Skip to content
  • In stock
144.00 x 21.00 x 51.60 x 25.00mm - Kit 4 bielles acier 817M40T forgees en H ZRP avec vis 3/8" ARP L19 144.00 x 21.00 x 51.60 x 25.00mm - Kit 4 bielles acier 817M40T forgees en H ZRP avec vis 3/8" ARP L19 144.00 x 21.00 x 51.60 x 25.00mm - Kit 4 bielles acier 817M40T forgees en H ZRP avec vis 3/8" ARP L19 144.00 x 21.00 x 51.60 x 25.00mm - Kit 4 bielles acier 817M40T forgees en H ZRP avec vis 3/8" ARP L19

Forged connecting rods Renault - 2.0L & 1.8L 16V - F4R / F7R / F7P for forged pistons

€532.80 (tax incl.)
€666.00 (tax incl.) -20%

Set of 4 forged 4340-steel connecting rods for Renault F4R, F7R and F7P 2.0/1.8 16V.

  • Brand: ZRP
  • Compatibility: Clio RS, Mégane RS, Clio Williams
  • Engine codes: F4R, F7R, F7P
  • Bolts included: ARP 2000, L19
R-REN-001-I
1 in stock in France
2 in stock in Europe (72h lead time)
Available in stock in France
Pay in installments

The Renault F4R, F7R and F7P engines (2.0 / 1.8 16V)

The F7P, F7R and F4R make up the 16-valve line of Renault's "F-Type" engine, a cornerstone of Renault Sport. The F7P launched the family in 1991: a 1.8L 16V (1,764 cc, 82 mm × 83.5 mm) powering the Clio 16S and Williams. The F7R then raised displacement to 2.0L 16V (Clio Williams, Mégane Coupé, around 147 hp). The F4R, introduced in 1998, made the 2.0L 16V (1,998 cc, 82.7 mm × 93 mm) widespread across the Clio RS and Mégane RS, both naturally aspirated and turbocharged (F4Rt), from 138 to 275 hp depending on the model.

The whole F family shares the same rotating assembly (144 mm rod centre distance), allowing a single forged rod. Hugely popular in motorsport and tuning (Clio RS, Mégane RS), the F4R readily takes boost and higher revs. But beyond factory figures, the stock connecting rod becomes the weak link, which is where forged connecting rods come in.

Forged connecting rods

Machined from high-strength 4340 steel, these forged connecting rods reinforce the bottom end of the F4R, F7R and F7P as power rises. They become essential when fitting forged pistons, building a turbo setup, raising the rev limit or enlarging displacement, where the stock rod reaches its limits.

Built to withstand the heavy loads of tuned F engines (naturally aspirated as well as turbo), they suit every discipline (rally, circuit and track days, drift, drag, hillclimb, time attack) and support Stage 2, Stage 3 and beyond. Depending on the bolts chosen, ARP 2000 or ARP L19, they safely handle targets of several hundred horsepower.

Technical specifications of the F4R / F7R / F7P forged connecting rods

ReferenceBrandProfileBoltsPin diameter
OEM 21 mm
Small-end widthBig-end diameterBig-end widthCenter-to-center
OEM 144 mm
Weight
per rod
R-REN-001-I ZRP I ARP 2000-3/8"-38mm 21 mm 51,6 mm 25 mm 144 mm 513 g
R-REN-001-I-L19 ZRP I ARP L19-3/8"-38mm 21 mm 51,6 mm 25 mm 144 mm 513 g

ZRP: With bearing locating tag; lightweight design.

Torque and bolt stretch

RodBoltsTorqueRecommended stretch
ZRP (R-REN-001-I) ARP 2000 61 N·m 0,140 – 0,152 mm
ZRP (R-REN-001-I-L19) ARP L19 67,8 N·m 0,152 – 0,165 mm

The two ZRP part numbers on this page do not take the same bolts, which is exactly why no single torque figure covers the whole engine: each one was calculated with its own bolts, ARP 2000 for the R-REN-001-I and ARP L19 for the R-REN-001-I-L19, and therefore has its own line in the table above. Use the value belonging to the rod actually fitted, never the neighbouring one. Keep in mind, too, that a torque wrench does not measure preload but the torque it transmits, a variable share of which vanishes into friction. Hence the value of a stretch gauge, which verifies the real elongation of the eight bolts and is the dependable method whenever there is doubt. Clean threads, a thin film of ARP assembly lubricant and tightening taken up in several stages rather than one long pull make preload consistent from cylinder to cylinder. The manufacturer’s instruction sheet takes priority.

Technical guide

4340 forged steel: what is it?

