Skip to content
  • On order
Reinforced inlet valves LANCIA Delta Integrale 16V Alfa 155 Q4 Reinforced inlet valves LANCIA Delta Integrale 16V Alfa 155 Q4

Reinforced inlet valves LANCIA Delta Integrale 16V Alfa Romeo 155 Q4

€245.82 (tax incl.)
€307.27 (tax incl.) -20%

Set of 8 reinforced inlet valves for the LANCIA Delta HF Integrale 16V and Evoluzione and ALFA ROMEO 155 Q4.

  • Brand: SUPERTECH
  • Engines: 831 D5.000, 831 E5.000, AR67203 (2.0 16V turbo)
  • Dimensions: 34.4 mm head, 7 mm stem, 128.8 mm length
  • Material: stainless steel
LIVN-1001-8
On order, 15 to 30 days lead time
Pay in installments

LANCIA and ALFA ROMEO engines covered

The 831 D5.000 and 831 E5.000 are the 2 litre 16-valve turbo four-cylinders of the Lancia Delta HF Integrale: 196 hp on the 16V from 1989 to 1991, then 205 to 215 hp on the Evoluzione I and II, from 1991 to 1994. The AR67203 is the 2 litre turbocharged four-cylinder with 16 valves and twin overhead camshafts of the Alfa Romeo 155 Q4, the four-wheel-drive saloon built from 1992 to 1997 and derived from the Lancia Delta HF Integrale running gear.

The cylinder head carries 8 inlet valves. Raised boost, sharper camshafts or rally and hill climb use put more load on their heads and seats than road driving.

SUPERTECH reinforced inlet valves

On the 2 litre turbo of the Delta HF Integrale and the Alfa Romeo 155 Q4, each of the 8 inlet valves dips down to feed the chambers with air pressurised by the turbo, then returns home with a sharp click, its stem travelling up and down the guide without a single pause. Once the engine is on the cam, this dance repeats dozens of times a second. The part sits between 400 and 550 °C, yet a standard chrome-silicon steel then holds only 500 MPa at 500 °C and just 250 MPa at 600 °C, losing 50 % of its strength barely past its range. More boost and more revs only deepen this wear.

SUPERTECH cuts the LIVN-1001-8 from stainless steel and keeps the engine's stock measurements: 34.4 mm head, 7 mm stem, 128.8 mm length. Offered at the standard size, it goes onto freshly reground seats, with no machining to a larger diameter, and takes the place of valves marked by turbo pressure, hours on special stages or high mileage.

Inlet valve technical specification

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
LIVN-1001-8 SUPERTECH Standard 34.4 mm 7 mm 128.8 mm Stainless steel

LIVN-1001-8: 34.4 mm head, 7 mm stem and 128.8 mm length, standard size.

Fitting details

PartoriginalReinforced
Collets
Valve stem seals
Valve guide

On reassembly, check that the collets sit properly in the groove of the SUPERTECH valves and replace any that are marked.

Supplied at the standard size, these valves only need the seats reground, with no cutting to a larger diameter.

Technical guide

The brand offered

SUPERTECH SUPERTECH has made San Jose, California, its workshop for more than 30 years: the brand produces valve train parts for racing engines there, valves first. Each design targets a precise cylinder head, undergoes ultrasound, radiography and laser checks, then is confirmed with engine builders.

How to choose

The groove, machined near the stem tip, houses the collets that hold the retainer in place; a single version exists for this 2 litre turbo:

CriterionOption 1Option 2
Size Standard, 34.4 mm
Seats kept at their stock diameter, simply refreshed. LIVN-1001-8.

When reinforced valves become necessary

  • Boost pressure raised or larger turbo
  • Sharper camshafts or stiffened springs
  • Red line moved beyond stock
  • Head prepared for special stages, hill climbs or circuit
  • Stock valves fatigued or seats already reground

Compatible vehicles

ModelEngine codePowerYears
ALFA ROMEO 155 (167) 2.0 16V Turbo Q4 AR67203 1992-1997
LANCIA Delta I (831) 2.0 16V HF Integrale (831AB.026) 831 D5.000 196 hp 1989-1991
LANCIA Delta I (831) 2.0 16V HF Evo Integrale (831AB.000) 831 E5.000 205 hp 1991-1994
LANCIA Delta I (831) 2.0 16V HF Evo I Integrale (831.AB) 831 E5.000 209 hp 1991-1992
LANCIA Delta I (831) 2.0 16V HF Evo Integrale (831AB.027) 831 E5.046 / 831 E5.000 211 hp 1993-1994
LANCIA Delta I (831) 2.0 16V HF Evo II Integrale (831.AB) 831 E5.000 215 hp 1993-1994
Important: one set of 8 covers a complete engine. This page covers the Delta HF Integrale 16V , the Evoluzione (831 D5.000, 831 E5.000) and the Alfa Romeo 155 Q4 (AR67203); the 8V Delta Integrale (831 B5, 831 C5) and the Delta II 2.0 16V Turbo are not covered.

Related products

While the head of this 2 litre turbo is off, also check its 8 exhaust valves: we offer them as reinforced parts too, through the button below:

LANCIA Delta Integrale 16V HF exhaust valves →

13 other products in the same category

Viewed products

Loading...