Skip to content
  • On order
Bronze inlet valve guides Honda K20C1 Type R Bronze inlet valve guides Honda K20C1 Type R

FERREA bronze inlet valve guides Honda K20C1

€54.30 (tax incl.)
€67.87 (tax incl.) -20%

Kit of 8 inlet valve guides for the Honda K20C1.

  • Brand: FERREA
  • Engine: K20C1 (Civic Type R FK2, FK8, FL5)
  • Material: copper bronze
  • Sizes: standard or +0.025 mm
VG1102*8
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

Honda engines concerned

The guides in this kit fit the inlet side of the cylinder head of the Honda K20C1 2.0 litre turbo four-cylinder, the engine of the Civic Type R FK2, FK8 and FL5.

Each of the 8 inlet valves slides in a guide pressed into the cylinder head; this kit supplies the 8 replacement guides.

FERREA copper bronze inlet valve guides

The guide keeps the inlet valve aligned with its seat, releases into the cylinder head some of the heat stored by the stem and carries the sealing ring. With wear, the valve starts to float: imperfect contact with the seat, oil drawn down the stem, blue smoke and compression that slowly fades.

FERREA makes these guides from a copper and bronze alloy of American origin. A heat treatment developed by the brand improves, in its own words, heat removal, wear resistance, high temperature strength and lubricity. CNC machined to tight tolerances, they suit titanium as well as stainless valves. The kit holds the 8 inlet guides of a K20C1 head and is usually fitted alongside reinforced valves.

Valve guide technical specifications

Part numberBrandMaterialSizeStem ØOutside ØLength
VG1102*8 FERREA Copper bronze Standard
VG1103*8 FERREA Copper bronze +0.025 mm

Valve guide installation

ComponentOriginalReinforced
Inlet valve guide Replaced by the kit
Exhaust valve guide Exhaust guide kit
Stem seals Inlet / Exhaust
Valves Inlet / Exhaust

Technical guide

For the K20C1, reinforced valves are available for both inlet and exhaust:

Honda K20C1 inlet valves →
Honda K20C1 exhaust valves →

Our brand

FERREA Founded in 1978 in Fort Lauderdale, Florida, FERREA builds in the USA and Argentina nearly every valvetrain part of a racing engine, from valves and springs to guides.

Standard or oversize?

FERREA offers this guide in standard size and in a 0.0254 mm (0.001") oversize, for a cylinder head whose guide bore has been reamed.

When valve guides must be replaced

  • Oil being burnt past the inlet valve stems
  • Reinforced valves in a high-mileage cylinder head
  • Head rebuilt for track or hillclimb use
  • General overhaul of the valvetrain

Vehicle compatibility

ModelEngine codePowerYears
Civic IX Type R (FK2) K20C1 310 hp 2015-2016
Civic X Type R (FK8) K20C1 306-320 hp 2017-2022
Civic XI Type R (FL5) K20C1 300-330 hp 2022-

Remember the exhaust guides and the valve stem seals

Fresh guides deserve fresh stem seals. For the K20C1, see the exhaust guides and seals:

Honda K20C1 exhaust valve guides →
Honda inlet valve stem seals →
Honda exhaust valve stem seals →

11 other products in the same category

Viewed products

Loading...