Skip to content
  • On order
Bronze exhaust valve guides Honda K20C1 Type R Bronze exhaust valve guides Honda K20C1 Type R

FERREA bronze exhaust valve guides Honda K20C1

€54.30 (tax incl.)
€67.87 (tax incl.) -20%

Kit of 8 exhaust valve guides for the Honda K20C1.

  • Brand: FERREA
  • Engine: K20C1 (Civic Type R FK2, FK8, FL5)
  • Material: copper bronze
  • Sizes: standard or +0.025 mm
VG1100*8
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

Honda engines concerned

This kit brings together the exhaust side guides of the cylinder head of the Honda K20C1, the 2.0 litre turbo four-cylinder of the Civic Type R FK2, FK8 and FL5.

The 8 exhaust valves each slide in a guide pressed into the cylinder head, which this kit replaces in full.

FERREA copper bronze exhaust valve guides

The exhaust guide keeps the valve centred over its seat, directs the very high heat of its stem towards the cylinder head and supports the seal. If it gains play, the valve vibrates, closes poorly and oil slips into the exhaust port: a blue plume, a falling oil level and a cylinder losing compression.

For these guides FERREA uses a copper and bronze blend of American origin, with a heat treatment specific to the manufacturer; by the brand's account, it improves heat removal, resistance to wear and to high temperatures, and sliding. Precise CNC machining makes them compatible with titanium and stainless valves. The kit supplies the 8 exhaust guides needed by a K20C1, often paired with reinforced valves.

Valve guide technical specifications

Part numberBrandMaterialSizeStem ØOutside ØLength
VG1100*8 FERREA Copper bronze Standard
VG1101*8 FERREA Copper bronze +0.025 mm

Valve guide installation

ComponentOriginalReinforced
Exhaust valve guide Replaced by the kit
Inlet valve guide Inlet guide kit
Stem seals Inlet / Exhaust
Valves Inlet / Exhaust

Technical guide

Reinforced valves are available for the K20C1, on the inlet and on the exhaust side:

Honda K20C1 inlet valves →
Honda K20C1 exhaust valves →

Our brand

FERREA Set up in Fort Lauderdale, Florida, in 1978, FERREA produces at its US and Argentinian sites almost the whole valvetrain of a racing engine: valves, springs, retainers, guides and stem seals.

Standard or oversize?

This FERREA guide comes in standard size or with a 0.0254 mm (0.001") oversize, the latter being reserved for reamed guide bores.

When valve guides must be replaced

  • Blue smoke at idle or when lifting off
  • Uprated valves going into a fatigued head
  • Cylinder head rebuilt for intensive track use
  • Complete valvetrain refurbishment

Vehicle compatibility

ModelEngine codePowerYears
Civic IX Type R (FK2) K20C1 310 hp 2015-2016
Civic X Type R (FK8) K20C1 306-320 hp 2017-2022
Civic XI Type R (FL5) K20C1 300-330 hp 2022-

Remember the inlet guides and the valve stem seals

Swap the guides and swap the stem seals too. For the K20C1, see the inlet guides and seals:

Honda K20C1 inlet valve guides →
Honda inlet valve stem seals →
Honda exhaust valve stem seals →

11 other products in the same category

Viewed products

Loading...