- In stock
Reinforced exhaust valves Renault Clio Williams F7R
Set of 8 reinforced exhaust valves for the Renault Clio Williams.
- Brands: SUPERTECH, CATCAMS
- Engine: F7R 700 2.0 16V
- Dimensions: 28.45 mm or 28.8 mm head, 7 mm stem
- Material: black nitrided stainless steel (SUPERTECH)
Renault engines covered
The F7R is Renault's 2 litre, 16-valve, twin overhead camshaft four-cylinder; in its F7R 700 version it powers the Clio Williams from 1994 to 1998.
The cylinder head carries 8 exhaust valves, two per cylinder. The original valve (7700 865 551) has a 28.3 mm head and a 7 mm stem; it takes the heat of the burnt gases on every cycle, all the more on an engine revved hard.
SUPERTECH and CATCAMS reinforced exhaust valves
On the F7R of the Clio Williams, the exhaust valve opens on every cycle onto a still scorching flow, and it bears the highest thermal load in the cylinder head. Through its mass, the head reaches 760 to 870 °C on this engine without a turbo; adding boost would send it beyond 1,000 °C. About 75 % of that heat crosses the seat, close to 20 % the guide. As a yardstick for the factory part, EV8-family steel drops from 550 MPa at 600 °C to only 300 MPa at 800 °C. Pushing revs or load raises heating further; over time the head gives in to fatigue, loses its flatness and closes less well.
The reinforced versions work on the alloy and the surface finish. SUPERTECH makes the REVN-28070 from heat-resistant stainless steel, nitrided black: the treatment forms a tough, slick outer skin that protects the stem and slows its wear against the guide. CATCAMS for its part offers the 9255004M, with a 28.8 mm head and a 7 mm stem like the original, supplied as a set of 8 to fit out the whole cylinder head. Neither belongs to the nickel superalloys: for this unboosted engine, the offer centres on a treated stainless steel on one side and a valve close to factory dimensions on the other.
The two heads measure 28.45 mm from SUPERTECH and 28.8 mm from CATCAMS, against 28.3 mm on the original part; length differs too, 110.1 mm versus 109.0 mm. The exhaust seats are reworked during the rebuild, to the size of the chosen head, to regain full contact.
Exhaust valve technical specifications
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| REVN-28070-8 | SUPERTECH | 28.45 mm | 6.97 mm | 110.1 mm | Black nitrided stainless steel | ||
| 9255004M*8 | CATCAMS | 28.8 mm | 7 mm | 109.0 mm |
The REVN-28070-8 and the 9255004M*8 are two complete sets for the F7R 700; they differ by head and length.
Valve fitting
| Part | Renault original | Reinforced |
|---|---|---|
| Collets | KK7 | |
| Valve stem seals | 7700736465 | |
| Valve guide | 7700743529 |
The 9255004M is fitted with KK7 collets; with the REVN-28070, check that the collets engage properly in the groove before releasing the springs.
The original guides (7700743529) take a 7 mm stem: check their clearance and replace the valve stem seals (7700736465) at every reassembly.
The exhaust seats are recut during the rebuild, to the size of the chosen head, for full contact.
Technical guide
Our brands
| SUPERTECH, located in San Jose, California, has developed racing valvetrains for over 30 years, from the valves themselves to springs, guide sleeves and retainers machined in titanium. Every valve targets a given engine and is validated in competition with recognised tuners. | |
| CATCAMS, a Belgian manufacturer, sets the lift laws of its camshafts itself, then grinds them on CNC machines, and also makes valve springs and retainers. Its range further includes tappets and adjusting shims; its camshafts have made their mark in British touring cars and in endurance racing at Le Mans. |
How to choose
The collets, kept tight by the retainer, hold the valve securely in place. Both sets suit the F7R 700: they differ in brand, surface finish, head diameter and overall length, all points to check before reassembly.
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Brand | SUPERTECH REVN-28070-8 in black nitride stainless steel, 28.45 mm head. Thanks to its nitrided layer, the stem copes better with friction against the guide: a sound choice for a Clio Williams that is often revved hard, on the road as in rallying, with no other engine conversion. |
CATCAMS 9255004M as a set of 8, 28.8 mm head and 7 mm stem like the original. For anyone wanting an F7R 700 true to factory spec, this is the part number to choose; it goes with KK7 collets, ideally new. |
| Stem and length | SUPERTECH, 6.97 mm 6.97 mm stem and 110.1 mm length, i.e. 1.1 mm more than the CATCAMS. Before releasing the springs, check that the collets engage properly in the groove; also measure the stem to guide clearance, as the stem is slightly thinner. |
CATCAMS, 7 mm 7 mm stem and 109.0 mm length. The original 7 mm guides take it directly if they are within tolerance; replace the valve stem seals at every rebuild and rework the seats to the head size. |
When reinforced valves become necessary
- Camshafts changed for more aggressive profiles, stiffened valve springs
- Rev limit raised
- F7R fitted with a turbocharger or supercharger
- Rally, hill climb or regular circuit outings
- Head rebuilt after wear or pitting of the exhaust valves
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| Clio I (B/C57_, 5/357_) Williams (B/C57M) | F7R 700 | 147 hp | 1994-1998 |
| Clio I (B/C57_, 5/357_) Williams | F7R 700 | 150 hp | 1994-1996 |
OEM part number (exhaust valve): 7700 865 551
Don't forget the inlet valves
When rebuilding the F7R cylinder head, plan to replace the inlet valves too, with a full set of new stem seals fitted alongside. Those for the Clio Williams:
| Inlet valves Renault Clio Williams F7R → |
-
Brand
-
ReferenceREVN-28070-8