- On order
Inlet valve guides Honda S2000 F20C F22C
Set of 8 inlet valve guides for Honda S2000 F20C and F22C, 5.5 mm stem.
- Brands: FERREA and SUPERTECH
- Engines: F20C1, F20C3, F20CVTEC, F22C1
- Materials: copper bronze, manganese bronze
- Sizes: standard, standard with original centring
Applicable Honda engines
This set fits the inlet side of the naturally aspirated four-cylinder engines of the Honda S2000 roadster: F20C1, F20C3 and F20CVTEC in 2.0 litres, F22C1 in 2.2 litres, on both AP1 and AP2 cars.
Each cylinder head has 8 inlet valves, so 8 guides. On the F20C1, Honda only lists for this job the oversize part 12010-PCX-000, with a 5.5 mm valve stem and a factory stem-to-guide clearance of 0.02 to 0.05 mm.
FERREA and SUPERTECH inlet valve guides
Every inlet valve rides on its stem inside a bronze guide pressed into the head. It keeps the valve lined up with its seat, pulls some of the heat out of the stem into the aluminium and acts as the support of the stem seal. Once it wears, the valve leans over and seals badly; oil is drawn into the chamber, blue smoke follows and compression fades.
In the FERREA catalogue the copper-based bronze comes from American material and receives a heat treatment developed by the brand: better heat removal, resistance to high temperatures, slower wear, a better-lubricated stem. Accurate CNC machining accepts titanium and stainless valves. SUPERTECH chooses manganese bronze, which, the brand explains, removes heat considerably faster than the stock sintered guides do. One set provides 8 guides with a 5.5 mm bore, covering the full inlet side of a head, and is normally paired with uprated valves.
Valve guide technical specifications
| Part number | Brand | Material | Size | Stem Ø OEM 5.5 mm | Outside Ø | Length |
|---|---|---|---|---|---|---|
| VG1058*8 | FERREA | Copper bronze | Standard | 5.5 mm | ||
| VG1091*8 | FERREA | Copper bronze | Standard, original centring | 5.5 mm | ||
| GDE-HS255-I-8 | SUPERTECH | Manganese bronze | 5.5 mm | 11.065 mm | 41.6 mm |
Valve guide installation
| Part | Original | Reinforced |
|---|---|---|
| Inlet valve guide | 12010-PCX-000 | Replaced by the kit |
| Exhaust valve guide | 12011-PCX-010 | Exhaust guide kit |
| Stem seals | 12210-PZ1-003 / 12211-PZ1-003 | FERREA VS1003 / SUPERTECH VS-H5.5-I |
Technical guide
Our brands
| FERREA has been based in Fort Lauderdale, Florida, since 1978. It designs racing valves, guides, springs and stem seals, built at its Florida and Argentine plants. | |
| SUPERTECH settled in San Jose, California, over thirty years ago. Its specialty is competition valve train hardware: guides, valves, springs and titanium retainers, developed with engine builders. |
Standard or oversize?
FERREA offers the standard size, with or without the original centring. SUPERTECH publishes no size: its outside diameter is 11.065 mm.
Manganese bronze
Copper alloyed with manganese, aluminium, iron and traces of zinc makes up this bronze. It is hard and stands up to repeated rubbing and corrosion, which suits loaded bushes; a valve guide is one, with the stem rubbing it on every movement.
When valve guides must be replaced
- Oil being used up through the inlet-side stems
- Uprated valves put on an already worn head
- Track or circuit head to be put back in shape
- Valve train renewed from end to end
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| Honda S2000 (AP1) | F20C1 / F20C3 / F20CVTEC | 231-250 hp | 1999-2009 |
| Honda S2000 (AP2) | F22C1 | 239-243 hp | 2003- |
OEM reference (inlet valve guide): 12010-PCX-000 (F20C1, oversize)
Remember the exhaust guides and valve stem seals
For new guides, plan new stem seals: SUPERTECH lists the VS-H5.5-I on the inlet side.
| Exhaust valve guides Honda S2000 F20C F22C → |
-
Brand
-
ReferenceVG1058*8