Sort and filter
- 1.2L 16v - EA211
- 1.3L 8v - G40
- 1.4L 16v - AFH
- 1.4L 16v - EA111
- 1.4L 16v - EA211
- 1.5L 16v - EA211
- 1.6L 8v - EG
- 1.6L 16v - AJV/ARC
- 1.6L 16v - EG Oettinger
- 1.8L 8v - DX
- 1.8L 8v - G60
- 1.8L 16v - EA888
- 1.8L 16v - KR PL
- 1.8L 16v - KR PL with 20v cylinder head
- 1.8L 20v - EA113
- 1.8L 20VT
- 2.0L 8v - ABA
- 2.0L 8v - ABA with 20v cylinder head
- 2.0L 8v - EA113
- 2.0L 16v - 9A
- 2.0L 16v - ABF
- 2.0L 16v - ABF with 20v cylinder head
- 2.0L 16v - EA113 Gen1 K03
- 2.0L 16v - EA113 Gen2 K04
- 2.0L 16v - EA888 Gen1
- 2.0L 16v - EA888 Gen2
- 2.0L 16v - EA888 Gen3
- 2.0L 16v - EA888 Gen4
- 2.3L 10v - VR5
- 2.3L 20v - VR5
- 2.8/2.9L 12v - VR6
- 2.8L 24v - VR6
- 3.2L 24v - R32
- 3.6L 24v - R36
- 2.8L 30v - ACK AHA ATQ
- 1.7L 8v - Type IV
Sort by:
Filter By
2.0L 16v - ABF with 20v cylinder head
This page is aimed at fitting a 1.8T 20-valve head onto a two-litre ABF block. Only the forged piston is specific to that build, quoted for both ABA and ABF and available in JE Pistons or Wiseco…This page is aimed at fitting a 1.8T 20-valve head onto a two-litre ABF block. Only the forged piston is specific to that build, quoted for both ABA and ABF and available in JE Pistons or Wiseco depending on the variant. Everything else is 1.8T 20V head hardware shared with the other conversions: an Athena or Cometic uprated head gasket, Ferrea or Supertech exhaust valves and springs, inlet valves, mechanical cam followers, guides and stem seals, ACL or King big end and main bearings. Neither forged rods nor head studs are attached here.
- In stock
€232.99
€291.24
-20%
- New
- In stock
- In stock
€189.87
€210.97
-10%
- In stock