- In stock
Crankshaft thrust washers Renault F4R F7R F7P
Crankshaft thrust washers for the Renault F4R, F7R, F7P and related engines.
- Brands: ACL
- Fits: Renault Clio, Mégane, Laguna, Scénic, Espace, R19, Duster
- Engine codes: F1N, F2N, F2R, F3N, F3P, F3R, F4P, F4R, F5R, F7P, F7R
Renault F family engines
The Renault petrol engines F1N, F2N, F2R, F3N, F3P, F3R, F4P, F4R, F5R, F7P and F7R power the Renault 19, Clio, Mégane, Laguna, Scénic, Espace and Duster, among others. For these engines, the manufacturer lists a single thrust washer part number, offered in standard size and in 0.10 mm oversize, uncoated. These Renault inline four-cylinder engines have a cast-iron block, an aluminium cylinder head and a toothed-belt-driven overhead camshaft: 8 valves for the F1x, F2x and F3x, 16 valves for the F4x, F5x and F7x.
Thrust washers
The thrust washers take the clutch thrust and set the crankshaft end float. On a modified engine with a reinforced clutch, this thrust increases. The uncoated ACL version is offered in the original size and in an oversize of 0.10 mm.
The crankshaft is held between these half washers, which limit its movement along its axis. Each time the clutch is disengaged, the clutch thrust pushes it against them, and the thrust face then works on a thin oil film. Once worn, they let the end float grow: the crankshaft moves and its own thrust faces get damaged in turn.
Technical specifications
| Part number | Brand and treatment | Size | Inner Ø (mm) | Outer Ø (mm) | Thickness (mm) | Material |
|---|---|---|---|---|---|---|
| 1T7807-STD | ACL - Uncoated | Standard | 62.500 / 62.750 | 79.750 / 80.000 | 2.35 | - |
| 1T7807+.10 | ACL - Uncoated | +0.10 mm | - | - | - | - |
| ACL Identical halves (“Half type: Identical halves”) |
Technical guide
Only one face of each half washer carries lubrication grooves: it goes against the crankshaft, the plain face against the block or cap. Fitted the other way round, the washer no longer lubricates the crankshaft's thrust face, which then wears very quickly.
On assembly, coat the crankshaft-side face with assembly grease, make sure the half washers seated in the block sit flush, then fit the cap without forcing it and tighten it following the manufacturer's procedure. Finally measure the end float with a dial gauge and check it against the manufacturer's value.
The brand
![]() |
ACL Bearing Company, an Australian manufacturer of high-performance engine bearings since 1949, supplies uncoated thrust washers for these engines. |
Construction and advantages
| Criterion | ACL |
| Presentation | Identical halves |
| Country of manufacture | Australia |
| Material | |
| Coating | No |
| Available sizes | Standard, +0.10 mm |
Vehicle compatibility
These thrust washers fit the Renault F4R, F7R, F7P and related engines (engine codes F1N, F2N, F2R, F3N, F3P, F3R, F4P, F4R, F5R, F7P, F7R) of the following vehicles:
| Brand | Model (chassis) | Engine code | Power | Years |
|---|---|---|---|---|
| Renault | 11 (B/C37_) | F2N, F3N | 73-94 hp | 1983-1988 |
| Renault | 19 I (B/C53_) | F2N, F3N, F3P, F7P | 73-137 hp | 1988-1994 |
| Renault | 19 I Cabriolet (D53_) | F2N, F3N, F7P | 75-137 hp | 1991-1992 |
| Renault | 19 I Chamade (L53_) | F2N, F3N, F7P | 73-137 hp | 1988-1992 |
| Renault | 19 II (B/C53_) | F3N, F3P, F7P | 73-141 hp | 1992-2001 |
| Renault | 19 II Cabriolet (D53_, 853_) | F3N, F3P, F7P | 88-137 hp | 1992-2001 |
| Renault | 19 II Chamade (L53_) | F2N, F3N, F3P, F7P | 73-137 hp | 1992-2001 |
| Renault | 21 (B48_) | F2N, F3N | 73-90 hp | 1989-1994 |
