Skip to content
  • In stock
Reinforced ARP bolts for OEM rods Renault F7P F7R F4R Reinforced ARP bolts for OEM rods Renault F7P F7R F4R

Reinforced ARP bolts for OEM rods RENAULT F7 F4

€111.09 (tax incl.)
€130.69 (tax incl.) -15%

ARP2000 rod bolt kit for OEM Renault F7P, F7R and F4R rods.

  • Brand: ARP
  • Engines: F7P, F7R, F4R
  • Thread: M9
  • Grade: ARP2000
ARP-216-6301
36 in stock in Europe (72h lead time)
Available in stock in Europe (72h lead time)
Pay in installments

The Renault F7P, F7R and F4R engines concerned

This kit is for the 16-valve Renault engines F7P (1.8 litre), F7R and F4R (2.0 litre), which ARP's application list ties to this part number. The header of the instruction sheet refers to the F4R 2.0-litre 16-valve with an M9 thread.

The original rod bolt of the F7P, F7R and F4R comes out and an ARP2000 bolt in M9 goes in, with a 12-point head and no washer, tightened directly into the rod. The sporting versions, in particular the F4R of the Clio RS and Mégane RS, are heavily loaded as soon as a build raises engine speed or power.

Reinforced ARP bolts for connecting rods

At every revolution, the rod bolt takes the pull of the rod and piston assembly, which tries to force the cap away through inertia. As original equipment, it is sized for stock power and is replaced at every strip-down.

ARP's reference method is tightening to a measured stretch with a gauge; without one, the instruction sheet gives a torque of 57 Nm. These bolts are made from ARP2000, an ARP-specific alloy steel heat treated to 220,000 psi tensile strength, with threads rolled once the treatment is complete. Classes 10.9 and 12.9 of standard fasteners start at 150,800 and 176,900 psi: ARP2000 exceeds them by 24 to 46%. The engine speed allowed by the ARP2000 bolts goes up to 10,250 rpm (calculated estimate).

Technical specifications

Part numberBrandGrade / materialHeadThreadUnder-head length
ARP-216-6301 ARP ARP2000 12-point M9 Not published

Tightening torque and stretch

ReferenceTightening torqueStretch
ARP-216-6301 57 Nm 0.165 - 0.178 mm

ARP recommends tightening to a measured stretch, which gives a more accurate preload than torque alone, given as a fallback. Torque and stretch figures assume ARP lubricant.

Figures taken from the ARP 216-6301 instruction sheet, revision in force on the day of publication. Should any difference appear, the official instruction sheet takes precedence. Read the ARP 216-6301 instruction sheet

No thread locker is called for by the ARP instruction sheet for this kit: the bolts are fitted with ARP Ultra-Torque grease, on the threads and under the head.

Once the fasteners are fitted, the ARP instructions call for the big ends to be checked and resized by a machine shop.

Measuring bolt stretch

Measuring the stretch of a rod bolt

Stretch measurement supplements torque tightening and gives the most accurate preload. It is done with the bolt in place: the gauge, fitted with a dial indicator, bears on both ends of the bolt and shows the stretch achieved, to be brought to the value in the table above. This avoids the variations caused by friction, which matters on a highly stressed engine.

Technical guide

Torque and stretch figures are only valid with ARP assembly grease, applied to the threads and under the head.

The ARP brand ARP

An engineer with an aerospace background, Gary Holzapfel launched ARP (Automotive Racing Products) in the early 1970s with one goal: to eliminate engine failures caused by weak fasteners in racing. ARP designs and manufactures thousands of part numbers in California, cylinder head, main and rod bolts, in several materials depending on the use, and has become known for the consistency of its manufacturing.

Vehicle compatibility

BrandModel (chassis)Engine codePowerYears
Renault 19 F7P 704 135 hp 1989-1996
Renault Clio 1 F7P 722 135 hp 1991-1996
Renault Clio Williams F7R 700 147 hp 1994-1998
Renault Megane 1 F7R 710 / 714 147 hp 1996-2003
Renault Clio 2 RS F4R 730 172 hp 2000-2004
Renault Clio 2 RS F4R 738 182 hp 2004-2009
Renault Megane 2 RS F4R 774 225 hp 2004-2009
Renault Clio 3 RS F4R 830 197 hp 2006-2012
Renault Clio 3 RS F4R 832 200 hp 2008-2014
Renault Megane 3 RS F4R 874 250 hp 2009-2015
Renault Megane 3 GT F4R 874 220 hp 2012-2016
Renault Megane 3 RS Trophy F4R 874 265 hp 2008-2016
Renault Megane 3 RS Trophy R F4R 874 273 hp 2014-2016
Important: ARP specifies this kit for rod bolts of the “cap screw” type in M9. Before ordering, check that your original rods use this type of bolt and that your engine really is an F7P, an F7R or an F4R. Forged rods supplied with their own bolts have no use for it.

Why is it the most cost-effective solution?

A rod bolt that breaks on an F4R or an F7R seldom destroys just one part: the rod, the piston and the block follow. Fitting ARP2000 bolts before pushing the engine costs a fraction of a bottom-end rebuild.

Matching connecting rod bearings

New bolts, new bearings: find below the connecting rod bearings suited to this engine.

Connecting rod bearings Renault F4R F7R F7P →

  • Brand
    ARP
  • Reference
    ARP-216-6301
  • EAN13
    0672036020101

16 other products in the same category

Viewed products

Loading...