Skip to content
  • On order
LANCIA 2.0 8V/16V Delta HF Integrale Coussinets de bielles Tri-metal KING RACE, Cote ORIGINE LANCIA 2.0 8V/16V Delta HF Integrale Coussinets de bielles Tri-metal KING RACE, Cote ORIGINE

Trimetal connecting rod bearings 50.8 mm Alfa Romeo Fiat Lancia 1.8 2.0

€83.71 (tax incl.)
€93.01 (tax incl.) -10%

Set of 8 trimetal connecting rod half-bearings for Alfa Romeo, Fiat and Lancia 1.8 and 2.0 (Ø 50.8 mm).

  • Brand and treatment: ACL Race, King Racing
  • Compatibility: Alfa Romeo 145, 146, 147, 155, 156, 166, GTV, Spider, GT ; Fiat Coupé, Barchetta, Punto, Brava, Bravo, Marea, Stilo, Tipo, Tempra, Croma ; Lancia Delta, Dedra, Thema, Lybra
  • Available sizes: standard to +0.25 mm, increased-clearance version (HX)
CR4601XP
On order, 15 to 30 days lead time
Pay in installments

The Alfa Romeo, Fiat and Lancia 1.8 and 2.0 litre four-cylinder engines

These 1.8 and 2.0 litre four-cylinder engines, most of them 16-valve, power Alfa Romeo models (145, 146, 147, 155, 156, 166, GTV, Spider, GT), Fiat models (Coupé, Barchetta, Punto, Brava, Bravo, Marea, Stilo, Tipo, Tempra, Croma) and Lancia models (Delta, Dedra, Thema, Lybra), including the 2.0 16V Turbo of the Fiat Coupé and the Lancia Delta and the 2.0 16V of the Delta HF Integrale. ACL and King list the same bearing set for these engines: a single set covers the family.

From the factory, these engines are fitted with standard production connecting rod bearings, sized for the loads of the original engine: as soon as power, engine speed or boost pressure increase, they reach their limits.

Trimetal connecting rod bearings

In a trimetal bearing, a steel back carries a copper-lead intermediate layer with high load capacity, itself covered by an anti-friction running layer that spares the crankpin. The set is supplied complete: 8 half shells, i.e. 4 pairs.

Trimetal targets high, sustained loads, whereas aluminium bi-metal is limited to low to medium loads: about 8,000 psi for the latter, up to 12,000 psi for a performance trimetal, 50% more. The benefit shows in strength and durability on turbo, supercharged and high-revving engines.

Technical specifications

Fitment dimensions common to all references
ACL / King bearings
Crankpin Ø 50.787 / 50.807 mm (King : 50.79 / 50.81 mm)
Housing bore Ø 53.897 / 53.913 mm (King : 53.90 / 53.91 mm)
Width 19.5 mm (King : 19.6 mm)
ReferenceBrand and treatmentSizeWall thickness (mm)
4B2904H-STD ACL Race - Untreated Standard 1.536
4B2904HX-STD ACL Race - Untreated Std, increased clearance (HX) 1.523
4B2904H-.025 ACL Race - Untreated +0.025 1.5485
4B2904H-.25 ACL Race - Untreated +0.25 1.661
CR4601XP King Racing - Untreated Standard 1.536
CR4601XP.026 King Racing - Untreated +0.026

Running clearance

Running clearance is the gap between the bearing and the crankpin, filled by the oil film.

While the engine turns, the crankpin floats on this oil film, which carries the load without direct contact with the bearing. Film thickness depends on clearance: too tight, oil passes poorly, temperature rises and the risk of seizure grows; too wide, oil escapes, the film carries less and oil pressure decreases. A correct clearance ensures both sufficient lubrication and a well-maintained film.

Size / gradeWhen to choose itACL Race SeriesKing XP
Standard (STD) Standard journal, not reground 0.054 to 0.064 mm 0.051 mm
Increased clearance (HX) Wider clearance: high oil flow, high rpm 0.079 to 0.089 mm
+0.025 / +0.026 / +0.25 mm Journal reground to 0.025 / 0.026 / 0.25 mm 0.054 to 0.064 mm 0.051 mm

Checking on assembly: lay a calibrated strip (Plastigauge) on the journal, torque the rod cap to spec, then compare the crushed strip against the gauge to read the clearance.

