- On order
Reinforced exhaust valves Honda Integra Civic B18A B18B
Set of 8 reinforced exhaust valves for the Honda B18A and B18B.
- Brand: SUPERTECH
- Engines: B18A1, B18A2, B18B1 to B18B4, B18B6
- Dimensions: 28.0 mm head (standard) or 28.5 mm, 6.55 mm stem
- Material: black nitrided stainless steel
Honda engines covered
The B18A and B18B are Honda 1,834 cc four-cylinder engines (81 mm bore, 89 mm stroke) with twin camshafts and 16 valves, without VTEC. From 1989 to 2001 they powered the Integra, the Civic 180i, the Domani and the Orthia.
Their cylinder head carries 8 exhaust valves, two per cylinder. SUPERTECH reproduces them with a 28.0 mm head, a 6.55 mm stem and a 105.8 mm overall length.
SUPERTECH reinforced exhaust valves
At every opening the head of this valve is licked by burnt gases: its metal reaches 760 to 870 °C in a naturally aspirated B18 and passes 1,000 °C once a turbo is added. To shed that heat it only has the seat, which takes around 75 %, and the guide, which receives some 20 %. The original part is measured against an EV8 family steel: 550 MPa at 600 °C, but only 300 MPa at 800 °C. Overloaded, the head distorts, wears through fatigue and no longer closes tightly.
Both SUPERTECH versions are made of heat resistant stainless steel finished with black nitriding. The treatment hardens the stem surface and makes it smoother: it rubs less in its guide and wears more slowly, an asset on an engine that often runs high in the rev range.
The HEVN-1004-8 adds half a millimetre to the head, from 28.0 to 28.5 mm, for the same 105.8 mm length. Burnt gases find a wider exit, the following charge benefits, and so does power; the exhaust seats are therefore cut to this diameter.
Exhaust valve technical specifications
| Part number | Brand | Size | Head Ø OEM 28.0 mm | Stem Ø OEM 6.6 mm | Length OEM 106.0 mm | Grooves | Material |
|---|---|---|---|---|---|---|---|
| HEVN-1004-0-8 | SUPERTECH | Standard | 28.0 mm | 6.55 mm | 105.8 mm | Black nitrided stainless steel | |
| HEVN-1004-8 | SUPERTECH | +0.5 mm | 28.5 mm | 6.55 mm | 105.8 mm | Black nitrided stainless steel |
Valve fitting
| Part | Honda original | Reinforced |
|---|---|---|
| Collets | 14781-PL2-004 | |
| Valve stem seals | 12210-PT2-003 / 12211-PT2-003 | |
| Valve guide | 12205-PR4-A01 |
Check that the valve lock groove matches the collets you reuse before refitting the springs.
At 28.0 mm the seats keep their diameter; with the HEVN-1004-8, the 8 exhaust seats are machined to 28.5 mm.
Both part numbers share the same 6.55 mm stem and 105.8 mm overall length: the original guides are fine if they are within tolerance.
Technical guide
Our brand
| SUPERTECH Performance has designed competition springs, titanium retainers, guides and valves in Silicon Valley for more than 30 years. Stainless, titanium, Inconel: the brand works out every valve for one engine, then hands it to teams racing on track, in rally and in drag events for testing. |
How to choose
Held under the spring retainer by its collets, the valve relies on how they are fitted for its retention. Here both versions share the same material and differ only in the diameter of their head:
| Criterion | Option 1 | Option 2 |
|---|---|---|
| Size | Standard, 28.0 mm Standard diameter: the valve sits on original seats, with no rework of the cylinder head. |
+0.5 mm, 28.5 mm Slightly larger head for a better flow of burnt gases, in exchange for seats machined to 28.5 mm. |
| Material | Black nitrided stainless steel Material shared by both versions, with a stem hardened by nitriding. |
When reinforced valves become necessary
- Harder springs or camshafts with a more aggressive profile
- Frequent and sustained runs to high revs
- Fitting a turbo or a supercharger
- Cylinder head rebuilt for regular track days
- Original exhaust valves marked, pitted or worn
Vehicle compatibility
| Model | Engine code | Power | Years |
|---|---|---|---|
| Integra 1.8 (DA9) | B18A1 / B18B1 | 131 hp | 1989-1993 |
| Integra 1.8 (DB1) | B18A2 | 140 hp | 1989-1993 |
| Integra Coupé 1.8 (DC2) | B18B1 / B18B2 | 137-146 hp | 1993-2001 |
| Integra 1.8 ESi (DB7) | B18B2 | 145 hp | 1993-2001 |
| Civic IV Shuttle 1.8 (EE7) | B18B6 | 131-140 hp | 1988-1995 |
| Civic V 180i (SR4) | B18B3 | 132 hp | 1994-1996 |
| Civic VI 180i (SO4) | B18B4 | 140 hp | 1996-2000 |
| Domani 1.8 (MA5) | B18B6 | 140 hp | 1992-1997 |
| Orthia 1.8 (EL1 / EY4) | B18B6 | 140 hp | 1995-2001 |
OEM part number (exhaust valve): 14721-PH3-000; 14721-P75-000 (B18B1, 1997-1999)
Don't forget the inlet valves
An open B18A or B18B cylinder head lets you replace the valve stem seals together with the inlet valves. Here is the part to plan for on this engine:
| B18A B18B inlet valves → |
-
Brand
-
ReferenceHEVN-1004-0-8