CITROEN Visa

Manufacturers

CITROEN Visa

CITROEN Visa

CITROEN Visa 

There are 8 products.

Subcategories

  • CITROEN Visa GT 79hp XY8 1982-1991
    CITROEN Visa GT 79hp XY8 1982-1991

    This page brings together the uprated engine parts available for the 1.4 8V XY8 fitted to the CITROEN Visa GT built from 1982 to 1991. It lists the CATCAMS sport camshaft, offered in four reference profiles, and the CATCAMS performance valve spring kit designed for the same block. The rotating assembly is covered by ACL RACE and KING RACING tri-metal big end bearings, available in standard size, extra clearance and +0.30mm and +0.50mm repair sizes, together with the ACL thrust washers that control crankshaft end float.

  • CITROEN Visa GTI 103hp XU5J 1985-1986
    CITROEN Visa GTI 103hp XU5J 1985-1986

    This page brings together the uprated engine parts for the 1.6 8V XU5J fitted to the CITROEN Visa GTI of the 1985 and 1986 model years. Forged pistons are offered in the JE PISTONS FSR and WÖSSNER ranges, in 83mm, 83.5mm and 84mm bores and compression ratios from 11.5:1 to 12.8:1. Valve gear is served by the CATCAMS sport camshaft, the CATCAMS kit of eight dual valve springs with sixteen retainers, and CATCAMS and KENT CAMS vernier cam pulleys. ACL RACE and KING RACING tri-metal big end bearings and ACL thrust washers complete the rotating assembly.

Showing 1 - 8 of 8 items
CITROEN Visa

The CITROEN Visa category covers engine parts for the XU5J (GTI, 1985-1986) and XY8 (GT, 1982-1991) petrol engines, listed below by variant.

  • CATCAMS sport camshafts, specific to each engine (XU5J for the GTI, XY8 for the GT)
  • CATCAMS reinforced valve springs and vernier cam pulleys
  • Tri-metal big end and side bearings

Two engine variants are listed below to narrow your search.