to overpressure Limited to standard output Designed for forced induction

When a reinforced gasket becomes necessary

  • Adding forced induction, or raising boost on an already turbocharged engine
  • Cylinder rebored beyond what the 88 mm bore of the original gasket covers
  • Looking for a compression ratio different from standard, higher or lower
  • Engine that has already lost its gasket, or is consuming coolant
  • Competition use, where the gasket goes through repeated temperature rises

Vehicle compatibility

Model Engine code Power Years
Honda S2000 (AP) F20C1 231 and 243 hp 1999-2003
Honda S2000 (AP) F22C1 239 and 243 hp 2003-

OEM part number: 12251-PCX-004.

Important: the F20B, F22A and F22B of the Accord and Prelude take other cylinder head gaskets: they are not covered by this page.

Why switch to a reinforced gasket?

A reinforced gasket holds where the standard one reaches its limit: at higher combustion pressure it keeps its shape instead of being crushed.

As soon as power goes up, turbo, supercharger or raised compression ratio, the head gasket becomes the weak link of the top end. Switching to a reinforced gasket is then not a comfort but a safeguard: it is what prevents the failure and the head removal that comes with it.

16 other products in the same category

Viewed products

Loading...