4340 steel is a nickel-chromium-molybdenum alloy steel used in aerospace and motorsport alike. Forged then heat-treated (quench and temper), it offers excellent tensile strength, high fatigue resistance and real ductility. Compared with an original rod (often sintered/powder metal, optimised for series-production cost), a 4340 forged rod shows roughly +19% higher yield strength, +8% higher tensile strength and above all +19% to +37% higher fatigue strength, i.e. a fatigue life under cyclic loading several times longer. This is what makes forged 4340 the reference material as soon as boost and rpm climb.

The connecting rod profile

I-beam profile. Its slimmed-down central section, bordered by two flanges that form the “I” shape, lets the rod keep high rigidity while limiting its mass. On modern turbo engines such as the F4R, it is the profile of choice, whether the aim is to make the bottom end reliable or to support a rise in boost pressure.

How to choose your rod bolts?Logo ARP

On a built F4R or F7R, the rod bolt is what really limits the rpm and the cylinder pressure: it is where the choice starts. It is made according to the discipline, from torque used in the mid range in rally to rpm held high through a circuit session, up to the short load peaks of drag racing, then according to the target power per cylinder. The grades offered here come in 3/8"-38 mm with the ZRP rods.

Vis de bielle forgée ARP2000 ARP 2000, with its ~220,000 psi (~1,517 MPa) tensile strength, covers most built F4R, F7R and F7P engines: up to 200 hp per cylinder in 3/8" and up to 8,500 rpm. It is the grade found in circuit racing, track days, drift, rally, drag racing and hillclimb, and here it equips the ZRP rods, with no particular storage constraint. It is the safe default choice for a whole season.
Vis de bielle forgée ARP L19 L19 takes the level to ~260,000 psi (~1,793 MPa) and allows up to 250 hp per cylinder in 3/8" as well as 10,000 rpm. It is aimed at heavily boosted F4R engines, with high cylinder pressure or rpm held high for a long time, and at the big power levels in drag racing, drift, rally and circuit. It is offered here on the ZRP rod in I profile. Its sensitivity to corrosion and to hydrogen embrittlement calls for oiled storage and fitting, away from moisture.

Measuring bolt stretch

Mesure de l'allongement d'une vis de bielle forgée à la jauge ARP

In addition to torque tightening, measuring rod-bolt stretch is the most reliable check for optimal preload. The check is done with the bolt fitted: place the gauge (dial indicator) on the two ends of the bolt and read its actual stretch, which must match the recommended value (see the torque & stretch table above). This method removes the friction variations inherent in torque tightening and secures the assembly on heavily stressed engines.

Buy the ARP stretch gauge →

The brand offered

ZRP, a Greek brand of high-performance forged connecting rods, designed by Alex Drakos in Athens. Each rod is forged from 4340 steel, precision-machined and balanced to ±1 g to stay reliable at high rpm. Offered here in the I profile with ARP 2000 or L19 bolts, they are designed and inspected in Greece, and proven in rally, on circuit and in drift.

Glossary

1) Small end
2) Small-end diameter
3) Rod beam
4) Rod bolt
5) Big end
6) Rod nut / bolt
7) Rod cap
8) Big-end diameter
9) Center-to-center

Vehicle compatibility – Renault F4R / F7R / F7P (2.0 and 1.8 16V)

These forged connecting rods fit the Renault 16-valve F-family engines listed below:

BrandModel (chassis)Engine codePowerYears
Renault Clio II RS 172 / 182 (X65) F4R 172-182 hp 1999-2005
Renault Clio III RS 197 / 200 (R) F4R 197-203 hp 2006-2013
Renault Mégane II RS 225 / 230 (M) F4R 225-230 hp 2004-2009
Renault Mégane III RS 250 / 265 / 275 (Z) F4R 250-275 hp 2009-2017
Renault Mégane I Coupé 2.0 16V F7R 147 hp 1996-1999
Renault Clio Williams / 16S (X57) F7P 137-150 hp 1991-1998
Renault Laguna I 2.0 16V F4R 139 hp 1998-2001

OEM reference: 7701478497 (set of 4 rods).

Why it’s the most cost-effective solution?

On these Renault 16-valve engines, a broken standard rod takes the piston with it and calls for a check of the block: putting things right with standard parts is then counted in new rods and pistons. The engine, meanwhile, starts again with the same limits as on day one, ready to do it again.

For a comparable, often lower budget, a set of forged 4340 steel rods combined with forged pistons changes the level of reliability and the safety margin, while opening real power potential. European engine builders have worked this way for more than 15 years on competition F4R and F7R engines.

For the same budget the conclusion is unchanged: more reliability, more potential, more service life for the bottom end.

16 other products in the same category

Viewed products

Loading...