Skip to content
  • In stock
MINI Coooper S 2002 -2007 Soupape échappement INCONEL SUPERTECH /Tête plate à 1 angle 24.2x5.92x118.37mm MINI Coooper S 2002 -2007 Soupape échappement INCONEL SUPERTECH /Tête plate à 1 angle 24.2x5.92x118.37mm

Reinforced inlet valves MINI Peugeot Citroën N14B16 EP6DT EP6DTS

€249.08 (tax incl.)
€311.35 (tax incl.) -20%

Set of 8 reinforced inlet valves for MINI, PEUGEOT and CITROËN N14B16 and EP6DT (Cooper S, JCW, 207, 308, C4, DS3).

  • Brand: SUPERTECH
  • Engines: N14B16A, N14B16AB, N14B16C, EP6DT, EP6DTS
  • Dimensions: 28.8 mm or 29.8 mm head, 4.96 mm stem
  • Material: black nitrided stainless steel, single groove
MCIVN-1200S-8
3 in stock in Europe (72h lead time)
Available in stock in Europe (72h lead time)
Pay in installments

MINI, PEUGEOT and CITROËN engines covered

The 16-valve 1.6 turbo known as the Prince engine is shared by MINI and PSA: it carries the codes N14B16A, N14B16AB and N14B16C at MINI, EP6DT and EP6DTS at Peugeot and Citroën. From 2006 to 2015 it powers the MINI Cooper S and John Cooper Works R55 to R59, the Peugeot 207 and 308 and the Citroën C4 and DS3, from 140 to 218 hp.

The engine uses 8 inlet valves, two per cylinder. On the MINI, original part 11 34 7 587 470 has a 28.8 mm head and a 4.97 mm stem, held by 5 mm collets. A remap, raised boost pressure or sharper camshafts expose them to far more heat and impact than the standard engine ever does.

SUPERTECH reinforced inlet valves

Cycle after cycle, the inlet valve lifts to let in the air pushed by the turbo, slams back onto its seat and keeps rubbing against its guide. Between 400 and 550 °C, the temperature it works at, ordinary chrome-silicon steel weakens: from 500 MPa at 500 °C its strength falls to 250 MPa at 600 °C, a 50 % drop. More boost and more revs add further to this load.

SUPERTECH makes them from a competition grade chrome-nickel stainless steel close to EV8 (21-4N), which keeps 650 MPa at 500 °C and 550 MPa at 600 °C, that is 30 % and then 120 % above the factory steel. A black nitride treatment hardens the surface, which curbs galling and reduces stem wear against the guide; the head is dished.

A +1 mm oversize version is also available: its head grows to 29.8 mm instead of 28.8 mm, with stem and length unchanged. The wider opening at the seat lets more air in and improves filling and therefore output, provided the seats are recut to that size.

Inlet valve technical specification

Part numberBrandSizeHead Ø
OEM 28.8 mm
Stem Ø
OEM 4.97 mm
LengthGroovesMaterial
MCIVN-1200S-8 SUPERTECH Standard 28.8 mm 4.96 mm 105.8 mm 1 Black nitrided stainless steel
MCIVN-1201S-8 SUPERTECH +1 mm 29.8 mm 4.96 mm 105.8 mm 1 Black nitrided stainless steel

MCIVN-1200S-8 and MCIVN-1201S-8: sets of 8 dished head valves, 5.8 mm stem tip.

Fitting details

PartMINI originalReinforced
Collets 11 34 1 438 142 (D 5) KPR-5.0-7S-32 (single groove)
Valve stem seals Kit 11 34 0 033 950 VSI-MIN-R56-8
Valve guide GDE-MIN-R56-STD-8*2

These valves have a single groove: SUPERTECH specifies its KPR-5.0/7S collets with them, to be fitted new.

The +1 mm version goes on inlet seats cut for a 29.8 mm head, workshop machining to plan together with the cylinder head rebuild.

Technical guide

The brand offered

SUPERTECH SUPERTECH has drawn racing valvetrain parts in San Jose, California, for three decades: valves, springs, guides. Each design is created for one specific cylinder head, is checked with ultrasound, X-rays and laser, then proves itself alongside engine builders, on track or at the drag strip.

How to choose

The groove is the slot in which the collets secure the valve beneath its retainer; both part numbers here have just one, so the head size alone decides.

