- On order
Reinforced inlet valves MAZDA MZR 2.0 2.3 2.5 LF L3 L5
Set of 8 reinforced inlet valves for MAZDA MZR 2.0, 2.3 and 2.5 naturally aspirated (Mazda 3, 5, 6, MX-5 NC, CX-7).
- Brand: SUPERTECH
- Engines: LF-DE, LF-VE, L3-V, L3-VE, L5-VE and variants
- Dimensions: 35 mm or 36 mm head, 5.48 mm stem
- Material: black nitrided stainless steel
MAZDA engines covered
The MZR family brings together Mazda's naturally aspirated 16-valve four-cylinders of 2.0 litres (LF), 2.3 litres (L3) and 2.5 litres (L5). From 2002 to 2016 they power the Mazda 3, 5 and 6, the MX-5 NC 2.0, the CX-7 2.5, the MPV III, Premacy, Biante and Tribute, with 139 to 178 hp depending on displacement.
Each has 8 inlet valves, two per cylinder, with a 5.5 mm stem. Sharper camshafts, a higher rev limit or an added supercharger subject them to far more heat and impact than everyday use.
SUPERTECH reinforced inlet valves
On these naturally aspirated engines each inlet valve opens as the cam passes to draw in the mixture, knocks back onto its seat and slides endlessly in its guide bush. Between 400 and 550 °C, its working range, common chrome-silicon steel weakens: 500 MPa at 500 °C, then only 250 MPa at 600 °C, a 50 % loss. A tuned engine raises each of these loads.
Produced by SUPERTECH in stainless steel, they get a final black nitride treatment: the hardened layer limits stem galling and wear against the bush. Every one is thinned below the head with a shaped back face; buyers can pick a dished or a flat head.
The +1 mm oversize takes the head from 35 to 36 mm, stem and length unchanged. A wider path past the seat means more air and better filling, once the 8 inlet seats have been ground to that diameter.
Inlet valve technical specification
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| MAIVN-2301D-8 | SUPERTECH | Standard | 35 mm | 5.48 mm | 103.4 mm | Black nitrided stainless steel | |
| MAIVN-2301F-8 | SUPERTECH | Standard | 35 mm | 5.48 mm | 103.4 mm | Black nitrided stainless steel | |
| MAIVN-2304D-8 | SUPERTECH | +1 mm | 36 mm | 5.48 mm | 103.4 mm | Black nitrided stainless steel | |
| MAIVN-2304F-8 | SUPERTECH | +1 mm | 36 mm | 5.48 mm | 103.4 mm | Black nitrided stainless steel |
MAIVN-2301D-8 and MAIVN-2304D-8: dished head. MAIVN-2301F-8 and MAIVN-2304F-8: flat head. All: thinned under the head and profiled on the back, sets of 8.
Fitting details
| Part | MAZDA original | Reinforced |
|---|---|---|
| Collets | KPR-5.5-7A-ST-16 | |
| Valve stem seals | VSI-D5.5E-8 | |
| Valve guide | GDE-DUR16-8*2 (L5-VE) |
KPR-5.5-7A-ST collets and VSI-D5.5E valve stem seals match the 5.5 mm stem of these engines; the GDE-DUR16-8*2 bronze guides apply to the L5-VE.
With a 35 mm head the inlet seats stay at factory size; with 36 mm the workshop grinds all 8 seats before reassembly.
Technical guide
The brand offered
| Californian engine specialist SUPERTECH Performance has produced racing valvetrain parts, from valves to springs and guides, for around thirty years. Each production run passes ultrasonic, X-ray and laser inspection before it ends up inside the engines of tuners. |
How to choose
Cut close to the stem tip, the groove takes the collets that retain the upper retainer. For these MZR engines, decide the head diameter first, the shape next.
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Standard, 35 mm Seats kept at factory size. MAIVN-2301D-8, MAIVN-2301F-8. |
+1 mm, 36 mm A gain of about 10 to 12 cfm with each extra mm, seats ground; also suits seats reworked in the past. MAIVN-2304D-8, MAIVN-2304F-8. |
| Head | Dished Dished head. MAIVN-2301D-8, MAIVN-2304D-8. |
Flat Flat head. MAIVN-2301F-8, MAIVN-2304F-8. |
When reinforced valves become necessary
- Competition camshafts, rigid valve springs
- Rev limit moved up by an ECU change
- Supercharger or turbo fitted to a non-turbo MZR
- Cylinder head rebuilt with racing in mind
- Worn Mazda valves, seats ground several times
Compatible vehicles
| Model | Engine code | Power | Years |
|---|---|---|---|
| Mazda 3 (BK) 2.0 | LF-DE / LF-VE | 141-150 hp | 2003-2009 |
| Mazda 3 (BK) 2.3 | L3-V / L3-VE | 156-171 hp | 2003-2009 |
| Mazda 3 (BL) 2.0 | LF-VE | 143-150 hp | 2009-2014 |
| Mazda 3 (BL) 2.5 | L5-VE | 166-170 hp | 2009-2014 |
| Mazda 5 (CR) 2.0 | LF-DE / LF-VE / LFF7 | 139-146 hp | 2005-2010 |
| Mazda 5 (CR) 2.3 | L3-V / L3-VE / L333 | 155-166 hp | 2005-2010 |
| Mazda 5 (CW) 2.0 | LF-VE | 139 hp | 2014- |
| Mazda 5 (CW) 2.5 | L5-VE | 159 hp | 2011- |
| Mazda 6 (GG) 2.0 | LF-DE / LF-VE / LF17 / LF18 / LFF7 | 141-150 hp | 2002-2008 |
| Mazda 6 (GG) 2.3 | L3-VE / L3C1 | 158-178 hp | 2002-2008 |
| Mazda 6 (GH) 2.0 | LF-DE / LF-VE / LF17 | 147-155 hp | 2007-2013 |
| Mazda 6 (GH) 2.5 | L5-VE | 166-170 hp | 2007-2013 |
| Mazda 6 (GY) 2.0 | LF-DE / LF-VE / LF17 / LF18 / LFF7 | 141-150 hp | 2002- |
| Mazda 6 (GY) 2.3 | L3-VE / L3C1 | 162-178 hp | 2002-2008 |
| Mazda Biante (CC) 2.3 | L3-VE | 165 hp | 2008- |
| Mazda CX-7 (ER) 2.5 | L5-VE | 163 hp | 2009-2013 |
| Mazda MPV III (LY) 2.3 | L3-VE | 163-166 hp | 2006- |
| Mazda MX-5 III (NC) 2.0 | LF-VE | 160 hp | 2005-2016 |
| Mazda Premacy (CP) 2.3 | L333 | 166 hp | 2005 |
| Mazda Premacy 2.0 | LF-VE | 139-146 hp | 2005- |
| Mazda Premacy 2.3 | L3-VE | 165 hp | 2005- |
| Mazda Tribute (EP) 2.3 | L3-VE | 148-155 hp | 2003-2008 |
| Mazda Tribute 2.3 | L3-VE | 155 hp | 2007-2008 |
Don't forget the exhaust valves
Once the MZR head is on the bench, swap the 8 exhaust valves in the same job and, on the L5-VE, the bronze guides; these parts are here:
| Reinforced exhaust valves MAZDA MZR 2.5 L5-VE → |
| Bronze valve guides MAZDA 2.5 L5-VE → |
-
Brand
-
ReferenceMAIVN-2301F-8