Skip to content
  • On order
Reinforced exhaust valves Toyota Supra 2JZ-GE 2JZ-GTE Reinforced exhaust valves Toyota Supra 2JZ-GE 2JZ-GTE

Reinforced exhaust valves Toyota Supra 2JZ-GE 2JZ-GTE

€281.66 (tax incl.)
€352.08 (tax incl.) -20%

Set of 12 reinforced exhaust valves for the Toyota 2JZ-GE and 2JZ-GTE.

  • Brands: FERREA, SUPERTECH
  • Engines: 2JZ-GE, 2JZ-GTE
  • Dimensions: 29 mm head (standard) or 30 mm, 5.97 or 5.98 mm stem
  • Material: special alloy, stainless steel, Super Alloy, Inconel or sodium filled Nimonic
F6099*12
0 in stock in France
ORDER TODAY, WE SHIP IN 5 - 15 DAYS
Pay in installments

Toyota engines covered

A 3 litre, 24-valve straight six, the 2JZ comes as the naturally aspirated 2JZ-GE and the twin-turbo 2JZ-GTE; the A80 Supra made it a tuning benchmark, and it also powers the Aristo, Chaser, Cresta, Crown, Mark II, Soarer, Altezza, Origin and Progres.

Toyota fits 12 exhaust valves 13715-46020, with a 29 mm head, a 5.97 mm stem and a 99.1 mm overall length. They take the hottest gases, all the more so when raised boost keeps them at high temperature for longer.

SUPERTECH and FERREA reinforced exhaust valves

On the 2JZ, the 12 exhaust valves take the hardest beating: their heads sit in the stream of combustion gases on its way to the turbos. Unboosted, the metal of that head runs between 760 and 870 °C; boosted, it passes 1,000 °C. To cool down, the valve relies first on its seat, which absorbs around 75 % of the heat, then on its guide, for around 20 %. An EV8-family steel, kept as a basis for comparison, offers 550 MPa at 600 °C and retains only 300 at 800 °C. Once boost or revs climb past what the stock part was designed for, the head softens, cups and no longer seals its seat properly.

Hence the switch to tougher materials on reinforced valves. FERREA lists its Super Alloy, a nickel-based alloy, plus its 6000 series in EV8 stainless steel whose stem is hard chromed. SUPERTECH brings three answers: a black nitrided stainless steel, surface-hardened to cope better with friction in the guide; an Inconel, a nickel superalloy rated at 860 MPa at 730 °C and 554 MPa at 815 °C, nearly 85 % above EV8 around 800 °C; and lastly a Nimonic version with a sodium-filled stem, which moves heat from the head down the stem.

At +1 mm, the head measures 30 mm instead of 29 mm, with stem and length untouched. With more flow area, the cylinder gets rid of burnt gases sooner, the engine breathes more freely and makes more power, while the 12 exhaust seats are reground to that diameter to match.

Exhaust valve technical specifications

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
F6099*12 FERREA Standard 29.0 mm 5.98 mm 99.1 mm EV8 stainless steel, hard chrome stem
F1499P*12 FERREA Standard 29.0 mm 5.98 mm 99.1 mm Super Alloy (nickel base)
TEVI-1014-12 SUPERTECH Standard 29.0 mm 5.97 mm 99.1 mm Inconel
F6097*12 FERREA +1 mm 30.0 mm 5.98 mm 99.1 mm EV8 stainless steel, hard chrome stem
F1497P*12 FERREA +1 mm 30.0 mm 5.98 mm 99.1 mm Super Alloy (nickel base)
TEVN-1016-12 SUPERTECH +1 mm 30.0 mm 5.97 mm 99.1 mm Black nitrided stainless steel
TEVI-1016-12 SUPERTECH +1 mm 30.0 mm 5.97 mm 99.1 mm Inconel
TEVI-1016-HS-12 SUPERTECH +1 mm 30.0 mm 5.97 mm 99.1 mm Sodium filled Nimonic

The F6099, F1499P and TEVI-1014 are standard size; the F6097, F1497P, TEVN-1016, TEVI-1016 and TEVI-1016-HS are +1 mm. FERREA valves have a 5.98 mm stem, SUPERTECH valves 5.97 mm.

Valve fitting

PartToyota originalReinforced
Collets 90913-03025 KPR-6T-ST
Valve stem seals 90913-02088 / 90913-02090 VS-TS6E-12
Valve guide GDE-T2JZ-E-12

When refitting the springs, check that the collets match the groove of the chosen part number.

