- In stock
Reinforced inlet valves RENAULT Clio Williams F7R700
Set of 8 reinforced inlet valves for the RENAULT Clio Williams F7R700.
- Brands: SUPERTECH, CATCAMS
- Engine: F7R700 (2.0 16V)
- Dimensions: 33 mm or 33.3 mm head, 6.97 to 7 mm stem
- Material: black nitrided, dished head
RENAULT engines covered
The F7R700 is Renault's 2.0 litre, 16-valve, twin-cam four-cylinder fitted to the Clio Williams, built from 1994 to 1998 in 147 and 150 hp versions.
Its cylinder head carries 8 original inlet valves 7700 865 550, with a 33 mm head and a 7 mm stem. Sharper camshafts, stiffer springs or a higher rev limit for racing expose them to more heat and impact.
SUPERTECH and CATCAMS reinforced inlet valves
On the Clio Williams' F7R700, each inlet valve admits the fresh charge then blocks its way, dozens of times each second once revs climb, slapping back onto its seat face while sliding in its guide. It operates between 400 and 550 °C; within that interval, the chrome-silicon steel of a conventional valve sinks from 500 MPa at 500 °C to 250 MPa near 600 °C, i.e. strength cut by 50 %.
The SUPERTECH RIVN-28069-8 is black nitrided, hardening the stem surface and delaying its wear against the guide; its head is concave and its stem lightened just under the head. The CATCAMS 9255003M*8 keeps the original part's 7 mm stem.
The CATCAMS takes the head to 33.3 mm, 0.3 mm over factory size, which means recutting the 8 inlet seats to this diameter.
Inlet valve technical specification
| Part number | Brand | Size | Head Ø OEM 33 mm | Stem Ø OEM 7 mm | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| RIVN-28069-8 | SUPERTECH | Standard | 33 mm | 6.97 mm | 108.9 mm | Black nitrided, dished head | |
| 9255003M*8 | CATCAMS | +0.3 mm | 33.3 mm | 7 mm | 107.5 mm |
Fitting details
| Part | RENAULT original | Reinforced |
|---|---|---|
| Collets | ||
| Valve stem seals | 7700736465 | |
| Valve guide | 7700743529 |
The 33 mm RIVN-28069-8 fits on seats reconditioned to the factory size; the 33.3 mm 9255003M needs seats recut to its diameter.
Fit all 8 valves from the same set and replace the inlet valve stem seals at the same time.
Technical guide
The brands offered
| A Californian racing valvetrain specialist for more than thirty years, SUPERTECH Performance forges and machines its valves, designing each model for one specific engine, then inspects every batch by ultrasound, radiography and laser before handing it to tuners for drag or circuit work. | |
| Renowned for its rally and circuit camshafts, CATCAMS designs and produces in Europe the matching valvetrain components: valves, springs and tappets, each component thought out for a given engine and for units prepared for motorsport. |
How to choose
The collets sit in the groove cut at the stem tip and so hold the upper retainer. On the F7R700 the choice rests on two criteria: size, then brand.
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Standard, 33 mm For seats still at factory size. |
+0.3 mm, 33.3 mm Seats to be recut to this diameter. |
| Brand | SUPERTECH Black nitride, concave head, 108.9 mm long. |
CATCAMS 7 mm stem, 107.5 mm long. |
When reinforced valves become necessary
- Sharper camshafts or stiffened valve springs
- Rev cut moved beyond stock
- Supercharger or turbo grafted onto the engine
- Head prepared for rally, hillclimb or circuit use
- Factory valves tired, or head seats already recut
Compatible vehicles
| Model | Engine code | Power | Years |
|---|---|---|---|
| Clio I Williams | F7R 700 | 150 hp | 1994-1996 |
| Clio I Williams (B/C57M) | F7R 700 | 147 hp | 1994-1998 |
OEM part number (inlet valve): 7700 865 550
Related products
With the F7R700 head removed, take the opportunity to change its 8 exhaust valves as well; we offer equivalent reinforced parts for this engine:
| RENAULT Clio Williams F7R exhaust valves → |
-
Brand
-
ReferenceRIVN-28069-8