Skip to content
  • On order
Renault Clio RS 2.0lts Soupape échappement inconel SUPERTECH 29 x 5.44 x 108.9mm Renault Clio RS 2.0lts Soupape échappement inconel SUPERTECH 29 x 5.44 x 108.9mm

Reinforced inlet valves RENAULT Mégane III RS F4R 874

€249.89 (tax incl.)
€312.36 (tax incl.) -20%

Set of 8 reinforced inlet valves for RENAULT Mégane III R.S. F4R 874 (265 and 273 hp).

  • Brand: SUPERTECH
  • Engines: F4R 874 2.0 turbo 16V
  • Dimensions: 32.3 mm head, 5.47 mm stem
  • Material: black nitrided stainless steel, 1 groove
RIVN-28337-1-8
On order, 15 to 30 days lead time
Pay in installments

RENAULT engines covered

The F4R 874 is the 2-litre, 16-valve turbocharged four-cylinder that Renault Sport kept for the Mégane III R.S. Coupé. From 2008 to 2016 it delivers 265 hp in the R.S. and Trophy versions, then 273 hp in the Trophy-R launched in 2014.

This engine has 8 inlet valves, two per cylinder. An ECU remap, a higher turbo pressure or sharper camshafts expose them to heat and impacts well beyond those of the standard car.

SUPERTECH reinforced inlet valves

On the turbo F4R, each inlet valve opens against the air forced in by the turbo, slams shut on its seat and keeps rubbing along its guide. It works between 400 and 550 °C, a range where the factory chrome-silicon steel weakens: 500 MPa at 500 °C, then only 250 MPa at 600 °C, a 50 % drop. Extra boost pressure and engine speed make this load heavier still.

This one is machined by SUPERTECH from stainless steel and then black nitrided: the hard skin limits sticking and slows stem wear in the guide. Its head is dished, its stem tip measures 10.7 mm, and a single groove takes the factory collets.

Inlet valve technical specification

Part numberBrandSizeHead ØStem ØLengthGroovesMaterial
RIVN-28337-1-8 SUPERTECH Standard 32.3 mm 5.47 mm 110 mm 1 Black nitrided stainless steel

RIVN-28337-1-8: set of 8 valves at the maker's standard size, dished head, 10.7 mm stem tip.

Fitting details

PartRENAULT originalReinforced
Collets
Valve stem seals
Valve guide

SUPERTECH designs these single-groove valves for the original Renault collets, preferably fitted new.

At standard size the valve sits on the factory inlet seats; lapping or a light recut is enough for the rebuild.

Technical guide

The brand offered

SUPERTECH Based in San Jose, SUPERTECH Performance has been engineering cylinder head components for racing for thirty years. Every batch goes through ultrasonic testing, X-ray inspection and laser measurement before it ships to tuning workshops, circuit and rally teams included.

How to choose

One set is offered for the F4R 874: at factory diameter, it fits without recutting the seats and stands out for its stainless steel and finish.

CriterionOption offered
Size Standard size
32.3 mm head at the maker's standard diameter, with no machining of the inlet seats.
Finish Black nitriding
Hardened surface: lower friction against the guide, stronger at temperature than a stock valve.

When reinforced valves become necessary

  • Sharper cams, stiffer springs
  • Remap raising boost and revs
  • Higher-flow turbo fitted to the F4R
  • Cylinder head rebuilt for circuit, track days or rally
  • Worn Renault valves or seats lapped repeatedly

Compatible vehicles

ModelEngine codePowerYears
Mégane III Coupé 2.0 R.S. F4R 874 265 hp 2008-2016
Mégane III Coupé 2.0 R.S. F4R 874 273 hp 2014-2016
Important: one set of 8 equips a complete engine. The F4R 870, 872 and the F4Rt 774 of the Mégane II R.S. are not covered by this listing.

Don't forget the camshafts

Reinforced valves make the most sense with a more ambitious valvetrain: sport camshafts designed for the Mégane III R.S. F4R 874 are offered here:

Sport camshafts RENAULT Mégane III R.S. F4R 874 →

16 other products in the same category

Viewed products

Loading...