Categories
Manufacturers
Categories
Camshaft Catcams / Kent CAMS Adjustable Pulleys for Engine1.8 / 2.0 16V F7R 700, F7R 710, F7R 714, F7P 700, F7P 704, F7P 722:RENAULT 19 1989 - 1996RENAULT Clio 1 1991 - 1996RENAULT Clio Williams 1994 - 1998RENAULT Megane 1 1996 - 2003
PAC-D99891 CATCAMS Reinforced Double Valve Spring?
CATCAMS mechanical pushrods, reference CC010, outer diameter: 37.47mm - Price per unit
DASH10 / AN10 Male-to-Male Bulkhead Fitting (JIC 7/8")
135A REDOX silicone elbow, 22mm inner diameter, 100x100mm length
Reinforced head gasket Athena / Cometic forBMW engine 3.0/3.2 24V S50B30 S50B32:BMW M3 E36 1992 - 1999BMW Z3M E36 1997 - 2001
HONDA 1.6 16V D16A1/2/8/9 DOHC ZC Reinforced head gasket Cometic HONDA CRX ED9 CIVIC ED7, Bore 75.5mm.
COOL IT thermal insulation for starter motor, supplied with clampsDimensions: 180 x 560 mm
SACHS clutch release bearing for PEUGEOT 207 RC 1.6 16V 174hp 02/2007- Photo for illustrative purposes only
ACL Race Series Tri-Metal Crankshaft Bearing Set for Mitsubishi Lancer Evo Outlander Galant Startwagon 2.0 2.4
Goodridge brake hose kit consisting of 6 hoses.
B48 forged pistons (BMW/MINI/Toyota): Table O82.83, RV 9.5:1 to 11:1, pin 22, CH 33.2. JE, Wossner, Supertech ranges. Engine and vehicle compatibility + OEM references.
Stainless steel female/female sleeve, 45mm inner diameterSleeve dimensions:Length: 75mm
RC RACING stainless steel intermediate pipe with flame arrester for RENAULT 19 1.8 16V R19 16S 137hp 89-92
kit 6 forged ZRP / MANLEY / BOOSTLINE connecting rods for BMW 3.0 24V N54B30 double vanos biturbo:BMW 135 i / 1M E82 / E88 2007 - 2013BMW 335 i E90 / E91 / E92 / E93 2006 - 2012BMW Z4 3.0 i E89 2009 - 2016References: R-BMW-018-I, 14078-6, BM5708-866
High-quality Gaskets tail Valves 7mm Intake BMW M50 S50B30 S38B36 S38B38 (Gaskets tail Valves 7mm Intake BMW M50 S50B30) for reliable fitment and performance.
MISHIMOTO SPAL type 410mm 3740m3/h 12V extra-flat fan
PEUGEOT 205 GTI 309 GTI Hard anti-torque silent block type PEUGEOT SPORT
VIBRA-TECHNICS reinforced engine mount and transmission mount for VW Golf 2:VW Golf 2 1983 - 1992
Silicone reducer 90A REDOX, inner diameter 22-25mm, length 100x100mm
RC RACING Africa pipe/decatalytic converter made of 304L stainless steel, with wide welds and tight tolerances allowing for easy installation in place of the original part.
45A REDOX aluminum elbow, 45mm outer diameter, 140x140mm length
Short straight banjo, screw bore: 3/8", outlet: UNF-JIC 7/16" (DASH4)
RC RACING stainless steel decat pipe/catalyst made from 304L stainless steel, with wide welds and tight tolerances for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, modification of manifold flange, vehicle/competition specifics, etc.).NOT APPROVED...
Steel Exhaust Manifold Flange PSA 1.9 16V XU9J4 for 309 GTI16 405 MI16 BX GTI 16 160HP
Africa pipe / RC RACING stainless steel decatalyzer for PEUGEOT 306 2.0 8V XSI 123hp 94-
RC RACING decat pipe/Africa pipe made of 304L stainless steel, with wide welds and tight tolerances for easy installation in place of the original part.As an Official Distributor, we can offer custom manufacturing (modification of pipe and outlet diameter, manifold flange modification, vehicle/competition specifics, etc.).Not road legal.
High-quality Reinforced Intake valves PSA C4 VTS 206 RC 307 EW10J4S (Reinforced Intake valves PSA C4 VTS 206 RC) for reliable fitment and performance.
