- In stock
Reinforced inlet valves PEUGEOT CITROËN 206 207 307 308 C2 C3 C4 TU5JP4
Set of 8 reinforced inlet valves for PEUGEOT TU5JP4 1.6 16V and CITROËN (Xsara, C2, C3, C4).
- Brands: SUPERTECH, CATCAMS
- Engine: TU5JP4 1.6 16V (206, 207, 307, 308, Partner)
- Dimensions: head 31.3 mm, length 103.8 mm or 103.7 mm
- Material: black nitride stainless steel (SUPERTECH)
PEUGEOT and CITROËN engines covered
The TU5JP4 is PSA's 1.6 litre (1,587 cc) four-cylinder with 16 valves, 78.5 mm bore and 82 mm stroke. At Peugeot it powers the 206, 207, 307 and 308, as well as the 1007, Partner and Hoggar, from 106 to 115 hp depending on version, from 2000 onwards. At Citroën it is fitted to the Xsara, Xsara Picasso, C2, C3, C4 and Berlingo from 2000 onwards, from 109 to 116 hp depending on version.
Its cylinder head takes 8 inlet valves, two per cylinder. This engine lends itself well to tuning: sharper camshafts, higher revs or a head rebuilt for racing put heavy demands on the original valves.
SUPERTECH and CATCAMS reinforced inlet valves
On the TU5JP4, the 8 inlet valves work in pairs: at each pass of the cam, one of them drops to fill the cylinder with fresh air, then rises to slap its seat while sliding in the guide. When the 1.6 litre brushes its red line, this movement recurs more than twenty times every second. The valve then sits between 400 and 550 °C; in that bracket, the usual chrome-silicon steel of stock parts keeps only 500 MPa at 500 °C and drops to 250 MPa at 600 °C, so 50 % of its strength vanishes as soon as the heat creeps up. A wilder cam, harder springs or a higher cut-off only worsen this fatigue.
The SUPERTECH PEIVN-28603-8 comes from a stainless steel then treated by black nitriding: this hard, smooth layer shields the stem from friction against the guide and limits wear, even after long sessions. Its stem is also relieved just under the head, which lightens it and gives the gases a wider path, while the rear face of its head is reworked to soften the air's arrival on the seat. The CATCAMS 9249005M completes the offer, especially for a head already running a valve train from that brand.
Both sets carry a 31.3 mm head and fit with no machining of the seats to a larger diameter. The SUPERTECH, offered by its maker at standard size, is 103.8 mm long; the CATCAMS 9249005M has a 6 mm stem and a 103.7 mm length. No enlarged-head version is offered for this engine on this page.
Inlet valve technical specification
| Part number | Brand | Size | Head Ø | Stem Ø | Length | Grooves | Material |
|---|---|---|---|---|---|---|---|
| PEIVN-28603-8 | SUPERTECH | Standard | 31.3 mm | 103.8 mm | Black nitride stainless steel | ||
| 9249005M*8 | CATCAMS | 31.3 mm | 6 mm | 103.7 mm |
Fitting details
| Part | original | Reinforced |
|---|---|---|
| Collets | ||
| Valve stem seals | ||
| Valve guide |
Before assembly, check that the collets match the groove of the chosen valves.
Technical guide
The brands offered
| SUPERTECH Performance set up its business in San Jose, on the Californian coast: for more than thirty years the brand has designed guides, retainers, springs and valves there for racing. Each batch is probed by ultrasound, X-rayed and laser-measured, then approved by engine builders. | |
| CATCAMS grew in Europe around the racing camshaft, before widening its range to the valves, springs and retainers that go with each of its profiles. Its sets target rally, hill climb and circuit engines built to take high revs. |
How to choose
The groove is the slot cut at the stem tip; the collets sit in it to hold the retainer. Both sets have the same head, only the brand and finish change:
