Skip to content
  • In stock
VAG 5 cyl 2.2/2.3 Audi 80/100/A6/RS2 Arbres a cames Catcams VAG 5 cyl 2.2/2.3 Audi 80/100/A6/RS2 Arbres a cames Catcams

SUPERTECH bronze valve guides VAG 1.8T 20V 2.5 TFSI

€200.70 (tax incl.)
€250.87 (tax incl.) -20%

Set of 20 valve guides for VAG 1.8T 20V and 2.5 TFSI, 6 mm stem.

  • Brand: SUPERTECH
  • Engines: 1.8T 20V (AEB, AGU, AUQ, BAM...), 2.5 TFSI (CEPA, CEPB, CZGB, DAZA)
  • Material: manganese bronze
  • Dimensions: outside diameter 11.045 mm, length 36.15 mm
GDE-AU18T-20
1 in stock in France
For larger quantities, 5 to 15 days lead time
Available in stock in France
Pay in installments

Applicable VAG engines

This set fits the 20-valve cylinder head of two families of VAG engines: the 1.8-litre turbo 20V (AEB, AGU, AJQ, AMK, APY, AUQ, BAM and their variants), found in the Audi A3, A4, A6 and TT, the SEAT Ibiza Cupra, Leon and Toledo, the Skoda Octavia and Superb, the VW Golf IV, Bora, New Beetle, Passat and Polo GTI, and the five-cylinder 2.5 TFSI (CEPA, CEPB, CZGB, DAZA) of the Audi RS3 and TT RS.

The 1.8T has five valves per cylinder on four cylinders, the 2.5 TFSI four valves on five cylinders: either way 20 valves, each guided by a part pressed into the aluminium head. According to SUPERTECH, the bore is 6.0 mm, the standard outside diameter is 11.045 mm and the length is 36.15 mm, on the inlet and exhaust sides alike.

SUPERTECH manganese bronze valve guides

The guide holds each valve on the axis of its seat, carries part of the stem's heat away to the head and supports the stem seal. As it wears, the valve gains play, tilts and closes poorly: oil runs down the stem, smoke turns blue, oil consumption climbs and compression drops.

SUPERTECH's manganese bronze, a copper-based alloy, conducts heat much better, according to the brand, than the sintered guides fitted as standard. The set gathers the 20 guides of a head: the same reference serves inlet and exhaust, in standard size. They are most often paired with reinforced valves.

Valve guide technical specifications

Part numberBrandMaterialStem ØOutside ØLength
GDE-AU18T-20 SUPERTECH Manganese bronze 6.0 mm 11.045 mm 36.15 mm

Valve guide installation

PartOriginalReinforced
Valve guide Replaced by the kit
Valves Inlet / Exhaust

Technical guide

Reinforced valves from the catalogue for the 1.8T 20V, 6 mm stem:

Inlet valves VAG 1.8T 20V →
Exhaust valves Audi VW 1.8T 20V →

The brand offered

SUPERTECH SUPERTECH is a California company based in Silicon Valley, active in competition for over thirty years. It designs valves, springs, retainers and guides by finite element calculation, checks them by ultrasound, X-ray and laser, then has engine builders validate them.

Manganese bronze

A copper and zinc based alloy, this bronze receives manganese, aluminium and iron. It offers high mechanical strength, wears slowly and resists corrosion, which suits it to bushes and guiding parts under heavy load.

When valve guides must be replaced

  • Oil running down the valve stems
  • Reinforced valves to fit in a worn cylinder head
  • Circuit, drift or rally cylinder head to rebuild
  • Valve train renewed from end to end

Vehicle compatibility

ModelEngine codePowerYears
Audi A3 (8L) AGU, AJQ, AMK, APP, APY, AQA, ARX, ARY, ARZ, AUL, AUM, AUQ, BAM 150-224 hp 1996-2003
Audi A3 Sportback RS3 (8P) CEPA 340 hp 2011-2012
Audi A3 RS3 (8V) CZGB, DAZA 367-400 hp 2015-2020
Audi A4 B5 (8D) berline et Avant AEB, AJL, ANB, APU, ARK, AWT 150-180 hp 1995-2001
Audi A4 B6 (8E) berline et Avant AVJ, BEX, BFB 150-190 hp 2000-2004
Audi A4 B6 (8H) Cabriolet BFB 163 hp 2002-2005
Audi A4 B7 (8E) berline, Avant et Cabriolet BFB 163 hp 2004-2009
Audi A6 C5 (4B) berline et Avant AEB, AJL, ANB, APU, ARK, AWT 150-180 hp 1997-2005
Audi Q3 RS (8U, F3) CZGB, DAZA 367-400 hp 2015-
Audi TT (8N) coupé et Roadster AJQ, APP, APX, ARY, AUM, AUQ, AWP, BAM 150-224 hp 1998-2006
Audi TT RS (8J) coupé et Roadster CEPA, CEPB 340-360 hp 2009-2014
Audi TT RS (FV) coupé et Roadster DAZA 400 hp 2016-
SEAT Ibiza II (6K) et Cordoba Cupra AQX, AYP 156-180 hp 2000-2002
SEAT Ibiza III (6L) Cupra R BBU 180 hp 2004-2008
SEAT Leon (1M) et Toledo II (1M) AJQ, AMK, APP, ARY, AUQ, BAM 180-225 hp 1999-2006
Skoda Octavia I (1U) berline et Combi AGU, ARX, ARZ, AUM, AUQ 150-180 hp 1997-2010
Skoda Superb I (3U) AWT 150 hp 2001-2008
VW Golf IV (1J) berline et Variant AGU, AQA, ARZ, AUM, AUQ, AWP 150-180 hp 1997-2006
VW Golf IV GTI (9B) AUQ 179-193 hp 2007-2010
VW Bora (1J) berline et Variant AGU, ARX, AUM, AUQ, AWP 150-180 hp 2000-2005
VW New Beetle (9C) et Cabriolet AGU, APH, AVC, AWP, AWU, AWV 150-180 hp 1999-2010
VW Passat B5 et B5.5 (3B) berline et Variant AEB, ANB, APU, AWT 150 hp 1996-2005
VW Polo GTI (9N) BBU 180 hp 2006-2009

Important: these guides also suit the 20-valve heads fitted on KR, PL, ABF and ABA blocks; other 16 or 8 valve VAG engines belong to other listings.

Think about the valve stem seals

New guides go hand in hand with new stem seals, since the seal is carried by the guide and holds back the oil along the stem.

16 other products in the same category

Viewed products

Loading...