Skip to content
  • In stock
Forged connecting rods Audi Volkswagen - 1.4L 16V TSI - EA211 for forged pistons Forged connecting rods Audi Volkswagen - 1.4L 16V TSI - EA211 for forged pistons Forged connecting rods Audi Volkswagen - 1.4L 16V TSI - EA211 for forged pistons Forged connecting rods Audi Volkswagen - 1.4L 16V TSI - EA211 for forged pistons

Forged connecting rods Audi Volkswagen - 1.4L 16V TSI - EA211 for forged pistons

€532.80 (tax incl.)
€666.00 (tax incl.) -20%

Set of 4 forged 4340 steel connecting rods for Audi / Volkswagen 1.4 TSI EA211.

Brand: ZRP
Compatibility: Audi A1/A3/Q2/Q3, SEAT Ibiza/Leon, Škoda Fabia/Superb, VW Golf VII/Polo/Passat
Engine codes: CZCA, CPTA, CHPA, CZDA, CZEA
Bolts included: ARP 2000

R-VW-005-I
5 in stock in Europe (72h lead time)
Pay in installments

The 1.4 TSI EA211 engine

The 1.4 TSI from the EA211 family is an inline four-cylinder petrol engine with direct injection and turbocharging, displacing 1,395 cc (74.5 mm bore, 80 mm stroke). Launched in 2012 to replace the EA111 family, this modern aluminium-head unit powers a very wide range of Volkswagen Group models – Volkswagen, Audi, SEAT and Škoda – in outputs from 125 to 150 hp, with several versions featuring cylinder deactivation (ACT). Compact and efficient, it combines forced induction and direct injection for excellent everyday efficiency.

As soon as boost pressure, load or engine speed is pushed beyond factory values, the stock rods of this small turbocharged unit – sized above all for economical use – become the weak link in the reciprocating assembly. Replacing them with forged rods is the decisive step to make an uprated EA211 1.4 TSI reliable for good, able to absorb the torque and rpm increases of a build without faltering.

The forged connecting rods

Our forged EA211 1.4 TSI rods are machined from wrought 4340 steel, the reference alloy in motorsport. They suit every discipline, from circuit to drift by way of rally, drag, time attack and hillclimb, and support both a strong fast-road 1.4 TSI build and an engine pushed for competition. Depending on the target (Stage 2 tuning, Stage 3 high power, Stage 4 and beyond), they lock in the power increase without ever cutting corners on reliability. Supplied as a weight-matched set of 4 to within ±1 g, they keep the factory 19 mm piston pin and 140.02 mm center-to-center length.

Compared with a factory rod designed above all for high-volume manufacturing cost, a forged 4340 rod offers a clearly greater mechanical reserve: around +19% yield strength, +8% tensile strength and +19 to +37% fatigue endurance. That margin lets a boosted EA211 1.4 TSI absorb cylinder-pressure peaks and inertia loads without breakage. The entire range offered here is made from this same forged 4340 steel.

Technical specifications of the EA211 forged rods (19 mm pin, 140.02 mm center-to-center)

ReferenceBrandProfileRod boltsPin bore (mm)Small-end width (mm)Big-end bore (mm)Big-end width (mm)Center-to-center (mm)Weight (g)
R-VW-005-I ZRP I ARP 2000-5/16"-38mm 19 50,6 20 140,02 397

ZRP: Tapered pin end.

Tightening torque and stretch

On the EA211 the two bolts of one cap are tightened alternately, never one fully before the other: work in even steps, moving from side to side, so the cap comes down flat on the bearing shell. The gauge is read again at every step, and the difference between the two bolts of the same rod must stay inside the range given. The kit is offered with ARP 2000 in 5/16" 38 mm, a single row in the table: the torque and stretch shown there come from the bolt manufacturer and must be followed scrupulously, the measured stretch being what counts and torque only serving to confirm it.

ReferenceBrandRod boltsTorqueRecommended stretch
R-VW-005-I ZRP ARP 2000-5/16"-38mm 40.7 N·m 0.140 to 0.152 mm

Technical guide

Forged 4340 steel: what is it?

4340 is a low-alloy steel with nickel, chromium and molybdenum. Forging aligns the metal fibres in the direction of load, closes internal porosity and delivers far greater mechanical strength than a factory cast or sintered rod. The result is a tensile strength of around 930 to 1,080 MPa together with high fatigue endurance, essential as soon as the engine gains torque, power or revs. This is the material used across our entire EA211 range.

