Sort and filter
- 1.6L 8v - 616.16
- 1.7L 8v - Type IV
- 2.0L 8v - Type IV
- 2.0L 8v - XJ XK M31.01 M31.03
- 2.0L 12v - 901
- 2.2L 12v - 911
- 2.4L 12v - 911
- 2.5L 8v - M44
- 2.5L 16v - M44/40
- 2.5L 24v - M96
- 2.7L 12v - 911
- 2.7L 24v - M96
- 2.7L 24v - M97
- 2.9L 24v - EA839
- 2.9L 24v - MA1.20
- 3.0L 12v - 930
- 3.0L 12v - 930 Turbo
- 3.0L 16v - M44/40
- 3.0L 24v - CTMA
- 3.0L 24v - EA837 CAJA CAKA CCBA CMUA
- 3.0L 24v - EA839
- 3.2L 12v - 930
- 3.2L 24v - M96
- 3.3L 12v - 930/M30
- 3.4L 24v - M96
- 3.4L 24v - M97
- 3.6L 12v - M64
- 3.6L 24v - M96
- 3.6L 24v - M96 Turbo
- 3.6L 24v - M97
- 3.6L 24v - M97 Turbo
- 3.7L 24v - MA2.75
- 3.8L 12v - M64
- 3.8L 24v - M97
- 3.8L 24v - MA1.71
- 4.0L 24v - MA1.76 MA1.77
- 4.0L 24v - MA1.77
- 4.0L 24v - MA1.79 MA1.85 MA1.86
- 4.0L 24v - MA2.75
- 4.2L 24v - MA1.87
- 4.5L 32v - M48.00 M48.50
Sort by:
Filter By
3.0L 12v - 930 Turbo
This page brings together four references for the turbocharged 3.0L 12-valve 930 Turbo engine. Forged WOSSNER pistons (ref. K9289DA) carry a 95mm bore and a 6.5:1 compression ratio, the signature of…This page brings together four references for the turbocharged 3.0L 12-valve 930 Turbo engine. Forged WOSSNER pistons (ref. K9289DA) carry a 95mm bore and a 6.5:1 compression ratio, the signature of a turbo block sized down for boost pressure, opposite the naturally aspirated 930's 98mm and 9.5:1. This same page also carries the ACL RACE tri-metal rod bearings, the forged CARRILLO connecting rods in H-beam section and WMC material, and the ARP reinforced head studs, three references also fitted on the atmospheric 930 and the Porsche 911 2.4L/2.7L 12v. Four references to keep the 930 Turbo reliable under boost.
- On order
€2,080.19
€2,600.23
-20%
- On order
€1,539.67
€1,811.38
-15%
- On order
€1,284.16
€1,510.78
-15%