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Brand and finish | SUPERTECH 31.3 mm head and 103.8 mm length, in stainless steel coated with black nitriding, with a stem thinned at the foot of the head. |
CATCAMS 31.3 mm head, 6 mm stem and 103.7 mm length, to complete a valve train from that brand already fitted. |
When reinforced valves become necessary
- Wilder cam or springs rated higher
- Rev limit moved past stock
- Forced induction added to this 1.6 litre
- Head reworked for rallies, hill climbs or track
- Factory valves damaged, life-expired or seat faces reground
Compatible vehicles
| Model | Engine code | Power | Years |
|---|---|---|---|
| CITROËN BERLINGO / BERLINGO FIRST (MF_, GJK_, GFK_) 1.6 16V (MFNFU) | TU5JP4 | 109-110 hp | 2000-2011 |
| CITROËN BERLINGO MULTISPACE (B9) 1.6 | TU5JP4 | 109-110 hp | 2008-2018 |
| CITROËN C2 (JM_) 1.6 | TU5JP4 | 109-110 hp | 2003-2017 |
| CITROËN C3 AIRCROSS I 1.6 / 1.6 Vti / 1.6 Flex | TU5JP4 | 110-116 hp | 2010- |
| CITROËN C3 I (FC_, FN_) 1.6 16V / 1.6 Bioflex | TU5JP4 | 109-113 hp | 2002-2013 |
| CITROËN C3 II (SC_) 1.6 VTi | TU5JP4 | 116 hp | 2013- |
| CITROËN C3 PICASSO (SH_) 1.6 / 1.6 Flex | TU5JP4 | 110-113 hp | 2011-2013 |
| CITROËN C3 Pluriel (HB_) 1.6 | TU5JP4 | 109 hp | 2003- |
| CITROËN C4 (LA_) 1.6 16V | TU5JP4 | 109-110 hp | 2004-2013 |
| CITROËN C4 I (LC_) 1.6 16V / 1.6 Flex / 1.6 16V Bio-Flex | TU5JP4 | 109-113 hp | 2004-2014 |
| CITROËN C4 I 1.6 / 1.6 16V | TU5JP4 | 109-110 hp | 2006-2014 |
| CITROËN C4 II (NC_) 1.6 (NCNFU0) | TU5JP4 | 110 hp | 2010- |
| CITROËN XSARA (N0) 1.6 16V | TU5JP4 | 109 hp | 2000-2005 |
| CITROËN XSARA (N1) 1.6 16V | TU5JP4 | 109 hp | 2000-2005 |
| CITROËN XSARA (N2) 1.6 16V | TU5JP4 | 109 hp | 2000-2005 |
| CITROËN XSARA PICASSO (N68) 1.6 16V / 1.6 Flex | TU5JP4 | 109-113 hp | 2005-2012 |
| PEUGEOT 1007 (KM_) 1.6 16V | TU5JP4 | 109 hp | 2005- |
| PEUGEOT 206 (2A/C) 1.6 / 1.6 16V / 1.6 Flex / 1.6 BiFuel | TU5JP4 | 107-113 hp | 2000-2009 |
| PEUGEOT 206 1.6 16V | TU5JP4 | 109 hp | 2007- |
| PEUGEOT 206 CC (2D) 1.6 / 1.6 16V (2DNFUF, 2DNFUR) | TU5JP4 | 109-110 hp | 2000-2008 |
| PEUGEOT 206 SW (2E/K) 1.6 / 1.6 16V / 1.6 LPG / 1.6 Flex | TU5JP4 | 109-113 hp | 2002- |
| PEUGEOT 207 (WA_, WC_) 1.6 / 1.6 16V / 1.6 Flex | TU5JP4 | 106-113 hp | 2006-2013 |
| PEUGEOT 207 1.6 16V / 1.6 Bioflex | TU5JP4 | 109-113 hp | 2008-2013 |
| PEUGEOT 207 SW (WK_) 1.6 / 1.6 Flex | TU5JP4 | 110-113 hp | 2008-2013 |
| PEUGEOT 307 (3A/C) 1.6 / 1.6 16V / 1.6 Flex / 1.6 BioFlex | TU5JP4 | 109-113 hp | 2000-2012 |
| PEUGEOT 307 (3E) 1.6 16V / 1.6 BioFlex | TU5JP4 | 109 hp | 2002-2008 |
| PEUGEOT 307 1.6 / 1.6 Flex | TU5JP4 | 110-113 hp | 2006-2012 |
| PEUGEOT 307 CC (3B) 1.6 16V | TU5JP4 | 110 hp | 2003-2009 |
| PEUGEOT 307 SW (3H) 1.6 16V / 1.6 BioFlex | TU5JP4 | 109 hp | 2002-2008 |
| PEUGEOT 308 I (4A_, 4C_) 1.6 BioFlex | TU5JP4 | 109 hp | 2008-2014 |
| PEUGEOT 308 SW I (4E_, 4H_) 1.6 Bioflex | TU5JP4 | 112 hp | 2009-2014 |
| PEUGEOT 405 II (4B) 1.6 | TU5JP4 | 109 hp | 1992-1997 |
| PEUGEOT 405 II (4E) 1.6 | TU5JP4 | 109 hp | 1992-1996 |
| PEUGEOT HOGGAR 1.6 / 1.6 Flex | TU5JP4 | 106-113 hp | 2010- |
| PEUGEOT PARTNER (5_, G_) 1.6 16V / 1.6 Flexfuel / 1.6 VTC Plus / 1.6 VTi Flex | TU5JP4 | 109-115 hp | 2000- |
| PEUGEOT PARTNER ORIGIN (G_) 1.6 16V | TU5JP4 | 110 hp | 2011-2013 |
| PEUGEOT PARTNER TEPEE 1.6 VTi | TU5JP4 | 106-110 hp | 2008- |
Related products
To rebuild a TU5JP4 head as new, also think of its exhaust valves: we sell them reinforced too, on the page opened by the button below:
| PEUGEOT 206 207 307 TU5JP4 exhaust valves → |
-
Brand
-
ReferencePEIVN-28603-8