- On order
Reinforced exhaust valves Mitsubishi 4G63
Set of 8 reinforced exhaust valves for the Mitsubishi 4G63.
- Brands: FERREA, SUPERTECH
- Engine: 4G63 2.0 16V
- Dimensions: 30.5 mm head (standard) or 31.5 mm, 6.54 or 6.55 mm stem
- Material: stainless steel, Super Alloy, Inconel or Nimonic
Mitsubishi engines covered
The 4G63 is the Mitsubishi 2 litre, 16-valve twin-cam four, naturally aspirated or turbocharged (4G63T); it built the reputation of the Eclipse and above all the Lancer Evolution, in rallying as well as road tuning.
It has 8 exhaust valves, two per cylinder, with a 30.5 mm head and a stem of about 6.5 mm. On turbo versions they live with very hot burnt gases, all the more so when boost is raised.
SUPERTECH and FERREA reinforced exhaust valves
Every time it opens, the 4G63 exhaust valve lets burnt gases that are still extremely hot escape towards the manifold. Measured in the metal, its head reaches 760 to 870 °C without forced induction and passes 1,000 °C once the turbo is boosting. It cools mainly by contact: close to 75 % of the heat flows into the seat and some 20 % into the guide. An EV8 type valve steel, used here as a benchmark, still offers 550 MPa at 600 °C but drops to 300 MPa around 800 °C. As boost pressure, load or rpm climb, the head heats up, tires, warps and in the end stops sealing.
To cope with these temperatures, the reinforced versions turn to other metals. SUPERTECH offers black nitrided stainless steel, whose hardened and smoothed layer limits friction and wear, then Inconel, a nickel superalloy that keeps 860 MPa at 732 °C and 554 MPa at 816 °C, nearly 85 % more than EV8 steel around 800 °C; its Nimonic version, another nickel alloy, has a hollow sodium filled stem that carries heat from the head to the guide. FERREA offers two ranges: the 6000 series in EV8 stainless steel with a hard chrome stem, and the Competition Plus in Super Alloy, for which the brand claims 20 % more hot strength and a seat that lasts 25 % longer.
The +1 mm references keep the stem and length of their standard size version but carry a 31.5 mm head instead of 30.5 mm. The gas passage widens, the cylinder purges faster and fills better, which benefits power. The 8 exhaust seats are then machined to this diameter.
Exhaust valve technical specifications
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| F6025*8 | FERREA | Standard | 30.5 mm | 6.55 mm | 109.7 mm | EV8 stainless steel, hard chrome stem | |
| F1825P*8 | FERREA | Standard | 30.5 mm | 6.55 mm | 109.7 mm | Super Alloy (nickel base) | |
| MEVN-1007-8 | SUPERTECH | Standard | 30.5 mm | 6.54 mm | 109.6 mm | Black nitrided stainless steel | |
| MEVI-1007-8 | SUPERTECH | Standard | 30.5 mm | 6.54 mm | 109.6 mm | Inconel | |
| F6054*8 | FERREA | +1 mm | 31.5 mm | 6.55 mm | 109.7 mm | EV8 stainless steel, hard chrome stem | |
| F1454P*8 | FERREA | +1 mm | 31.5 mm | 6.55 mm | 109.7 mm | Super Alloy (nickel base) | |
| MEVN-1009-8 | SUPERTECH | +1 mm | 31.5 mm | 6.54 mm | 109.6 mm | Black nitrided stainless steel | |
| MEVI-1009-8 | SUPERTECH | +1 mm | 31.5 mm | 6.54 mm | 109.6 mm | Inconel | |
| MEVI-1009-HS-8 | SUPERTECH | +1 mm | 31.5 mm | 6.54 mm | 109.6 mm | Sodium filled Nimonic |
F6025, F1825P, MEVN-1007 and MEVI-1007 are standard size; F6054, F1454P, MEVN-1009, MEVI-1009 and MEVI-1009-HS are +1 mm. FERREA valves have a 6.55 mm stem and a 109.7 mm length, SUPERTECH valves 6.54 mm and 109.6 mm.
Valve fitting
| Part | Mitsubishi original | Reinforced |
|---|---|---|
| Collets | K10035 | |
| Valve stem seals | VS-M6.6E-8 | |
| Valve guide | GDE-MI66-STE-8 |
When refitting the springs, check that the collets fit the groove of the chosen valve, and replace any that are marked.
A 30.5 mm head sits on the exhaust seats at their factory size; a 31.5 mm head requires the 8 seats to be machined by the workshop.
FERREA and SUPERTECH valves differ by 0.1 mm in length: one set of 8 is fitted from a single brand.
Technical guide
Our brands
| SUPERTECH, a company born in Silicon Valley, has spent more than thirty years developing valves, springs, guides and titanium retainers for racing. Each of its valves, in stainless steel, titanium or Inconel, is drawn for one specific engine and then proven with drag racing, rally and circuit engine builders. | |
| FERREA Racing Components came to life in 1978 thanks to Daniel Urrutia and Horacio Ferrea. Its plants in Florida and Argentina produce valves in stainless steel, nickel superalloy or titanium, fitted by engine builders all over the planet, from NASCAR ovals to drag strips. |
How to choose
All of these valves fit the 4G63; what remains is the head size, which decides whether the seats must be machined, then the material, matched to the power you are after and to whether a hard pushed turbo is fitted.
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Standard size, 30.5 mm The right choice when the exhaust seats of the head are in good condition and have never been recut: the valve goes in with no machining. |
+1 mm oversize, 31.5 mm A head one millimetre larger lets more gas through, around 10 to 12 cfm per millimetre: the cylinder empties faster and takes in more fresh air, and power benefits. The seats are recut to this larger diameter, which also rescues seats that have already been reground. |
| Material | Black nitrided or EV8 stainless steel For a naturally aspirated 4G63 or a turbo engine kept close to its factory boost. The treated surface reduces stem and seat wear. SUPERTECH offers black nitrided stainless steel, FERREA its 6000 series with a hard chrome stem. |
Super Alloy, Inconel or sodium filled Nimonic Nickel alloys keep their strength when the head goes past 800 °C: these are the versions to pick as soon as boost rises or the engine runs long at full load. The sodium filled Nimonic, in +1 mm only, takes heat away to the guide even better. |
When reinforced valves become necessary
- Higher boost or a larger turbo (nickel alloy version recommended)
- Sharper camshafts or stiffer springs
- Rev limit raised
- Rebuild of a rally, circuit or hillclimb cylinder head
- Burnt, pitted or warped original exhaust valves
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| Eclipse I (D2_A) 2.0 16V / 2.0 Turbo | 4G63 / 4G63T | 1989-1995 | |
| Eclipse II (D3_A) 2000 GS 16V / Turbo 16V | 4G63 / 4G63T | 1994-1999 | |
| Lancer VII (CT9A) EVO VIII | 4G63T | 2003-2007 |
OEM part number (exhaust valve):
Don't forget the inlet valves
A 4G63 cylinder head that comes off goes back on with new parts: renew the 8 inlet valves and the valve stem seals too when fitting the exhaust side. See here:
| Inlet valves 4G63 → |
| Mitsubishi 4G63T valve spring kit → |
-
Brand
-
ReferenceF6025*8