CriterionOption 1Option 2
Size Standard size
28.8 mm head, suited to inlet seats still at the dimension set at the factory.
+1 mm oversize
29.8 mm head: larger seat opening and improved cylinder filling, around 10 to 12 cfm for each extra mm. Seats machined to this size; also a solution for seats touched up in the past.

When reinforced valves become necessary

  • More aggressive cam profile, firmer valve springs
  • Boost and rev limit raised by a remap
  • Larger or hybrid turbo fitted to the Prince
  • Cylinder head redone for racing, rallying or slalom
  • Worn original valves, seats already recut

Compatible vehicles

ModelEngine codePowerYears
Citroën C4 Coupé 1.6 THP EP6DT 140 hp 2008-2011
Citroën C4 Coupé 1.6 THP 150 EP6DT 150 hp 2008-2011
Citroën C4 I 1.6 THP 140 EP6DT 140 hp 2008-2011
Citroën C4 I 1.6 THP 150 EP6DT 150 hp 2008-2011
Citroën DS3 1.6 Racing EP6DTS 203 / 207 hp 2011-2015
Citroën DS3 1.6 THP 150 EP6DT 150 hp 2010-2015
Citroën DS3 1.6 THP 155 EP6DT 156 hp 2010-2015
Citroën DS3 1.6 THP 165 EP6DT 165 hp 2014-2015
Citroën DS3 1.6 THP160 EP6DT 163 hp 2012-2015
Citroën DS3 Cabrio 1.6 Racing EP6DTS 203 / 207 hp 2014-2015
Citroën DS3 Cabrio 1.6 THP 165 EP6DT 163 hp 2015
MINI Cabrio R57 Cooper S N14B16A 163 hp 2007-2015
MINI Cabrio R57 Cooper S N14B16A / N14B16AB 174 / 192 hp 2008-2010
MINI Cabrio R57 John Cooper Works N14B16C 211 hp 2008-2015
MINI Clubman R55 Cooper S N14B16A / N14B16AB 174 hp 2007-2010
MINI Clubman R55 Cooper S N14B16AB 163 hp 2007-2014
MINI Clubman R55 Cooper S John Cooper Works N14B16AB 192 hp 2008-2010
MINI Clubman R55 John Cooper Works N14B16C 211 hp 2007-2014
MINI Coupé R58 Cooper S N14B16A 184 hp 2010-2015
MINI Coupé R58 John Cooper Works N14B16C 211 hp 2010-2015
MINI R56 Cooper S N14B16A / N14B16AB 174 hp 2006-2010
MINI R56 Cooper S John Cooper Works N14B16A / N14B16AB 192 hp 2006-2010
MINI R56 John Cooper Works N14B16C 211 hp 2007-2013
MINI R56 John Cooper Works GP N14B16C 218 hp 2012-2013
MINI Roadster R59 John Cooper Works N14B16C 211 hp 2011-2015
Peugeot 207 1.6 16V RC EP6DTS 174 hp 2007-2012
Peugeot 207 1.6 16V Turbo EP6DT 150 / 156 hp 2006-2013
Peugeot 207 CC 1.6 16V Turbo EP6DT 150 / 156 hp 2007-2013
Peugeot 207 SW 1.6 16V RC EP6DTS 174 hp 2007-2012
Peugeot 207 SW 1.6 16V Turbo EP6DT 150 hp 2007-2012
Peugeot 308 CC 1.6 16V EP6DT 140 / 150 hp 2009-2014
Peugeot 308 I 1.6 16V EP6DT 140 / 150 hp 2007-2014
Peugeot 308 I 1.6 16V EP6DTS 174 hp 2008-2014
Peugeot 308 SW I 1.6 16V EP6DT 140 / 150 hp 2007-2014
Peugeot 308 SW I 1.6 16V EP6DTS 174 hp 2008-2014

OEM part number (inlet valve): 11 34 7 587 470 (MINI N14)

Important: one set of 8 equips a complete engine. The N18B16A and N18B16C, whose SUPERTECH valve is shorter, and the N12, N16, naturally aspirated EP6 and EP6CDT are not covered by this page.

Don't forget the exhaust valves

During a head rebuild, also replace the 8 exhaust valves of the Prince engine: a reinforced version for the same MINI and Peugeot is here:

Exhaust valves MINI Cooper S JCW N14 N18 Peugeot 207 308 EP6DT →

16 other products in the same category

Viewed products

Loading...