Aluminum sleeve, 57mm outer diameter, REDOX, with T-junction dump valve, 25mm diameter, 100mm length
Aluminum sleeve, 35mm outer diameter, REDOX with T-junction, dump valve, 25mm diameter, 100mm length
RC RACING stainless steel primary intermediate pipe for PEUGEOT 206 1.6 16V 2000-
M18x150 adapter - 5mm diameter hose or 200/210 DASH4 hose, aluminum seal included
PSA 1.6 16V Clutch Release Bearing Saxo VTS/106/205/206 16S
Intake air temperature probe/sensor
POWERFLEX silent block for anti-torque for RENAULT CLIO Williams and CLIO II RS PHASE 1 172hp
90A silicone elbow, REDOX, 85mm inner diameter, 125x125mm length
Bouchon Stant for circuit cooling 1.22 1.49 Bar. NSB CONCEPT. Fast shipping!
RC RACING manufactured in 304L stainless steel, with wide welds and tight tolerances, allowing for easy installation in place of the original part.
DASH10 235mm 44-row matrix oil cooler, color: BLACK
4-in-1 stainless steel manifold distributed by IRESA and manufactured by RC RACING.NOT APPROVED FOR ROAD USE.RESERVED FOR GROUP N COMPETITION USE.
Female ball Gasket, left-hand thread - 14mm diameter - M14 thread
Supertech Valve Guides for2.0 TFSI EA113 and EA888 engineAUDI A1 / S1 8XAUDI A3 / S3 8P / 8VAUDI A4 B8AUDI TT / TTS 8J / FVKTM X-Bow / GT4 / GT / R / RRSEAT Leon / Cupra R 1PSEAT Leon / Cupra 5FSEAT / CUPRA Leon KLVW Golf 5 GTIVW Golf 6 / GTI / RVW Golf 7 GTI / ClubSport / ClubSport S / TCR / RVW Golf 8 GTIVW New BeetleVW Polo R WRC 6RVW Scirocco 3 / R
65mm - silencer stainless POWERSPRINT weld, corps 125mm, length 250mm from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: Universal stainless steel silencer POWERSPRINT weldable with pipes 65mm outer diameter 250mm length 125mm body.
RC RACING stainless steel exhaust pipe for PEUGEOT 106 1.4 8V TU3JP 75hp 2000-2004
High-quality Reinforced Timing belt Kent CAMS EW10J4 EW10J4S Peugeot Citroen (Reinforced Timing belt Kent CAMS EW10J4 EW10J4S Peugeot) for reliable fitment and performance.
2.0 16V ABF forged pistons: Bore 82.5 mm, Pin 21 mm, CH 31.6 mm. Rings included. Compatibilities Golf 3 GTI 16V, Passat B4, SEAT Ibiza/Cordoba/Toledo 150 hp.
kit of 2 three-hole steel flanges for weld-on fittings for 63.5mm diameter tubing, w/ gasket and screws from NSB CONCEPT. Genuine performance automotive part. Fast shipping. Key specs: kit 2 flanges 3 holes 63 5mm weld Information Flange material ST37 steel Gasket aluminum 5754 Dimensions see photo Delivered.
Symmetrical conical stainless steel reducer, diameter 127-60.3mm, length 100mm, thickness 1.5mm
RC RACING stainless steel exhaust with dual 73mm outlets for SMART Roadster 452 0.7 M160 82hp 04/2003-11/2005This RC RACING 304L stainless steel exhaust fits directly in place of the original, without modification.
VIBRA-TECHNICS reinforced engine mount and gearbox mount for AUDI A1 Quattro and S1:AUDI A1 Quattro 2012AUDI S1 2014 - 2018
REDOX straight silicone reducer, internal diameters 70-90mm, length 125mm
COOL IT Black Graphite Thermal Insulation Tape for Exhaust, 25.4mm wide, 4.572M longGeneric Photo
2 in 1 (Y) aluminum 2x101.6mm / 1x152.4mm - REDOX
ACL Race Series Trimetal Connecting Rod Bearing Set, Part Number 4B1972H
Set 6 InJEctors FUEL INJECTOR CLINIC large flow rates BMW E36 325i M50 M3 3.0 3.2 S50 S52
Fiber-to-metal gasket for compensator, 45mm diameterGasket dimensions:Inner diameter: 46mmThickness: 13mm