- On order
Reinforced inlet valves HONDA K20C1
Set of 8 reinforced inlet valves for HONDA K20C1 (Civic Type R FK2, FK8 and FL5).
- Brands: SUPERTECH, FERREA
- Engine: K20C1
- Dimensions: 35.0 mm or 36.0 mm head, 5.48 mm stem
- Material: black nitride stainless steel (SUPERTECH); FERREA Competition Plus and 6000 Series
HONDA engines covered
The K20C1 is Honda's 1,996 cc 16-valve turbocharged four-cylinder of the Civic Type R, from 300 to 330 hp: Civic IX FK2 from 2015, Civic X FK8 from 2017 and Civic XI FL5 from 2022.
It has 8 inlet valves, two per cylinder. Boost pressure, a sharper camshaft, stiffer springs or a higher rev limit ask far more of them than stock use.
SUPERTECH and FERREA reinforced inlet valves
On the Civic Type R (FK2, FK8 and FL5), the K20C1 feeds its turbo air through eight inlet valves, two in every cylinder. At high revs each valve is torn from its seat, then slammed back many times a second, the stem gliding endlessly in its guide. They endure 400 to 550 °C, where stock chrome-silicon steel runs out of breath: 500 MPa at 500 °C, then 250 MPa at 600 °C, just beyond, hence 50 % less strength. On a remapped K20C1, more boost, more lift, firmer springs or more revs increase impacts, friction and heat.
SUPERTECH valves use a chrome-nickel racing stainless related to EV8 (21-4N), holding 650 MPa at 500 °C, 30 % beyond stock, and 550 MPa at 600 °C, 120 % beyond; black nitriding hardens and polishes their stem for less friction and slower wear in the K20C1 guide. FERREA offers its 6000 Series, EV8 stainless with a hard-chromed stem, and its special-alloy Competition Plus series, credited with a 20 % gain against heat and fatigue, with seats that live 25 % longer.
Every part comes with the original 35.0 mm head, 5.48 mm stem and 117.25 mm length; FERREA adds a +1 mm Competition Plus, 36.0 mm head. The bigger diameter opens up the seat and improves K20C1 filling, provided the eight inlet seats are machined to 36.0 mm.
Inlet valve technical specification
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| HIVN-1060D-8 | SUPERTECH | Standard | 35.0 mm | 5.48 mm | 117.25 mm | Black nitride stainless steel | |
| F2396P*8 | FERREA Competition Plus | Standard | 35.0 mm | 5.48 mm | 117.25 mm | Special alloy | |
| F2397P*8 | FERREA Competition Plus | +1 mm | 36.0 mm | 5.48 mm | 117.25 mm | Special alloy | |
| F6357*8 | FERREA 6000 Series | Standard | 35.0 mm | 5.48 mm | 117.25 mm | EV8 stainless, hard chrome stem |
HIVN-1060D-8: dished head.
FERREA: valves intended for the K20C1 Civic Type R.
Fitting details
| Part | HONDA original | Reinforced |
|---|---|---|
| Valve collets | KPR-5.5-7A-ST-16 | |
| Valve stem seals | VS-H5.5I-8 (inlet) | |
| Valve guide | VG1102 |
Technical guide
Our brands
| SUPERTECH, a San Jose (California) company, has designed competition valvetrain parts for over 30 years. Each valve is laid out for a given head, checked one by one with X-ray, laser and ultrasound, and signed off by drag and circuit engine builders. | |
| FERREA Racing Components started in 1978 in Florida, in Fort Lauderdale, the work of two Argentine-born engine builders; all manufacturing stays there. Forged as one block from bar and CNC-finished, its valves run in NASCAR, drag and circuit engines. |
How to choose
Below the upper retainer, collets wedge into the stem groove to hold the valve. On this turbo K20C1, two criteria split the range: size, then material.
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Standard size, 35.0 mm For a K20C1 head whose 8 inlet seats are still factory: fitted without machining, 5.48 mm stem and 117.25 mm length. From SUPERTECH, FERREA 6000 Series and FERREA Competition Plus. |
+1 mm oversize, 36.0 mm The seat widens and the Type R breathes more, for extra power: about 10 to 12 cfm better per millimetre of head. Seats machined to 36.0 mm, ports reworked if possible; useful too for seats already reground. FERREA Competition Plus only. |
| Material | Stainless SUPERTECH with black nitrided stem, harder and slicker, dished head; FERREA 6000 Series in EV8 stainless with hard chrome stem, keeping 550 MPa at 600 °C. For a road or circuit Type R, KPR-5.5-7A-ST-16 collets. |
Special alloy FERREA Competition Plus, which the brand rates 20 % tougher against heat and fatigue, with seats lasting 25 % longer. For a heavily tuned K20C1, on circuit or in rally, standard size or +1 mm. |
When reinforced valves become necessary
- A bigger turbo or higher boost on the K20C1
- More aggressive cams or stiffer springs
- Rev cut moved further up
- Type R head reworked for track or rally use
- Marked, tired or already reworked Honda valves
Compatible vehicles
| Model | Engine code | Power | Years |
|---|---|---|---|
| Civic IX 2.0 i-VTEC Type R (FK2) | K20C1 | 310 hp | 2015-2016 |
| Civic X 2.0 Type-R | K20C1 | 306 hp | 2017- |
| Civic X 2.0 Type-R (FK8) | K20C1 | 310 hp | 2017-2021 |
| Civic X 2.0 Type-R (FK8) | K20C1 | 320 hp | 2017-2022 |
| Civic XI Type-R | K20C1 | 300 hp | 2022- |
| Civic XI Type-R (FL5) | K20C1 | 320 hp | 2022- |
| Civic XI Type-R (FL5) | K20C1 | 330 hp | 2022- |
Related products
For a rebuilt K20C1 head, also think of reinforced exhaust valves and replacing the valve stem seals. Here is their page for this engine:
| HONDA Civic Type R K20C1 exhaust valves → |
-
Brand
-
ReferenceF6357*8