Skip to content
  • In stock
Reinforced inlet valves AUDI 2.5 TFSI DAZA Reinforced inlet valves AUDI 2.5 TFSI DAZA

Reinforced inlet valves AUDI RS3 TT RS RS Q3 2.5 TFSI DAZA

€301.59 (tax incl.)
€376.99 (tax incl.) -20%

Set of 10 reinforced inlet valves for the AUDI 2.5 TFSI DAZA.

  • Brands: SUPERTECH, FERREA
  • Engine: DAZA (RS3 8V, TT RS FV, RS Q3 F3)
  • Dimensions: 33.85 mm, 33.90 mm, 34.85 mm or 34.90 mm head, 6 mm stem
  • Material: black nitrided stainless steel with single groove, or stainless steel with hard chrome stem and 3 grooves
VWIVN-1002S-10
1 in stock in France
1 in stock in Europe (72h lead time)
Pay in installments

AUDI engines covered

The DAZA is Audi's 2.5 litre five-cylinder with direct injection and turbocharger, rated at 400 hp. It powers the 8V generation RS3 Sportback and saloon from 2017 to 2020, the TT RS FV coupé and roadster from 2016, then the RS Q3 and RS Q3 Sportback of the F3 generation from 2019.

With four valves per cylinder, it has 10 inlet valves. Audi part 06L 109 601 has a 33.85 mm head, a 6 mm stem and a length of 104 mm, with valve stem seal 057 109 675. Remapping, higher boost pressure or track use: every upgrade adds heat and impact loads that these valves take on their seats.

SUPERTECH and FERREA reinforced inlet valves

On the DAZA, each of the 10 inlet valves lets through the air compressed by the turbo, closes by hitting its seat and runs constantly through its guide; its working temperature lies between 400 and 550 °C. In that zone, the chromium-silicon grade of an ordinary valve falls from 500 MPa at 500 °C to 250 MPa at 600 °C, and 50 % of its strength goes. Once weakened, the valve distorts, marks its seat, leaks, and cylinder compression drops.

At SUPERTECH, the stainless steel receives black nitriding: the stem gains a harder skin and wears more slowly against the guide. At FERREA, the Competition Plus valves pair stainless steel and a chrome-plated stem; compared with a conventional stainless valve, they show 20 % more hot and fatigue strength and 25 % longer life on the seat. Both makers keep the 6 mm stem and 104 mm length of the Audi part, so the standard guides stay in place.

At +1 mm, VWIVN-1004S-10 grows from 33.85 to 34.85 mm and F2420P*10 from 33.90 to 34.90 mm, with stem and length untouched. The pressurised air crosses a more generous area at the seat, each cylinder takes in more charge and power climbs, once the 10 inlet seats are reworked to the larger diameter. For grooves, SUPERTECH works with 1 groove and FERREA with 3, each with matching collets.

Inlet valve technical specification

Part numberBrandSizeHead Ø
OEM 33.85 mm
Stem Ø
OEM 6 mm
Length
OEM 104 mm
GroovesMaterial
VWIVN-1002S-10 SUPERTECH Standard 33.85 mm 6 mm 104 mm 1 Stainless steel, black nitrided
VWIVN-1004S-10 SUPERTECH +1 mm 34.85 mm 6 mm 104 mm 1 Stainless steel, black nitrided
F2419P*10 FERREA Standard 33.90 mm 6 mm 104 mm 3 Stainless steel, hard chrome stem
F2420P*10 FERREA +1 mm 34.90 mm 6 mm 104 mm 3 Stainless steel, hard chrome stem

Fitting details

PartAUDI originalReinforced
Collets
Valve stem seals 057 109 675 VS-VBM6I-10
Valve guide GDE-AU18T

The SUPERTECH valves have a single groove and are fitted with single groove collets for a 6 mm stem; the FERREA valves have three and take 3 groove collets. The collets are therefore chosen with the valve part number.

At 33.85 or 33.90 mm, the valves sit on seats reconditioned to the factory size; at 34.85 or 34.90 mm, the inlet seats are machined to the diameter of the new head.

The Audi inlet valve stem seals are part number 057 109 675; they are replaced together with the valves.

Technical guide

The brands offered

FERREA Horacio Ferrea and Daniel Urrutia founded FERREA Racing Components in 1978. The company produces valves in Florida and Argentina, forged in one block and then finished under numerical control, from stainless steel up to nickel-based superalloys; they power NASCAR and dragster engines.
SUPERTECH Based in California, SUPERTECH Performance has drawn and machined competition valves, springs and guides for three decades and more, in stainless steel, Inconel or Nimonic. Ultrasound, X-rays and laser check each of its batches.

How to choose

The number of grooves, cut at the stem tip to lock the collets, sets which collets to fit; on the DAZA, choose the size first, then that number.

CriterionOption 1Option 2
Size Factory size, 33.85 or 33.90 mm
The valves sit on seats restored to factory size, with no work on the head: the answer for a rebuild or a sensible tune. SUPERTECH offers it as VWIVN-1002S-10, FERREA as F2419P*10, both in sets of 10. The 6 mm stem and 104 mm length match Audi.
+1 mm, 34.85 or 34.90 mm
About 10 to 12 cfm of extra flow per millimetre of head, against machining the 10 inlet seats to the larger diameter; the job also recovers seats already reground. References VWIVN-1004S-10 and F2420P*10.
Grooves 3 grooves (FERREA)
Fitting close to Audi's, with new 3-groove collets advised; suits road and track alike, the lower groove remaining the most stressed area of the stem. References F2419P*10 and F2420P*10.
1 groove (SUPERTECH)
A single groove means a less notched stem that holds up better at high revs; the collets clamp the stem on that one groove and must be 1-groove collets. References VWIVN-1002S-10 and VWIVN-1004S-10.

When reinforced valves become necessary

  • Remap with raised boost or a bigger turbo
  • Sharper camshafts or uprated valve springs
  • Rev limit raised beyond the Audi value
  • Head overhauled for circuit work, drift or rally
  • Tired Audi valves or seats already reground

Compatible vehicles

ModelEngine codePowerYears
A3 Sportback (8V) RS3 quattro DAZA 400 hp 2017-2020
A3 Limousine (8V) RS3 quattro DAZA 400 hp 2017-2020
TT (FV) 2.5 RS TFSI quattro DAZA 400 hp 2016-
TT Roadster (FV) 2.5 RS TFSI quattro DAZA 400 hp 2016-
Q3 (F3) 2.5 RS TFSI quattro DAZA 400 hp 2019-
Q3 Sportback (F3) 2.5 RS TFSI quattro DAZA 400 hp 2019-

OEM part number (inlet valve): 06L 109 601

Important: one set of 10 covers the 10 inlet valves of the DAZA. The 2.5 TFSI CEPA, CEPB and CZGB (RS3 8P, TT RS 8J, RS3 8V up to 2016) and the DNWA are not listed for these part numbers and are not covered by this page.

Related products

With the 2.5 TFSI head open, it is a good moment to renew the DAZA exhaust valves and inlet stem seals as well; both are listed below:

Audi 2.5 TFSI DAZA exhaust valves →
Audi 2.5 TFSI inlet valve stem seals →

15 other products in the same category

Viewed products

Loading...