The rod profile offered

I-Beam I-beam profile. Its slimmer central body, set between two side flanges that make up an “I”, gives the rod strong stiffness without adding weight to the reciprocating assembly. On modern turbo engines such as the 1.4 TSI EA211, it is the most frequently chosen profile, serving both to make the bottom end more reliable and to support a rise in boost pressure.

How to choose your rod bolts?

ARP 2000 ARP 2000: the all-round benchmark alloy, with a tensile strength of about 220,000 psi (1,517 MPa). Offered here in the 5/16" diameter suited to the EA211 center-to-center, it covers the vast majority of builds, from raised boost to high power. It is the default choice to make the bottom end reliable for good. It secures power of around 150 hp per cylinder and rpm up to 8,500.

Measuring bolt stretch

The most reliable way to guarantee bolt preload is not to aim for a torque figure but to measure bolt stretch with a dial gauge. Tighten progressively until the recommended stretch is reached, here 0.140 to 0.152 mm: this ensures an even, repeatable clamp load, cylinder after cylinder.

Mesure allongement

See the ARP stretch gauge

The brand offered

ZRP This EA211 range is made by ZRP, a manufacturer of high-performance race forged rods. It is offered in the I profile, machined from 4340 steel and supplied with ARP 2000 bolts in 5/16". Each reference ships as a complete weight-matched set of 4, with its dedicated ARP bolts.

Glossary

1) Small end
2) Small-end diameter
3) Rod beam
4) Rod bolt
5) Big end
6) Rod nut / bolt
7) Rod cap
8) Big-end diameter
9) Center-to-center

Vehicle compatibility for the 1.4 TSI EA211 engine

The following summary covers the vehicles fitted with the Audi Volkswagen 1.4L 16V TSI EA211 engine. A check of the piston pin diameter and of the rod length is required before ordering.

MakeModel (chassis)Engine codePowerYears
Audi A1 (8X1, 8XK) / Sportback (8XA, 8XF) CZCA, CPTA, CZEA 125–150 hp 2012–2018
Audi A3 (8V) / Sportback / Limousine / Cabriolet CXSB, CZCA, CPTA, CHPA, CZEA 125–150 hp 2013–2020
Audi Q2 (GAB, GAG) CZEA 150 hp 2016–
Audi Q3 (8UB, 8UG) CHPB, CZDA, CZEA 150 hp 2013–2018
SEAT Ibiza IV (6J, 6P) CPTA, CHPA, CZEA 140–150 hp 2012–2016
SEAT Leon (5F) / SC / ST CZCA, CHPA, CZDA, CZEA 125–150 hp 2012–2020
SEAT Toledo IV (KG3) CZCA 125 hp 2015–2019
SEAT Ateca (KH7, KHP) CZEA, DJKA 150 hp 2016–
Škoda Fabia III (NJ3) CZCA 125 hp 2018–2021
Škoda Rapid / Spaceback (NH, NK) CZCA 125 hp 2015–2022
Škoda Superb III (3V) / Break CZCA, CZDA, CZEA 125–150 hp 2015–2024
Škoda Yeti (5L) CZCA 125 hp 2015–2017
Škoda Kodiaq (NS, NV) CZCA, CZDB, CZDA, CZEA 125–150 hp 2016–
Škoda Karoq (NU, ND) CZEA, DJKA 150 hp 2017–
Volkswagen Golf VI Cabriolet (517) CXSB, CZCA 125 hp 2013–2016
Volkswagen Golf VII (5G, BQ, BE) / Variant / Sportsvan CZCA, CHPA, CPTA, CZDA, CZEA, DGXA 125–150 hp 2012–2021
Volkswagen Jetta IV (162, 163, AV) CZCA 125 hp 2014–2017
Volkswagen Passat B8 (3G, CB) / Variant / Alltrack CZCA, CZDA, CZEA 125–150 hp 2014–2024
Volkswagen Polo V (6R, 6C) CPTA, CZCA 125–140 hp 2012–2020
Volkswagen Scirocco III (137, 138) CXSB, CZCA 125 hp 2013–2017
Volkswagen Tiguan (AD1, AX1) CZCA, CZDB 125 hp 2016–2022

Why is it the most economical solution?

On a tuned EA211 1.4 TSI, a stock rod that lets go usually takes the block, crankshaft and pistons with it. Investing in a forged rod set from the outset costs far less than an engine failure followed by a full rebuild. You permanently strengthen the bottom end, preserve the value of your build and drive with peace of mind, in intensive use as much as day to day.

2 other products in the same category

Viewed products

Loading...