Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
Categories
Manufacturers
Categories
VOLVO part number R-VOL-003-I kit of 4 forged I-beam ZRP connecting rods with ARP bolts and AMPCO 18 bushing connecting rod small end
ALFA ROMEO part number R-ALF-005-I kit of 4 forged I-beam ZRP connecting rods with ARP bolts and AMPCO 18 bushing connecting rod small end
MISHIMOTO aluminum water radiator for MAZDA RX7 (FD) 1.3 Wenkel bi-turbo RE13B 239cv 07/1992-08/2002
MISHIMOTO Grey Thermostatic Oil Cooler kit for MAZDA MX-5 (NB) 1.8 16V BPD, BP-ZE 139hp, 140hp, 146hp 11/200-10/2005
MISHIMOTO air intake kit for MERCEDES Classe A 45 (W176) AMG 4-matic 2.0 M133.980 360hp 06/2013-06/2015
VAG VW 1.8 Clutch release bearing Sachs Golf II GTi 16v
4-Injector kit 1200cc Fuel Injector Clinics for MITSUBISHI Lancer EVO IX 2.0 16V 4G63 280hp 01-2006-Technical Specifications:Center distance between seals: 60mmDiameter on the fuel rail side: 11mmDiameter on the intake manifold side: 16mmConnection: EV1Image for illustrative purposes only
Manufacturer sleeve made of 304L stainless steel, with a wide weld and tight tolerances for easy installation.WARNING: This sleeve is not compatible with the original manifold.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameters, manifold flange modifications, vehicle/competition specifications,...
REDOX silicone coupling connector sleeve, 130mm inner diameter, 76mm length
Silicone reducer 90A REDOX, inner diameters 19-42mm, length 100x100mm
COOL IT Clamp-on Thermal Insulation 15.24 x 91.44cm for pipe, with 4 clampsReduces heat transfer (blocks 95% of radiant heat).Generic photo
COOL IT Clamp-on Thermal Insulation 15.24 x 30.48cm for pipe, with 4 clampsReduces heat transfer (blocks 95% of radiant heat).Generic photo
Wideband probe cable / AFR 5.5m for Innovate LM-2, LC-2, MTX-L (LSU 4.9 probe)
Muffler stainless steel RC RACING for VOLKSWAGEN Polo GTI 1.8 TSI 192cv from 2015
KS Kolbenschmidt oil filter for BMW 3 Series (E30) 325i 2.5 12V 09/1985-06/1991
BREEZY 235mm 19-row matrix oil cooler kit, DASH10 male connections with 99A deg C MOCAL thermostatic sandwich plate
Known as "inter IRESA", here you will find the RC RACING TI-362S stainless steel exhaust mid-pipe, manufactured in Spain, for which NSB CONCEPT has been an official distributor since 2009
High-quality AUDI S3 (8L) 1.8T 20V Quattro 11/1998-06/2003 Silent-Blocks Powerflex BLACK SERIES Anti-torque (AUDI S3 8L 1.8T 20V Quattro 11/1998-06/2003 Silent-Blocks) for reliable fitment and performance.
Powerflex Performance Front and Rear Control Arm Bushing kit (2 Bushings) for Audi S3 (8L), 1.8T 20V Quattro engine, November 1998 - June 2003 The "Performance" range from industry leader Powerflex is designed for road/sport use, offering improved rigidity while maintaining comfort and a long service life. This kit corresponds to Part Number 9 (see below):
Silent-Blocks Powerflex PERFORMANCE Anti-torque for AUDI S3 (8L), 1.8T 20V Quattro engine from November 1998 to June 2003
Hybrid Turbo with dump valve for RENAULT Mgane 3 RS 2.0 16V - Estimated power: 330hpPlease provide us with the part number of the turbo (original or aftermarket) fitted to your vehicle.This turbo can be fitted in place of the original without any modifications.
Reinforced sintered metal rigid clutch disc with 4 pads, SACHS PERFORMANCE, 240mm diameter, 23 splines
KS Kolbenschmidt paper oil filter, reference 50 013 529 Features:Filter type: screw-in filter cartridge (with metal frame)Outer diameter: 76mmInner diameter: 62mmSealing ring diameter: 72mmThread: 3/4"-16 UNFTotal Height: 123mm Image for illustrative purposes only
FERODO DS2500 rear brake pads for BMW M3 (E46) including CSL from June 2000 to July 2006, 3.2 24V S54B32 engine
Sample - no commercial value / SAMPLE WITHOUT commercial VALUE. NSB CONCEPT. Fast shipping!
