- In stock
Reinforced exhaust valves Audi RS3 TT RS RS Q3 2.5 TFSI DAZA
Set of 10 reinforced exhaust valves for the Audi 2.5 TFSI DAZA.
- Brands: SUPERTECH, FERREA
- Engine: DAZA (RS3 8V, TT RS FV, RS Q3)
- Dimensions: 28, 29 or 30 mm head, 6 mm stem
- Material: Inconel or sodium filled Inconel, single groove or 3 grooves
Audi engines covered
The DAZA is the 400 hp version of Audi's 2.5 TFSI five-cylinder. It powers the RS3 8V from 2017, the TT RS FV from 2016 and the RS Q3 of the F3 generation.
With four valves per cylinder it has 10 exhaust valves. The Audi part 079 109 611 G has a 28 mm head, a 6 mm stem and a length of 101.9 mm. On an engine so often remapped, the exhaust side already works under a heavy thermal load as standard.
SUPERTECH and FERREA reinforced exhaust valves
The DAZA five-cylinder pushes its burnt gases towards the turbine through 10 exhaust valves, which live through the hottest phase of the cycle. On the metal side, their head goes past 1,000 °C on this turbo engine, while it tops out between 760 and 870 °C on a naturally aspirated unit. The head cools first and foremost through its seat, for about 75 %, and for roughly 20 % through the guide. Taking the EV8 steel family as reference, strength drops from 550 MPa at 600 °C to 300 MPa at 800 °C. With more boost, revs and load, the head heats up, loses its strength, warps and then leaks at the seat.
To absorb these temperatures, reinforced valves use superalloys. All the SUPERTECH valves offered here are in Inconel, a nickel alloy keeping 860 MPa at 732 °C and 554 MPa at 816 °C, a lead of nearly 85 % over EV8 steel near 800 °C; the HS version also gets a hollow sodium filled stem, liquid from 97.8 °C, which drains the heat stored in the head off to the guide. The FERREA valves belong to the Competition Plus series, cast in a Super Alloy with a high nickel content, which claims 20 % additional thermal strength and 25 % longer seat life.
Two oversizes exist: +1 mm, with a 29 mm head, and +2 mm, with 30 mm; stem and length remain identical. A larger head gives a wider flow area, the cylinder empties faster towards the turbo, fills better and gains power. The 10 exhaust seats must then be cut to the chosen diameter.
Exhaust valve technical specifications
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| VWEVI-1002S-10 | SUPERTECH | Standard | 28.0 mm | 6 mm | 101.8 mm | 1 | Inconel |
| VWEVI-1002S-HS-10 | SUPERTECH | Standard | 28.0 mm | 6 mm | 101.8 mm | 1 | Sodium filled Inconel |
| VWEVI-1004S-10 | SUPERTECH | +1 mm | 29.0 mm | 6 mm | 101.8 mm | 1 | Inconel |
| VWEVI-1006S-10 | SUPERTECH | +2 mm | 30.0 mm | 6 mm | 101.8 mm | 1 | Inconel |
| F2417P*10 | FERREA | Standard | 28.0 mm | 6 mm | 102.0 mm | 3 | Super Alloy (nickel base) |
| F2418P*10 | FERREA | +1 mm | 29.0 mm | 6 mm | 102.0 mm | 3 | Super Alloy (nickel base) |
Valve fitting
| Part | Audi original | Reinforced |
|---|---|---|
| Collets | KPR-6S-7 (single groove) | |
| Valve stem seals | 06L 109 675 D | VS-VBM6E-10 (exhaust) |
| Valve guide | GDE-AU18T |
The SUPERTECH valves have a single groove, the FERREA valves three: the collets are chosen according to the part number selected.
At 28 mm, the Audi size, the exhaust seats are simply checked; at 29 or 30 mm they are recut to the valve diameter.
The Audi exhaust valve stem seals carry part number 06L 109 675 D.
Technical guide
Our brands
| SUPERTECH, founded in the heart of Silicon Valley, has worked for motorsport for three decades: springs, valves, titanium retainers and guides. Stainless steel, titanium or Inconel: the material of its valves is set engine by engine, then validated in the field by rally, circuit and drag racing tuners. | |
| FERREA Racing Components got going in 1978, driven by the Urrutia and Ferrea duo. Its Florida and Argentina workshops shape valves in stainless steel, titanium and nickel superalloys, sought after by engine builders, in NASCAR or drag racing. |
How to choose
Housed against the retainer, the collets bite into the grooves cut on the stem. With one single groove or with three of them, the grip on the valve is different, and so are the advantages it brings to the engine.
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Standard size, 28 mm If the cylinder head has sound, never touched exhaust seats, this size goes in as it is, without machining, from both manufacturers. |
+1 or +2 mm oversize, 29 or 30 mm A wider head opens the passage further: around 10 to 12 cfm per millimetre, a cylinder that purges faster towards the turbo and draws in extra fresh air, to the benefit of power. Seats to be machined to the chosen diameter; also recovers seats already recut. The +2 mm only exists from SUPERTECH. |
| Grooves | Single groove Pinched by its collets, the stem relieves its groove while the wider bearing curbs friction: stiff springs, large lift and high rpm are handled better. This is how every SUPERTECH valve is held, with or without sodium, advised for a heavily tuned DAZA. KPR-6S-7 collets required, preferably new. |
3 grooves The stem turns freely between its collets. Adequate for a mildly modified road DAZA; new collets advised. Weak point: each time the valve lands, it loads the lower groove, the more fragile one. FERREA's only solution for this engine. |
When reinforced valves become necessary
- Remap pushing boost pressure (Inconel version advised)
- Larger turbo or a hybrid turbo flowing more
- More aggressive camshafts or valve springs
- Intensive circuit driving or repeated track days
- Factory exhaust valves scored, burnt or worn
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| RS3 (8V) | DAZA | 400 hp | 2017-2020 |
| TT RS (FV) | DAZA | 400 hp | 2016- |
| RS Q3 (F3) | DAZA | 400 hp | 2019- |
OEM part number (exhaust valve): 079 109 611 G
Don't forget the inlet valves
When the 2.5 TFSI cylinder head is off, it is sensible to swap the inlet side and its valve stem seals at the same time. Find the inlet valve page here:
| Audi 2.5 TFSI inlet valves → |
-
Brand
-
ReferenceVWEVI-1002S-10