Plastigauge

Order the Plastigauge →

Technical guide

These ACL and King trimetal connecting rod bearings are aimed at built engines and racing: where a standard bearing quickly reaches its limit, they accept more power, more rpm and more boost. The range includes the standard size, a +0.025 / +0.026 mm size for a crankpin that has only been polished, a +0.25 mm regrind size and the HX version with increased clearance for high-revving engines or engines needing a high oil flow. It allows the same part number to be kept after the crankshaft is reground and the clearance to be tailored to the oil used and the engine's duty.

The two brands

ACL An Australian specialist in high-performance engine bearings since 1949, ACL Bearing Company produces the Race Series: precisely made trimetal bearings, available in numerous sizes and recognised on built engines across the world.
King Racing Since the 1960s, Israel's King Engine Bearings has built high-performance engine bearings; its pMax Black trimetal alloy bearings are sized for heavy loads.

Construction and advantages

Criterion ACL Race Series King Racing
Cross-section Cross-section of an ACL Race Series trimetal bearing Cross-section of a King Racing trimetal bearing
Type High-performance trimetal bearing High-performance trimetal bearing
Country of manufacture Australia Israel
Construction Trimetal: steel back, copper layer, soft surface Trimetal: steel back, copper layer, soft surface
Alloy Race Series (copper-lead) pMax Black (hardened copper-lead)
Protective coating No No
Available sizes Standard to +0.25 mm (+ increased clearance HX) Standard and +0.026 mm

Vehicle compatibility

This connecting rod bearing set fits the engines of the following Alfa Romeo, Fiat and Lancia models:

BrandModel (chassis)Engine codePowerYears
ALFA ROMEO 145 (930_) 1.8 i.e. 16V (930.A1A) / 1.8 i.e. 16V T.S. (930.A1A) / 2.0 16V (930.A5) / 2.0 16V T.SPARK (930.A5) AR 32201, AR 32301, AR 38401, AR 67106, AR 67199, AR 67204 140–155 hp 1995–2001
ALFA ROMEO 146 (930_) 1.8 i.e. 16V T.S. (930.B1A) / 2.0 16V (930.B5) / 2.0 16V T.S. (930.B5) AR 32201, AR 32301, AR 38401, AR 67106, AR 67204 140–155 hp 1995–2001
ALFA ROMEO 147 (937_) 2.0 16V T.SPARK (937.AXA1, 937.AXC1, 937.BXC1) AR 32310 150 hp 2001–2010
ALFA ROMEO 155 (167_) 1.7 T.S. 16V (167.A4N) / 2.0 16V Turbo Q4 (167.A2B, 167.A2C, 167.A2E) / 2.0 T.S. 16V (167.A2G) AR 67106, AR 67203, AR 67204, AR 67299 140–190 hp 1992–1997
ALFA ROMEO 156 (932_) 1.8 16V T.SPARK (932.A3) / 1.8 16V T.SPARK (932.A3100) / 2.0 16V T.SPARK (932A2) / 2.0 16V T.SPARK (932A21__) AR 32201, AR 32205, AR 32301, AR 32310 140–155 hp 1997–2005
ALFA ROMEO 156 Sportwagon (932_) 1.8 16V T.SPARK (932A3) / 1.8 16V T.SPARK (932B31__) / 2.0 16V T.SPARK (932A2) / 2.0 16V T.SPARK (932B21__) AR 32201, AR 32205, AR 32301, AR 32310 140–155 hp 1997–2006
ALFA ROMEO 166 (936_) 2.0 T.Spark (936A3A__) / 2.0 T.Spark (936A3B00) AR 34103, AR 36301 150–155 hp 1998–2007
ALFA ROMEO GTV (916_) 1.8 16V (916C3) / 2.0 T.SPARK 16V (916.C2__, 916C2C00) / 2.0 T.SPARK 16V (916C2C) AR 16201, AR 32201, AR 32301, AR 32310 144–155 hp 1995–2005
ALFA ROMEO SPIDER (916_) 1.8 16V (916S3) / 2.0 T.SPARK 16V (916S2B) / 2.0 T.SPARK 16V (916S2C00) AR 16201, AR 32201, AR 32301, AR 32310 144–155 hp 1995–2005
ALFA ROMEO GT (937_) 1.8 TS (937CXR1A) AR 32205 140 hp 2003–2010
FIAT BARCHETTA (183_) 1.8 16V 183 A1.000, 188 A6.000 130 hp 1995–2005
FIAT COUPE (175_) 1.8 16V / 2.0 16V / 2.0 16V Turbo 175 A1.000, 183 A1.000, 836 A3.000 131–190 hp 1993–2000
FIAT BRAVO I (182_) 1.8 GT (182.AC) 182 A2.000 113 hp 1995–2001
FIAT BRAVA (182_) 1.8 16V / 1.8 GT 16V (182.BC) 182 A2.000, 183 A1.000 113–132 hp 1995–2003
FIAT MAREA (185_) 1.8 / 1.8 115 16V 182 A2.000, 183 A1.000 113–132 hp 1996–2007
FIAT MAREA Weekend (185_) 1.8 / 1.8 115 16V 182 A2.000, 183 A1.000 113–132 hp 1996–2007
FIAT PUNTO (188_) 1.8 130 HGT (188.738, .718) 183 A1.000, 188 A6.000 130 hp 1999–2012
FIAT STILO (192_) 1.8 16V / 1.8 16V (192AXC1A, 192BXC1A) 192 A4.000 122–133 hp 2001–2007
FIAT STILO Multi Wagon (192_) 1.8 16V 192 A4.000 133 hp 2003–2008
FIAT TEMPRA (159_) 2.0 16V 154 E1.000 132 hp 1994–1998
FIAT TIPO (160_) 1.8 i.e.16V Sport 160 A5.000 136 hp 1989–1992
FIAT CROMA (154_) 2000 16V / 2000 i.e. (154.AD) / 2000 i.e. (154.AM, 154.LM) 154 C3.000, 154 C3.046, 154 E1.000 116–137 hp 1987–1996
LANCIA DEDRA (835_) 1.8 16V LE (835FG) / 1.8 GT 16V (835EH) / 2.0 16V (835ED) / 2.0 i.e. (835AI) / 2.0 i.e. (835AL) / 2.0 i.e. Turbo (835AR) / 2.0 Turbo (835AQ) 182 A2.000, 183 A1.000, 835 A5.000, 835 A5.046, 835 A8.000, 835 A8.046, 836 A3.000 113–177 hp 1989–1999
LANCIA DEDRA SW (835_) 1.8 16V LE (835FG) / 1.8 GT 16V (835EH) / 2.0 16V (835ED) / 2.0 Integrale (835ED) 182 A2.000, 183 A1.000, 836 A3.000 113–139 hp 1994–1999
LANCIA DELTA I (831_) 2.0 16V HF Evo I Integrale (831.AB) / 2.0 16V HF Evo II Integrale (831.AB) / 2.0 16V HF Evo Integrale (831AB.000) / 2.0 16V HF Evo Integrale (831AB.027) / 2.0 16V HF Integrale (831AB.026) 831 D5.000, 831 E5.000, 831 E5.046 196–215 hp 1989–1994
LANCIA DELTA II (836_) 1.8 i.e. 16V (836AQ) / 1.8 i.e. 16V GT (836AR) / 2.0 16V (836AA, 836CA) / 2.0 16V Turbo (836AB) / 2.0 16V Turbo (836AS) 175 A4.000, 182 A2.000, 183 A1.000, 836 A2.000, 836 A3.000 113–193 hp 1993–1999
LANCIA LYBRA (839_) 1.8 16V (839AXB1A, 839AXG1A) 839 A4.000, 839 A7.000, 839 A9.000 131 hp 1999–2005
LANCIA LYBRA SW (839_) 1.8 16V (839BXB1A, 839BXG1A) 839 A4.000, 839 A7.000 131 hp 1999–2005
LANCIA THEMA (834_) 2000 16V (834FA) / 2000 16V Turbo (834AC) / 2000 16V Turbo (834GC, 834FC) / 2000 i.e. 16V (834AA) / 2000 i.e. 16V (834AI) / 2000 i.e. 16V Turbo (834AL) 834 B2.000, 834 B2.246, 834 C1.000, 834 C1.246, 834 F1.000, 834 F2.000 141–201 hp 1988–1994
LANCIA THEMA SW (834_) 2000 16V (834FA) / 2000 i.e. 16V (834AA) / 2000 i.e. 16V (834AI) / 2000 i.e. 16V Turbo (834AC) / 2000 i.e. 16V Turbo (834AL) / 2000 Turbo 16V (834GC, 834FC) 834 B2.000, 834 B2.246, 834 C1.000, 834 C1.246, 834 F1.000, 834 F2.000 141–201 hp 1988–1994

Why replace the bearings

Replacing the bearings during a build or rebuild guards against the most expensive failure: a worn-out connecting rod bearing scores the crankpin, contaminates the oil circuit with debris and forces at least a crankshaft regrind, or even a new rod and block. Against such costs a new set weighs little: it is the cheapest part of the rotating assembly, but the one whose failure costs the most.

12 other products in the same category

Viewed products

Loading...