Skip to content
  • On order
Reinforced head gasket Honda B20B B20Z - C4250-030 Reinforced head gasket Honda B20B B20Z - C4250-030 Reinforced head gasket Honda B20B B20Z - C4250-030 Reinforced head gasket Honda B20B B20Z - C4250-030

Reinforced head gasket Honda 2.0 B20B B20B4 B20Z1 B20Z2

€113.59 (tax incl.)
€151.45 (tax incl.) -25%

Reinforced Athena and Cometic head gasket, in multi-layer MLS. Sold individually, one gasket per engine.

  • Brands: Athena, Cometic
  • Engines: Honda 2.0 L B20B, B20B4, B20Z1, B20Z2
  • Bore: 85 mm
  • Thickness: 0.69 to 3.56 mm
  • Replaces: 12251-P3F-005
C4250-030
0 in stock in France
ORDER TODAY, WE SHIP IN 3 WEEKS
Pay in installments

The Honda engines covered

The B20B, B20Z1, B20B4 and B20Z2 are 2.0 litre petrol engines. They power the Honda CR-V I (RD), Orthia / Partner, SMX and Stepwgn models listed in the compatibility table below.

The original gasket carries part number 12251-P3F-005. Honda publishes neither its bore, nor its thickness, nor its construction. An engine takes a single cylinder head gasket. It is sized for standard combustion pressure; when that rises, the clamping load eases, the head lifts slightly and coolant enters a cylinder.

Reinforced cylinder head gaskets

Sealing does not rest on the gasket alone but also on the fasteners that press the head onto the block. Beyond 100 N/mm², a composite gasket compresses for good; the 301 stainless steel of MLS gaskets takes 517 N/mm², 5 times more, and recovers its shape at every combustion. This applies to the B20B, B20Z1, B20B4 and B20Z2.

This page brings together twenty part numbers from two competition makers, Athena (Italy) and Cometic (United States), all with an 85 mm bore: nineteen in MLS construction, multi-layer steel, and one in MLX construction, with a chamber stopper. Athena offers one MLS part number, in 0.85 mm (338104R); Cometic offers nineteen: the eighteen C4250 in MLS, from 0.69 to 3.56 mm, and the C14000-043 in MLX, at 1.09 mm. The engine takes only one gasket: order a single part number, according to the thickness you want. The thicknesses offered let you adjust the compression ratio without touching the pistons or the cylinder head. As a rule, the gasket bore chosen is at least 0.5 mm larger than the actual cylinder bore. Each part number is sold individually, one gasket per engine.

Technical specifications

Gasket bore Thickness Gasket volume Gasket type
OEM not specified
Brand Part number
OEM 12251-P3F-005
85 mm 0.69 mm 3.92 MLS Cometic C4250-027
85 mm 0.76 mm 4.31 MLS Cometic C4250-030
85 mm 0.85 mm 4.82 MLS Athena 338104R
85 mm 0.91 mm 5.16 MLS Cometic C4250-036
85 mm 1.02 mm 5.79 MLS Cometic C4250-040
85 mm 1.09 mm 6.19 MLX Cometic C14000-043
85 mm 1.14 mm 6.47 MLS Cometic C4250-045
85 mm 1.30 mm 7.38 MLS Cometic C4250-051
85 mm 1.42 mm 8.06 MLS Cometic C4250-056
85 mm 1.52 mm 8.63 MLS Cometic C4250-060
85 mm 1.68 mm 9.53 MLS Cometic C4250-066
85 mm 1.78 mm 10.10 MLS Cometic C4250-070
85 mm 1.91 mm 10.84 MLS Cometic C4250-075
85 mm 2.03 mm 11.52 MLS Cometic C4250-080
85 mm 2.13 mm 12.09 MLS Cometic C4250-084
85 mm 2.18 mm 12.37 MLS Cometic C4250-086
85 mm 2.34 mm 13.28 MLS Cometic C4250-092
85 mm 2.49 mm 14.13 MLS Cometic C4250-098
85 mm 3.05 mm 17.31 MLS Cometic C4250-120
85 mm 3.56 mm 20.20 MLS Cometic C4250-140

A gasket's volume is the free space it leaves above each cylinder: it adds to the combustion chamber and lowers the compression ratio. All the part numbers on this page share the same 85 mm bore, so they can be compared with one another.

Preparation and fitting

Fasteners Engines Tightening torque
Original cylinder head bolts
M12x1,25 x 150
B20B, B20Z1, B20B4, B20Z2 29 Nm, then 85 Nm

Before reassembly, check the flatness of the head and block mating faces with a straightedge and have them resurfaced if needed. Cometic gaskets arrive already coated: do not apply any sealing paste. This applies to the B20B, B20Z1, B20B4 and B20Z2.