| Renault | 21 Saloon (L48_) | F2N, F3N | 73-95 hp | 1986-1994 |
| Renault | 21 Estate (K48_) | F2N, F3N | 73-94 hp | 1986-1993 |
| Renault | 9 (L42_) | F2N, F3N | 73-94 hp | 1984-1989 |
| Renault | Alliance Saloon | F2N | 73 hp | 1983-1986 |
| Renault | Avantime (DE0_) | F4R | 163 hp | 2001-2003 |
| Renault | Captur I (J5_, H5_) | F4R | 133-148 hp | 2016 |
| Renault | Clio I (B/C57_, 5/357_) | F2N, F3P, F7P, F7R | 88-150 hp | 1991-1999 |
| Renault | Clio II (BB_, CB_) | F4R | 169-179 hp | 2000-2009 |
| Renault | Clio III (BR0/1, CR0/1) | F4R | 197-200 hp | 2006-2014 |
| Renault | Duster (HM_) | F4R | 143 hp | 2021-2024 |
| Renault | Duster (HS_) | F4R | 133-148 hp | 2011-2020 |
| Renault | Espace III (JE0_) | F3R, F4R | 114-140 hp | 1996-2002 |
| Renault | Espace IV (JK0/1_) | F4R | 133-170 hp | 2002-2015 |
| Renault | Fluence (L3_) | F4R | 180-190 hp | 2011 |
| Renault | Grand Scénic II (JM0/1_) | F4R | 135-163 hp | 2004-2009 |
| Renault | Kaptur (H5_) | F4R | 143 hp | 2016 |
| Renault | Laguna Coupe (DT0/1) | F4R | 170-204 hp | 2008-2015 |
| Renault | Laguna I (B56_, 556_) | F3P, F3R, F4P, F4R | 90-140 hp | 1993-2001 |
| Renault | Laguna I Grandtour (K56_) | F3P, F3R, F4P, F4R | 90-140 hp | 1995-2001 |
| Renault | Laguna II (BG0/1_) | F4P, F4R, F5R | 116-204 hp | 2001-2007 |
| Renault | Laguna II Grandtour (KG0/1_) | F4P, F4R, F5R | 116-204 hp | 2001-2007 |
| Renault | Laguna III (BT0/1) | F4R | 170-204 hp | 2007-2015 |
| Renault | Laguna III Grandtour (KT0/1) | F4R | 170-204 hp | 2007-2015 |
| Renault | Megane CC (EZ0/1_) | F4R | 180 hp | 2010-2015 |
| Renault | Megane I (BA0/1_) | F3R, F4P, F7R | 109-147 hp | 1996-2003 |
| Renault | Megane I Cabriolet (EA0/1_) | F3R, F4R, F5R, F7R | 109-150 hp | 1996-2003 |
| Renault | Megane I Classic (LA0/1_) | F3R, F4P, F4R, F5R | 109-152 hp | 1996-2006 |
| Renault | Megane I Coach (DA0/1_) | F3R, F4R, F5R, F7R | 109-150 hp | 1996-2003 |
| Renault | Megane I Grandtour (KA0/1_) | F4P | 115 hp | 2001-2003 |
| Renault | Megane II (BM0/1_, CM0/1_) | F4R | 135-230 hp | 2002-2009 |
| Renault | Megane II Saloon (LM0/1_) | F4R | 135-140 hp | 2003 |
| Renault | Megane II Estate (KM0/1_) | F4R | 135-138 hp | 2003-2011 |
| Renault | Megane II Coupe-Cabriolet (EM0/1_) | F4R | 135-163 hp | 2003-2009 |
| Renault | Megane III Hatchback (BZ0/1_, B3_) | F4R | 180-220 hp | 2008-2016 |
| Renault | Megane III Coupe (DZ0/1_) | F4R | 180-273 hp | 2008-2016 |
| Renault | Megane III Grandtour (KZ0/1) | F4R | 180-220 hp | 2008-2016 |
| Renault | Megane Scénic (JA0/1_) | F3R | 109-115 hp | 1997-2001 |
| Renault | Oroch | F4R | 137-145 hp | 2015 |
| Renault | Sandero/stepway II (B8_) | F4R | 145-150 hp | 2015 |
| Renault | Scénic I MPV (JA0/1_, FA0_) | F4P, F4R | 115-140 hp | 1999-2003 |
| Renault | Scénic II (JM0/1_) | F4R | 135-163 hp | 2003-2009 |
| Renault | Sport Spider (EF0_) | F7R | 147-150 hp | 1995-1999 |
| Renault | Super 5 (B/C40_) | F2N, F3N | 73-94 hp | 1986-1995 |
| Renault | VEL Satis (BJ0_) | F4R | 147-170 hp | 2002-2009 |
Why replace the thrust washers
A worn thrust washer does not always give warning: end float increases gradually, the crankshaft moves at every clutch disengagement and its thrust faces get damaged. Beyond the manufacturer's limit, repair means machining the crankshaft thrust faces, or even replacing the crankshaft. On an engine that is already open, new half washers cost very little compared with that risk, especially with an uprated clutch that increases the thrust.
-
Brand
-
Reference1T7807-STD
-
In stock21 Items