With a 29 mm head the exhaust seats keep their factory size; with 30 mm the workshop machines the 12 seats to the new size.

Once the valves are in, the exhaust clearance is checked cold, 0.25 to 0.35 mm from the factory, and corrected with the shims of the solid tappets.

Technical guide

Our brands

SUPERTECH SUPERTECH works out of San Jose, California, where it has put its know-how into racing valvetrains for over 30 years. Its range spans valves, springs, guides and retainers in stainless, titanium or Inconel; each part is drawn for one engine, then proven in competition alongside reputed tuners.
FERREA FERREA came into being in 1978 at the initiative of Horacio Ferrea. Produced in Florida and Argentina, its valves in stainless steel, titanium or nickel superalloy fill hard-pushed street engines as much as dedicated race blocks, from circuit cars to drag machines.

How to choose

For each part number, check that the collets fit its groove properly before compressing the springs. The choice then comes down to two points: head diameter, which governs seat work, and material.

CriterionOption 1Option 2
Size Standard, 29 mm
The one to keep if the head's seats are still good: no regrinding is needed. FERREA F6099 in EV8 stainless and F1499P in Super Alloy, SUPERTECH TEVI-1014 in Inconel, all sold in sets of 12.
+1 mm, 30 mm
The enlarged head clears gases faster and the engine benefits (around 10 to 12 cfm for each millimetre of head); regrinding the seats wipes out their wear at the same time. FERREA F6097, F1497P; SUPERTECH TEVN-1016, TEVI-1016, TEVI-1016-HS.
Material EV8 stainless or black nitrided stainless
From FERREA, the 6000 series with hard chromed stem; from SUPERTECH, the TEVN-1016 with its wear-resistant nitrided surface. Suited to an unboosted 2JZ-GE or to a 2JZ-GTE whose boost stays close to stock.
Super Alloy, Inconel or sodium Nimonic
FERREA F1499P and F1497P, SUPERTECH TEVI-1014, TEVI-1016 and TEVI-1016-HS: nickel alloys that hold up at very high temperature, the ones to pick as soon as turbo pressure rises clearly.

When reinforced valves become necessary

  • Turbo pressure increased or a big single turbo fitted
  • 2JZ-GE converted to forced induction (favour Inconel or Super Alloy)
  • Sharper, higher-lift camshafts
  • Drift, drag racing or regular track outings
  • Head to recondition, damaged exhaust valves

Vehicle compatibility

ModelEngine codePowerYears
Supra (A8) 3.0 2JZ-GE / 2JZ-GTE 224-330 hp 1993-2002
Altezza (E1) 3.0 2JZ-GE 214 hp 2001-2005
Altezza Gita (E1) 3.0 2JZ-GE 214-220 hp 2001-2005
Aristo (S14) 3.0 2JZ-GE / 2JZ-GTE 230-279 hp 1990-1997
Aristo (S16) 3.0 2JZ-GE / 2JZ-GTE 231-280 hp 1997-2004
Chaser (X10) 3.0 2JZ-GE 220 hp 1996-2001
Chaser (X9) 3.0 2JZ-GE 220 hp 1992-1996
Cresta IV (X9) 3.0 2JZ-GE 220 hp 1992-1996
Cresta V (X10) 3.0 2JZ-GE 220 hp 1996-2001
Cresta V (X10) 3.0 Estate 2JZ-GE 220 hp 1996-2001
Crown (S13, S14) 3.0 2JZ-GE 220-230 hp 1991-1995
Crown (S15) 3.0 2JZ-GE 220 hp 1995-2001
Crown (S17) 3.0 2JZ-GE 220 hp 1999-
Mark II (X1, V2) 3.0 Estate 2JZ-GE 226 hp 1996-2001
Mark II VI 3.0 2JZ-GE 230 hp 1992-1996
Mark II VIII (X10) 3.0 2JZ-GE 220 hp 1996-2001
Origin (JCG1) 3.0 2JZ-GE 214 hp 2000-2001
Progres (JCG1) 3.0 2JZ-GE 215 hp 1998-2004
Soarer (Z3) 3.0 2JZ-GE 226-230 hp 1990-2000

OEM part number (exhaust valve): 13715-46020

Important: one set of 12 covers a complete engine. The Lexus GS 300, IS 300 and SC 300 have their own page, and the direct injection 2JZ-FSE is not covered here.

Don't forget the inlet valves

While the 2JZ cylinder head sits on the bench, plan to change its inlet valves as well and to fit new stem seals. The part numbers for your engine:

Inlet valves 2JZ →

16 other products in the same category

Viewed products

Loading...