Skip to content
  • In stock
Trimetal connecting rod bearings Honda F20C F22C H22A Trimetal connecting rod bearings Honda F20C F22C H22A

Trimetal connecting rod bearings Honda F20C F22C H22A

€68.64 (tax incl.)
€76.27 (tax incl.) -10%

Set of 8 trimetal connecting rod half-bearings for the Honda F20C, F22C and H22A.

  • Brands and treatments: ACL Race and King Racing XP
  • Compatibility: S2000, Prelude, Accord Type R
  • Engine codes: F20C1, F20C2, F22C1, H22A1, H22A2, H22A4, H22A5, H22A7, H22A8, H22Z1
  • Available sizes: standard to +0.50 mm, increased-clearance versions (HX, STDX)
4B1912H-STD
1 in stock in France
Pay in installments

The Honda F20C, F22C and H22A four-cylinder engines

The F20C (2.0 litres), F22C (2.2 litres) and H22A (2.2 litres) are Honda 16-valve twin overhead camshaft four-cylinder engines, fitted to the S2000, the Prelude and the Accord Type R. ACL and King list the same bearing set for these engines: a single set covers the family.

From the factory, these engines are fitted with standard production connecting rod bearings, sized for the loads of the original engine: as soon as power, engine speed or boost pressure increase, they reach their limits.

Trimetal connecting rod bearings

Three layers make up a trimetal bearing: the steel back for stiffness, the copper-lead intermediate layer for load capacity, then the anti-friction running layer that protects the crankpin. This set includes 8 half shells, that is 4 pairs.

Where an aluminium bi-metal bearing, designed for low to medium loads, withstands about 8,000 psi, a performance trimetal bearing goes up to 12,000 psi: 50% extra margin. That is what keeps it durable on an engine boosted by a turbo or supercharger, or pushed to high rpm.

Technical specifications

Fitment dimensions common to all references
ACL / King bearings
Crankpin Ø 47.980 / 48.000 mm
Housing bore Ø 51.004 / 51.024 mm
Width 19.4 mm
ReferenceBrand and treatmentSizeWall thickness (mm)
4B1912H-STD ACL Race - Untreated Standard 1.496
4B1912HX-STD ACL Race - Untreated Std, increased clearance (HX) 1.483
4B1912H-.025 ACL Race - Untreated +0.025 1.509
4B1912H-.25 ACL Race - Untreated +0.25 1.621
4B1912H-.50 ACL Race - Untreated +0.50 1.746
4B1912HD-STD ACL Race - Untreated Standard, dowel hole
4B1912HXD-STD ACL Race - Untreated Std, increased clearance (HX), dowel hole
4B1912HD-.025 ACL Race - Untreated +0.025, dowel hole
4B1912HD-.25 ACL Race - Untreated +0.25, dowel hole
CR4033XP King Racing - Untreated Standard 1.496
CR4033XP STDX King Racing - Untreated Std, increased clearance (STDX) 1.483
CR4033XP.026 King Racing - Untreated +0.026 1.509
CR4033XP0.25 King Racing - Untreated +0.25 1.623

The references ending in D (4B1912HD-STD, 4B1912HXD-STD, 4B1912HD-.025, 4B1912HD-.25) are the dowel-hole versions: the lower shell has a dowel hole that matches a dowel location on the connecting rod cap. Choose according to whether your connecting rod cap has a dowel or not.

Running clearance

Between the crankpin and the bearing there is a small gap, the running clearance, in which the oil film circulates.

In operation there is no metal-to-metal contact: the crankpin turns on this oil film, which supports the whole load. The clearance determines its thickness. A clearance that is too tight hinders oil flow, heats the assembly and promotes seizure; one that is too wide lets oil leak away, weakens the film and makes oil pressure drop. The correct clearance balances oil flow and film strength.

Size / gradeWhen to choose itACL Race SeriesKing XP
Standard (STD) Standard journal, not reground 0.051 to 0.061 mm 0.048 mm - 0.054 mm
Increased clearance (HX / STDX) Wider clearance: high oil flow, high rpm 0.077 to 0.086 mm 0.073 mm - 0.079 mm
+0.025 / +0.026 mm Polished journal 0.051 to 0.061 mm 0.048 mm - 0.054 mm
+0.25 mm Journal reground to 0.25 mm 0.051 to 0.061 mm 0.048 mm - 0.054 mm
+0.50 mm Journal reground to 0.50 mm 0.051 to 0.061 mm 0.048 mm - 0.054 mm

Checking on assembly: lay a calibrated strip (Plastigauge) on the journal, torque the rod cap to spec, then compare the crushed strip against the gauge to read the clearance.

Plastigauge

Order the Plastigauge →

Technical guide

Designed for engine building and motorsport, these ACL and King trimetal connecting rod bearings carry much more load than an original bearing, whether the engine gains power, revs higher or receives a turbo or supercharger. They are available in several sizes: the standard size, a +0.025 / +0.026 mm size for a crankpin that has only been polished, +0.25 and +0.50 mm regrind sizes and the HX / STDX version with increased clearance for high-revving engines or engines needing a high oil flow. That makes it possible to put a reground crankshaft back into service without changing range and to set the clearance for the oil and use.

The two brands

ACL ACL Bearing Company has been making high-performance engine bearings in Australia since 1949. Its Race Series offers precise trimetal bearings, available in many sizes and proven in tuned and racing engines worldwide.
King Racing King Engine Bearings, an Israeli manufacturer active since the 1960s, produces high-performance engine bearings. Its pMax Black trimetal alloy is designed to withstand heavy loads.

Construction and advantages

Criterion ACL Race Series King Racing
Cross-section Cross-section of an ACL Race Series trimetal bearing Cross-section of a King Racing trimetal bearing
Type High-performance trimetal bearing High-performance trimetal bearing
Country of manufacture Australia Israel
Construction Trimetal: steel back, copper layer, soft surface Trimetal: steel back, copper layer, soft surface
Alloy Race Series (copper-lead) pMax Black (hardened copper-lead)
Protective coating No No
Available sizes Standard to +0.50 mm (+ increased clearance HX) Standard to +0.25 mm (+ increased clearance STDX)

Vehicle compatibility

This connecting rod bearing set fits the F20C, F22C and H22A four-cylinder engines of the following Honda models:

BrandModel (chassis)Engine codePowerYears
HONDA PRELUDE IV (BB_) 2.2 i 16V Vtec (BB1) / 2.2 VTi-R (BB1, BB4) H22A1, H22A2 185–193 hp 1993–1997
HONDA PRELUDE V (BB_) 2.2 16V (BB6, BB8) / 2.2 VTi-R (BB6) / 2.2 / 2.2 (BB6) H22A2, H22A4, H22A5, H22A8 185–203 hp 1996–2001
HONDA ACCORD VI (CK, CG, CH, CF, CL) 2.2 Type-R (CH1) / 2.2 Euro R (CL1) H22A7 212–220 hp 1999–2002
HONDA S2000 (AP) 2.0 Vtec / 2.0 / 2.2 Vtec (AP2) / 2.2 F20C1, F22C1 231–243 hp 1999–2008

Why replace the bearings

When a connecting rod bearing gives way, the damage quickly spreads beyond the part itself: a scored crankpin, debris carried through the whole oil circuit, a crankshaft to regrind at the very least, sometimes a rod and block lost. A bearing set costs far less than a regrind and is nothing compared with a complete engine rebuild. It is the cheapest part of the rotating assembly, yet the one whose failure is most expensive.

16 other products in the same category

Viewed products

Loading...