Technical guide

The three constructions offered

Athena MLS cylinder head gasket Athena MLS
Athena MLS
Between two and five AISI 301 stainless steel sheets, laser cut, stamped and riveted. A folded sheet rings each cylinder: this Gas Stopper sends the clamping load back toward the combustion chamber, while beads close off the water and oil circuits. Each outer face receives a coating: one layer withstands high temperatures and fills small flaws in the block and head, a silicone layer keeps the gasket from sticking at removal. It is Athena's all-steel formula, suited from the prepared naturally aspirated engine to moderate forced induction. This applies to the B20B, B20Z1, B20B4 and B20Z2.
Cometic MLS cylinder head gasket Cometic MLS
Several stainless steel sheets, stamped and riveted together. Each outer sheet carries active beads tracing the outline of every cylinder and fluid passage. A moderate clamping load is enough to seal, and the bore distorts very little. This versatile gasket suits anything from a tuned naturally aspirated engine to light boost. Cometic offers it here in eighteen thicknesses, from 0.69 to 3.56 mm.
Cometic MLX cylinder head gasket Cometic MLX
Same construction as the MLS, with a centre sheet folded back to form a stopper around each combustion chamber, and a high-temperature coating. The stopper concentrates the clamping close to the bore without distorting it further. It is the strongest all-steel gasket on this page: choose it when boost goes beyond what an MLS can take. Cometic offers it here in 85 mm, at 1.09 mm (C14000-043).

Choosing bore and thickness

Gasket bore. The Athena MLS (338104R), the Cometic MLS (C4250) and the Cometic MLX (C14000-043) are all offered here in 85 mm.

Thickness. No thickness is published for the original gasket 12251-P3F-005. A thicker gasket enlarges the combustion chamber and lowers the compression ratio; a thinner one reduces it and raises the ratio.

Your goal Thickness to choose
Keep the original compression ratio Original thickness not published: measure the removed gasket and choose, from the values offered, the one nearest your measurement
Skimmed cylinder head, make up the lost height The offered value nearest the removed gasket's thickness, increased by the metal removed when resurfacing
Forced induction build, lower the ratio A thickness above that of the removed gasket
Naturally aspirated build, raise the ratio A thickness below that of the removed gasket, down to 0.69 mm, the thinnest of the values offered

Before choosing a thickness below the original, use a dial gauge to read how far the pistons stand proud of the block face: it sets the clearance that remains between piston and head.

The two brands

Athena Athena S.p.A. is an Italian maker of gaskets and engine components. Its head office and main plant are in Alonte, in the Veneto region, and the group also has sites in Spain, the United States, Brazil and India. Its multi-layer gaskets fit certain car makers as original equipment, and its competition range is entirely designed and made in Italy. Part number 338104R on this page comes from it.
Cometic Cometic Gasket, Inc. is an American company founded in 1989 and based in Concord, Ohio, which designs and builds gaskets and sealing parts for engines. It earned its name with made-to-measure gaskets, cut to the bore and thickness required, all made in the United States from American materials. The C4250 range on this page is made by the company.

Advantages over the original gasket

Criterion Original gasket 12251-P3F-005 Reinforced gaskets
Construction Construction not stated by the manufacturer Multilayer stainless steel (MLS) or with a chamber stopper (MLX)
Gasket bore not published 85 mm
Thicknesses available thickness not provided by the manufacturer 0.69 to 3.56 mm, twenty values
Compression ratio adjustment None Through the thickness chosen
Resistance to overpressure Limited to standard output Designed for forced induction

When a reinforced gasket becomes necessary

  • Adding forced induction, or raising boost on an already turbocharged engine
  • Cylinder rebored beyond what the 85 mm bore of these gaskets covers
  • Looking for a compression ratio different from standard, higher or lower
  • Engine that has already lost its gasket, or is consuming coolant
  • Competition use, where the gasket goes through repeated temperature rises

Vehicle compatibility

Model Engine code Power Years
Honda CR-V I (RD) 2.0 (RD2) B20B 150 hp 1998-2001
Honda CR-V I (RD) 2.0 16V 4WD (RD1, RD3) B20B 128 hp 1995-2001
Honda Orthia / Partner (EL_, EY_) 2.0 (EL2) B20B 150 hp 1995-2001
Honda Orthia / Partner (EL_, EY_) 2.0 4WD (EL3) B20B 150 hp 1995-2001
Honda SMX (RH) 2.0 (RH1) B20B 131 hp 1996-2001
Honda SMX (RH) 2.0 4WD (RH2) B20B 131 hp 1996-2001
Honda Stepwgn (E-RF_, GF-RF_) 2.0 (RF1) B20B 135 and 125 hp 1996-2000
Honda Stepwgn (E-RF_, GF-RF_) 2.0 (RF2) B20B 135 hp 1999-2001
Honda CR-V I (RD) 2.0 (RD1) B20Z1 133 hp 1999-2002
Honda CR-V I (RD) 2.0 16V 4WD (RD1, RD3) B20Z1 147 hp 1999-2002
Honda CR-V I (RD) 2.0 B20B4 128 hp 1996-1998
Honda CR-V I (RD) 2.0 (RD2) B20Z2 148 hp 1998-2001

OEM part number: 12251-P3F-005.

Important: the part numbers on this page suit only the B20B, B20Z1, B20B4 and B20Z2 engines: check your vehicle's engine code before ordering.

Why switch to a reinforced gasket?

When the original gasket is no longer enough, the reinforced gasket replaces it: under higher combustion pressure it keeps its shape instead of collapsing. This applies to the B20B, B20Z1, B20B4 and B20Z2.

Whether you add a turbo, raise the compression ratio or rev higher with livelier cams, the cylinder head gasket becomes the weak link of a high-output engine. A reinforced gasket prevents the leak and the head removal that goes with it, far costlier than the gasket. This applies to the B20B, B20Z1, B20B4 and B20Z2.

7 other products in the same category

Viewed products

Loading...