RC RACING manufactured in 304L stainless steel, with with welds and tight tolerances, allowing for easy installation in place of the original part.
silencer exhaust RC RACING for DS3 Corsa F 208 1.2i T 100CV 130CV partir 2020 from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: RC RACING Exhaust Silencer for CITROEN DS3 1 2T 100HP 130HP OPEL Corsa F PEUGEOT 208 from 2020 onwards.
High-quality Reinforced Crankshaft bearing studs ARP AUDI 2.5 TFSI DAZA DNWA RS3 TTRS (Reinforced Crankshaft studs ARP AUDI 2.5 TFSI DAZA) for reliable fitment and performance.
kit of 10 reinforced ARP M12x175 cylinder head studs, 137mm length
M6x100 drain screw with non-return valve Thread: M6x100 Material: Zinc-plated carbon steel Image for illustrative purposes only
RC RACING silencer made of 304L stainless steel, with wide welds and tight tolerances for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, manifold flange modification, vehicle/competition specifications, etc.).Not road legal.
ACL Race Series Trimetal Connecting Rod Bearing Set, Part Number 6B2640H, Size HX
ACL Race Series Trimetal Crankshaft Bearing Set 5M2167H
ACL Race Series 5M1857H Trimetal Crankshaft Bearing Set
ACL Race Series 5M1219H Trimetal Crankshaft Bearing Set
ACL Race Series 4M2633H Trimetal Crankshaft Bearing Set, Size HX
ACL Race Series Trimetal Connecting Rod Bearing Set, Part Number 4B2322H
ACL Race Series Trimetal Connecting Rod Bearing Set, Part Number 4B2166H, Size +0.25
ACL Race Series Trimetal Connecting Rod Bearing Set, Part Number 4B1925H
ACL Race Series Trimetal Connecting Rod Bearing Set, Part Number 4B1856H
Goodridge braided brake hose kit for BMW (F10) 5 Series all models (including M5) from 2011 onwards
GOODRIDGE aviation brake hose kit for RENAULT CLIO 4 RS 1.6T 200hp
GOODRIDGE braided brake hose kit for PEUGEOT RCZ-R
GOODRIDGE braided brake hose kit for JEEP Cherokee XJ 1992-2001
GOODRIDGE braided brake hose kit for ALFA ROMEO 4C 2013
HISPEC aluminum piston, 38.5mm diameter, for Monster 6 caliperSold individually
Reinforced clutch kit with damped sintered metal disc for PEUGEOT 205 GTI, 1.9 8V engine from 1987 to 1994
ATHENA reinforced cylinder head gasket bore 87.5mm for OPEL 2.0 16V X20XE
RC RACING stainless steel secondary intermediate pipe, 60mm diameter, for RENAULT SUPER 5 1.4 8V GT TURBO from 1985 to 1993
RC RACING Group N stainless steel silencer manufactured from 304L stainless steel, with wide welds and tight tolerances allowing for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, modification of manifold flange, vehicle/competition specifics,...
kit 6 reinforced flywheel screws ARP Pro Series, thread: M12x100, length: 20mmInstructions Photo no contractual
Known as "inter IRESA", here you will find the RC RACING TI-381S stainless steel exhaust mid-pipe, manufactured in Spain, for which NSB CONCEPT has been an official distributor since 2009
BMW E30 325i 1985-1993 Reinforced Sintered Metal Rigid 4-Shoe Clutch Disc SAFFA from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: Reinforced rigid sintered metal clutch disc 4 SAFFA pads for BMW E30 325i from 1985 1993.
SAFFA 4-pad sintered metal reinforced clutch disc for BMW E30 325i from 1985 to 1993
Reinforced SAFFA clutch mechanism for PEUGEOT 106 reinforced cushioning.Non-contractual photo
SAFFA reinforced clutch mechanism for PEUGEOT 104 from 1972 to 1988For disc diameter 180mmThe reinforced mechanisms have the same dimensions and tolerances as the series, but with pressure on the plate increased, as well as reinforced cushioning tabs. Non-contractual photo
FERODO DSUNO brake pads (set) for AP RACING CP5070 and CP5570 calipers
REDOX silicone water hose kit with 9 hose clamps for Lancia Delta II HF HPE, 2.0 16V Turbo engine from 1995 to 1998. Supplied with hose clamps.
