- On order
Reinforced exhaust valves Honda Civic Type R K20C1
Set of 8 reinforced exhaust valves for the Honda K20C1.
- Brands: SUPERTECH, FERREA
- Engine: K20C1 (Civic Type R FK2, FK8, FL5)
- Dimensions: 29.0 mm head (standard) or 30.0 mm, 5.47 mm stem
- Material: sodium filled Inconel or Super Alloy
Honda engines covered
The K20C1 is Honda's 1,996 cc turbocharged four-cylinder (86 mm bore, 85.9 mm stroke) that has powered the Civic Type R since the 2015 FK2, then the FK8 from 2017 and the FL5 from 2022.
Its 16-valve cylinder head has 8 exhaust valves, two per cylinder, sitting in the gas flow that drives the turbine. The reinforced valves in this set have a 29.0 mm head, a 5.47 mm stem and a 114.7 mm overall length.
SUPERTECH reinforced exhaust valves
Turbocharged from the factory, the K20C1 of the Civic Type R sends its exhaust stream straight into the turbine, and the exhaust valves sit right in that path. Measured in the metal of the head, valve temperature runs from 760 to 870 °C in a naturally aspirated engine; on this boosted unit it climbs well past 1,000 °C. Around three quarters of that heat, 75 %, leaves through the seat each time the valve closes, while one fifth, 20 %, travels up the stem into the guide. For reference, EV8 steel holds 550 MPa at 600 °C and only 300 MPa near 800 °C. More boost means a hotter head that fatigues, distorts and eventually loses its seal.
The range covers three materials. For this engine SUPERTECH builds its valve from Inconel, a superalloy based on nickel which retains 860 MPa at 732 °C and 554 MPa at 816 °C, giving it roughly 85 % more strength than EV8 around 800 °C; its hollow stem is filled with sodium, which melts at 97.8 °C and shuttles heat out of the head down the stem. FERREA offers two Super Alloy valves from its Competition Plus line, credited by the maker with 20 % more hot strength and 25 % longer seat life, plus a 6000 series valve made of EV8 stainless steel and finished with a hard-chromed stem.
Every part keeps the stock 29 mm head except FERREA F2395P, which grows to 30 mm. That extra millimetre widens the exit for spent gases: the chamber empties sooner, fills better on the next cycle and power rises. This requires machining all 8 exhaust seats to 30 mm.
Exhaust valve technical specifications
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| HEVI-1060D-HS-8 | SUPERTECH | Standard | 29.0 mm | 5.47 mm | 114.7 mm | 1 | Sodium filled Inconel |
| F2394P*8 | FERREA | Standard | 29.0 mm | 5.47 mm | 114.8 mm | Super Alloy (nickel-based) | |
| F6355*8 | FERREA | Standard | 29.0 mm | 5.47 mm | 114.8 mm | EV8 stainless steel, hard chrome stem | |
| F2395P*8 | FERREA | +1 mm | 30.0 mm | 5.47 mm | 114.8 mm | Super Alloy (nickel-based) |
The HEVI-1060D-HS-8 is designed for the turbocharged K20C1, in standard size, in Inconel with a hollow sodium-filled stem.
Valve fitting
| Part | Honda original | Reinforced |
|---|---|---|
| Collets | KPR-5.5-7A-ST-16 (1 groove) | |
| Valve stem seals | VS-H5.5E-8 / VS1002*8 (exhaust) | |
| Valve guide |
Before closing the cylinder head, compare the groove of the HEVI-1060D-HS-8 with the profile of the collets you are refitting.
With a standard size head, the 8 exhaust seats stay at the Honda machining diameter. With the FERREA F2395P, they must be machined to 30.0 mm.
Never drill or cut a sodium filled valve: in contact with water, sodium releases hydrogen and caustic soda.
Technical guide
Our brands
| Founded in Silicon Valley more than three decades ago, SUPERTECH specialises in racing valvetrain parts. Every valve it produces is designed around a single engine, be it made of stainless, titanium or Inconel, and then refined alongside competition engine builders over the years. | |
| Horacio Ferrea and Daniel Urrutia started FERREA Racing Components in 1978 to make their own valves. Today the company's Florida and Argentina factories machine stainless, nickel-based alloys and titanium for racers worldwide, from oval tracks to drag strips. |
How to choose
Three references keep the 29 mm head and one enlarges it: first decide whether the seats keep their original diameter, then pick sodium-filled Inconel, Super Alloy or EV8 stainless steel to match the boost you plan to run.
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Stock size, 29 mm The head keeps its factory seats, which only need a light cut if they are sound. Three valves fit: SUPERTECH HEVI-1060D-HS, FERREA F2394P in Super Alloy and FERREA F6355 in EV8 stainless steel. |
+1 mm, 30 mm FERREA F2395P adds one millimetre to the head, worth about 10 to 12 cfm of extra flow: gases leave more freely, the next charge comes in better and power follows. The 8 seats are machined to 30 mm, which also saves seats that were already recut. |
| Material | EV8 stainless or Super Alloy On the FERREA side, the 6000 series in EV8 stainless steel suits a K20C1 kept close to stock boost, while Competition Plus Super Alloy takes over once a remap pushes exhaust gas temperature up. Super Alloy comes in stock and +1 mm sizes. |
Sodium-filled Inconel SUPERTECH HEVI-1060D-HS combines the toughest nickel alloy in the range with a sodium-cooled stem that lowers head temperature: the one to choose for high boost or regular track use. Single groove, stock size. |
When reinforced valves become necessary
- Higher boost pressure (sodium-filled Inconel advised)
- Remap paired with a larger turbocharger
- More aggressive camshafts or stiffer valve springs
- Several track days in a row
- Head rebuild after exhaust valves damaged by excessive heat
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| Civic IX 2.0 i-VTEC Type R (FK2) | K20C1 | 310 hp | 2015-2016 |
| Civic X 2.0 Type R (FK8) | K20C1 | 306-320 hp | 2017- |
| Civic XI 2.0 Type R (FL5) | K20C1 | 300-330 hp | 2022- |
OEM part number (exhaust valve):
Don't forget the inlet valves
Taking the K20C1 cylinder head off? Make the most of it and fit new inlet valves along with fresh valve stem seals across the whole head. Find them here:
| Inlet valves Honda K20C1 → |
-
Brand
-
ReferenceF6355*8